journal article·2023Open access

Preliminary Studies on Alkali-Activated Binder Based on Wood Waste Ash

André Augusto Silveira e Silva, Bruno Cherubini Fernandes Pereira, João Pedro Bittencourt Batista, Jorge Luís Akasaki, João Cláudio Bassan de Moraes

Materials Research· Volume 26· Issue suppl 1

Abstract

Alkali-activated binders (AAB) are inorganic materials produced by a mixture between a solid precursor and an alkaline activator, wherein, the reaction results in a material with properties similar to Portland cement hydration. The advantages of AAB over Portland cement are the possibility of using alternative materials, demanding low energy and low CO2 emission. The primary objective of this study was to produce an alkali-activated binder (AAB) using calcined wood waste ash (CWWA) as a solid precursor due to its beneficial properties. CWWA was obtained by burning wood wastes in a furnace, then calcined in a laboratory oven at 600 °C to remove unburned particles. Afterward, the ash was milled and then physiochemically characterized by chemical composition, X-ray diffraction (XRD), particle size distribution, and scanning electron microscopy (SEM). The milled CWWA was employed in AAB mortars and pastes activated with sodium hydroxide (NaOH) to assess the influence of alkaline activator concentration. In this work, the Na+ concentrations varied in the 6.5-12.5 mol.kg-1 range. Mortars were assessed by compressive strength, whereas pastes were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) for samples cured after 7 days at 60 °C. Results showed that the CWWA is mainly composed of SiO2 (67.9 wt%) and the presence of an amorphous phase and quartz as the main crystalline phase (XRD). The compressive strength of mortars showed that the CWWA activated with a Na+ concentration of 6.5 ml.kg-1 achieved the highest compressive strength (23.2 ± 1 MPa). Microstructural studies of pastes showed the formation of sodium carbonate (XRD) and reaction products (FTIR) in a dense microstructure (SEM/EDS). Hence, the key findings suggest that employing CWWA as a solid precursor offers a viable choice for producing a more sustainable AAB.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instituto Tecnológico de Aeronáutica, Brasil

Universidade Estadual Paulista, Brasil

References (20)

Show source-provided references
1. Mehta PK · 2006
2. Selectivity of alkaline activators for the activation of slags10.1520/CCA10306J ↗
3. Pacheco-Torgal F · 2015
4. Provis J · 2009
5. Sugar cane bagasse ash as a partial substitute of Portland cement: effect on mechanical properties and emission of carbon dioxide10.1016/j.jece.2020.103655 ↗
6. Sustainable use of rice husk ash in cement-based materials: environmental evaluation and performance improvement
7. Characterization and pozzolanic properties of sewage sludge ashes (SSA) by electrical conductivity
8. Partial replacement of wood ash with ordinary Portland cement and foundry sand as fine aggregate
9. 2022
10. Preliminary screening of wood biomass ashes for partial resources replacements in cementitious materials10.1016/j.jclepro.2019.04.321 ↗
11. Mechanical properties of mortars modified with wood waste ash10.1007/s13196-020-00258-w ↗
12. Design and properties of 100% waste-based ternary alkali-activated mortars: blast furnace slag, olive-stone biomass ash and rice husk ash10.1016/j.jclepro.2019.118568 ↗
13. New use of sugar cane straw ash in alkali-activated materials: a silica source for the preparation of the alkaline activator
14. Ash from timber waste as cement replacement material10.1016/S0958-9465(01)00039-7 ↗
15. The hybridizations of coal fly ash and wood ash for the fabrication of low alkalinity geopolymer load bearing block cured at ambient temperature10.1016/j.conbuildmat.2015.04.020 ↗
16. Behaviour of metakaolin-based geopolymers incorporating sewage sludge ash (SSA)10.1016/j.matlet.2016.05.137 ↗
17. Carbonation of cement paste: understanding, challenges, and opportunities10.1016/j.conbuildmat.2016.04.138 ↗
18. Pozzolanic reactivity studies on a biomass-derived waste from sugar cane production: sugar cane straw ash (SCSA)10.1021/acssuschemeng.6b00770 ↗
19. Alkali-activation potential of biomass-coal co-fired fly ash10.1016/j.cemconcomp.2016.06.014 ↗
20. Alkali activated materials based on fluid catalytic cracking catalyst residue (FCC): Influence of SiO2/Na2O and H2O/FCC ratio on mechanical strength and microstructure10.1016/j.fuel.2013.02.052 ↗