journal article·2019Open access

Microstructure and Fracture of 50Mo-50Re Vacuum Brazed with Fe-Si-B Filler Metal

Chunzhi Xia, Yang Li, Yongyong Gong, Lei Wu, Peng Liu, Yajiang Li

Materials Research· Volume 22· Issue 4

Abstract

Microstructural evolution, interfacial reaction and fracture during vacuum brazing of 50Mo-50Re alloys using amorphous alloy Fe-5.6Si-2.6B(wt%) were investigated. A binary intermetallic compound, σ(Mo2Re3) formed as parallel contiguous layers in the diffusion zone. In addition, Fe from the braze alloy, in combination with dissolved Mo from the substrate, formed two layers of binary compounds µ-Mo6Fe7 and λ-MoFe2, adjacent to diffusion zone. The unreacted Fe-based filler metal solidified as α-Fe solid solution. Fracture analysis showed that the mode of failure was mainly transgranular cleavage with partly intergranular and the fracture located on the interface of 50Mo-50Re alloy and the central area of brazing seam.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Jiangsu University of Science and Technology, China

Shandong Jianzhu University, P. R. China

Shandong University, China

References (17)

Show source-provided references
1. Manufacture and properties of molybdenum rhenium alloys
2. Effect of a small amount of additional carbon on the ductility of recrystallized sintered-molybdenum sheet10.1016/0022-3115(78)90517-2 ↗
3. Characteristics of EB-weldable molybdenum and Mo-Re alloys10.1007/BF03223314 ↗
4. Kramer DP · 2000 · 956
5. A novel study on laser lap welding of refractory alloy 50Mo-50Re of small-scale thin sheet10.1016/j.vacuum.2016.11.001 ↗
6. The small-scale resistance spot welding of refractory alloy Mo-50Re thin sheet10.1007/s11837-008-0096-x ↗
7. Rhenium effect in irradiated mo-re alloys and welds10.13189/ujms.2014.020201 ↗
8. Radiation-induced strengthening in EB welds of Mo-Re alloys during high temperature neutron irradiation10.1016/j.jnucmat.2010.12.183 ↗
9. Embrittlement of molybdenum-rhenium welds under low and high temperature neutron irradiation10.1016/j.jnucmat.2013.10.027 ↗
10. Effect of heat treatment on mechanical behavior of electron beam welded sintered molybdenum10.1016/0022-3115(89)90242-0 ↗
11. Microstructure and properties of 3D printed Inconel 718 joint brazed with BNi-2 amorphous filler metal
12. Effect of Ni-Ti filler on brazed W-Cu/18-8 joints10.1016/j.jmatprotec.2018.04.018 ↗
13. Phase constitution and fracture analysis of vacuum brazed joint of 50Mo-50Re refractory alloys10.1016/j.vacuum.2016.11.030 ↗
14. Microstructure and properties of W-Cu composite/Fe-based powder alloy vacuum brazed joint with different filler metals10.1515/htmp-2015-0258 ↗
15. Microstructural and mechanical property changes with aging of Mo-41Re and Mo-47.5Re alloys10.1016/j.jnucmat.2007.03.027 ↗
16. Structural identification of phases in Mo-Re alloys within the range from 5 to 95% Re10.1016/S0924-0136(03)00342-X ↗
17. Massalski TB · 1987