Sustainability and Efficiency: Comparative Analysis of Vegetable-Based and Synthetic Cutting Fluids in SAE 1045 Steel Turning
Source abstract
Abstract
The use of mineral oil-based fluids in machining processes can lead to social and environmental problems. Therefore, the objective of this study is to perform a comparative technical-economic analysis between biodegradable emulsions based on babassu oil, castor oil and a commercial synthetic fluid during cylindrical turning of SAE 1045 steel. The formulations' impact on tool wear and durability at varying cutting speeds (90, 70 and 50 m/min) and on the surface roughness of the workpiece was analyzed. Economically, the costs per production volume were compared, using data from the machining tests. The tests demonstrated that the babassu oil-based emulsion provided the longest tool life, reaching 65.31 minutes. The synthetic fluid provided the best surface roughness results. In the economic analysis, the synthetic fluid was advantageous at a speed of 90 m/min, and below this value the castor oil-based emulsion stood out.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de Pernambuco, Brasil
Petrobras, Brasil
Funding
CNPq · FACEPE
References (43)
Show source-provided references
1. Sustainable manufacturing: modeling and optimization challenges at the product, process and system levels10.1016/j.cirpj.2010.03.006 ↗
2. Machado AR · 2015
3. Sustainable machining: a review
4. Review of lubrication and cooling in computer numerical control (CNC) machine tools: a content and visualization analysis, research hotspots and gaps10.3390/su15064970 ↗
5. Exploratory data analysis & EDS analysis on tool chip adhesion under dry and nano minimum quantity lubrication machining environment
6. Effect of vibration and cutting zone temperature on surface topography during hybrid cooling/lubrication assisted machining of Vanadis 10
7. Influence of laser parameters on the machining performance of textured cutting tools10.1016/j.optlastec.2023.109569 ↗
8. Biodegradable cutting fluids for sustainable manufacturing: a review of machining mechanisms and performance10.1007/s00170-024-13132-7 ↗
9. Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment10.1007/s00170-019-04890-w ↗
10. Sustainable development of cutting fluids: the comprehensive review of vegetable oil
11. Formulation, characterization, mechanism, and application of vegetable oil-based nano-cutting fluids10.1007/s00170-024-14973-y ↗
12. Kaitwade N · 2024
13. A review on recent development of minimum quantity lubrication for sustainable machining10.1016/j.jclepro.2020.122165 ↗
14. Flooding application of vegetable-and mineral-based cutting fluids in turning of AISI 1050 steel10.3390/lubricants10110309 ↗
15. Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components10.1016/j.ijmachtools.2011.12.006 ↗
16. Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling10.1016/j.cirp.2014.03.067 ↗
17. Surface integrity in material removal processes: recent advances10.1016/j.cirp.2011.05.002 ↗
18. Advances in the application of vegetable-oil-based cutting fluids to sustainable machining operations: a review10.3390/lubricants10040069 ↗
19. Vegetable oil-based cutting fluids and its behavioral characteristics in machining processes: a review10.1108/ILT-12-2020-0482 ↗
20. Gestão de tratamentos resíduos de usinagem: proposta viável para mitigações ambientais
21. Influence of nonionic surfactant hydrophobicity on the tribological properties of microemulsion systems aimed at cutting fluid applications10.1590/1980-5373-mr-2021-0584 ↗
22. Design of hard water stable emulsifier systems for petroleum-and bio-based semi-synthetic metalworking fluids10.1021/es034437t ↗
23. The effect of vibration and cutting zone temperature on surface roughness and tool wear in eco-friendly MQL turning of AISI D210.1016/j.jmrt.2020.01.010 ↗
24. Experimental investigation of the derivative cutting when machining AISI 1045 with micro-textured cutting tools10.3390/met13091587 ↗
25. Application of sustainable techniques in metal cutting for enhanced machinability: a review10.1016/j.jclepro.2015.03.039 ↗
26. Performance of non-edible oils as cutting fluids for green manufacturing10.1080/10426914.2022.2136388 ↗
27. Biological stability of water-based cutting fluids: progress and application10.1186/s10033-021-00667-z ↗
28. A comprehensive review on research developments of vegetable-oil based cutting fluids for sustainable machining challenges10.1016/j.jmapro.2021.05.002 ↗
29. Past and current status of eco-friendly vegetable oil based metal cutting fluids10.1016/j.matpr.2017.02.275 ↗
30. Development of biolubricants from vegetable oils via chemical modification10.1016/j.jiec.2016.02.008 ↗
31. Jawahir IS · 2007
32. Application of vegetable oil-based metalworking fluids in machining ferrous metals: a review10.1016/j.ijmachtools.2011.09.003 ↗
33. Environmental friendly cutting fluids and cooling techniques in machining: a review10.1016/j.jclepro.2014.07.071 ↗
34. Surface integrity characterization of hardened AISI 4340 steel in grinding process with biodegradable formulations of cutting fluids10.1590/1980-5373-mr-2016-0658 ↗
35. Nanoparticle-based lubrication during machining: synthesis, application, and future scope: a critical review10.1007/s00170-025-15065-1 ↗
36. Improving the novel white coconut oil-based metalworking fluid using nanoparticles for minimum surface roughness and tool tip temperature
37. Experimental analysis on tribology properties of bio lubricant canola oil with nano powder calcium carbonate as coolant media10.1063/5.0198574 ↗
38. Alumina-enriched sunflower bio-oil in machining of Hastelloy C-276: a fuzzy Mamdani model-aided sustainable manufacturing paradigm10.1038/s41598-024-80254-z ↗
39. Evaluation of formulated jatropha oil as cooling and lubricating cutting fluids in turning of AISI 1525 steel employing Taguchi-TOPSIS technique
40. França LJ · 2018
41. 2017
42. Effect of built-up edge formation during stable state of wear in AISI 30410.3390/ma10111230 ↗
43. Research on chip shear angle and built-up edge of slow-rate machining EN C45 and EN 16MnCr5 steels