journal article·2019Open access

Enrichment of Copper, Lead, and Tin by Mechanical Dry Processing of Obsolete Printed Circuit Board Residues

Marcelle de Fátima da Silva, Achilles Junqueira Bourdot Dutra, Marcelo Borges Mansur

Materials Research· Volume 22· Issue 5

Abstract

Waste printed circuit boards (WPCB) residues were mechanically processed to concentrate their metal content aiming to reduce costs of the subsequent recovery of copper, tin, and lead. A fully dry route was proposed to avoid the generation of liquid effluents that would require additional treatment. Firstly, 10.7% of the residue was segregated by magnetic separation; the remaining nonmagnetic fraction was comminuted and sieved. Ceramic and polymer materials (1/3 of the total weight) concentrated in the finer and the coarser size fractions, while metallic materials (2/3 of the total weight) concentrated in the intermediate size fraction (90.7, 94.5, and 95.6% of the total copper, tin, and lead contained in the milled WPCB, respectively). The fractions between 0.3-1.20 mm were submitted to gravity separation using a zig-zag air classifier; enrichment of copper (from 43±11% to 68±5%), tin (from 10±3% to 17±1%), and lead (from 4±1% to 6.4±0.5%) were obtained.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Recycling and Waste Management Techniques · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Rio de Janeiro (UFRJ), Brasil

References (27)

Show source-provided references
1. Utilization of life cycle assessment methodology to compare two strategies for recovery of copper from printed circuit board scrap10.1016/j.jclepro.2013.07.051 ↗
2. Environmental emission analysis of a waste printed circuit board-derived adsorbent production process10.1016/j.cej.2017.05.181 ↗
3. Recovery of materials from waste printed circuit boards by vacuum pyrolysis and vacuum centrifugal separation10.1016/j.wasman.2010.06.012 ↗
4. Sustainable recycling process recovery for metals recovery from used printed circuit boards (PCBs)10.1016/j.susmat.2018.e00066 ↗
5. The recovery of metals from electronic scrap
6. Recycling technologies for the treatment of end of life printed circuit boards (PCBs)10.1108/03056120310460801 ↗
7. Recovery of copper from printed circuit boards scraps by mechanical processing and electrometallurgy10.1016/j.jhazmat.2006.05.010 ↗
8. WEEE recovery strategies and the WEEE treatment status in China10.1016/j.jhazmat.2006.04.060 ↗
9. The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites10.1016/j.jhazmat.2008.07.008 ↗
10. Direct recovery of copper from printed circuit boards (PCBs) powder concentrate by a simultaneous electroleaching-electrodeposition process10.1016/j.hydromet.2014.06.005 ↗
11. Recovery of Cu and Fe from printed circuit board waste sludge by ultrasound: Evaluation of industrial application10.1016/j.jclepro.2009.06.012 ↗
12. Utilization of magnetic and electrostatic separation in the recycling of printed circuit boards scrap10.1016/j.wasman.2004.09.009 ↗
13. Application of corona discharge and electrostatic force to separate metals and nonmetals from crushed particles of waste printed circuit boards10.1016/j.elstat.2006.08.004 ↗
14. Recovery of metals from waste printed circuit boards by a mechanical method using a water medium10.1016/j.jhazmat.2008.11.060 ↗
15. A new technology for recycling materials from waste printed circuit boards10.1016/j.jhazmat.2009.10.083 ↗
16. Reciclagem do lixo de informática: uma oportunidade para a química10.1590/S0100-40422012000700035 ↗
17. Recovery of metallic concentrations from waste printed circuit boards via reverse flotation10.1016/j.wasman.2016.11.019 ↗
18. Triboelectric separation technology for removing inorganics from non-metallic fraction of waste printed circuit boards: influence of size fraction and process optimization10.1016/j.wasman.2016.08.010 ↗
19. Recycling of metals from pretreated waste printed circuit boards effectively in stirred tank reactor by a moderately thermophilic culture10.1016/j.jbiosc.2016.12.017 ↗
20. New technology for recovery residual metals from nonmetallic fractions of waste printed circuit boards10.1016/j.wasman.2017.03.030 ↗
21. Recovery of high purity precious metals from printed circuit boards10.1016/j.jhazmat.2008.09.043 ↗
22. Pacheco AMV · 1981
23. Szekely J · 1971
24. Printed circuit board recycling: physical processing and copper extraction by selective leaching10.1016/j.wasman.2015.08.030 ↗
25. Fan LS · 1998
26. Copper and metals concentration from printed circuit boards using zig-zag classifier10.1016/j.jmrt.2018.05.003 ↗
27. Sagratzki NL · 1975