journal article·2019Open access

Effects of Geometrical Feature on Microstructures and Mechanical Properties of Refill Friction Stir Spot Welding 6061 Aluminum Alloy

Camila Albuquerque Fernandes, Severino Leopoldino Urtiga Filho, Uceu Suhuddin, Jorge Fernandez dos Santos

Materials Research· Volume 22· Issue 6

Abstract

Refill friction stir spot welding (refill FSSW) is a solid state joining technology developed and patented by Helmholtz-Zentrum Geesthacht. Refill FSSW is a welding process suitable for spot joining lightweight materials in similar and dissimilar joint configuration. The result is a spot welded in lap configuration with minimal material loss and a flat surface with no keyhole. In the present study, refill FSSW was applied to join the similar 6061 aluminum alloy sheet with 1.25 mm thickness. The objective of this work is to investigate the influence of the hook on the microstructure and mechanical properties of the weld. The hook is a geometrical feature, formed as a result of the upward bending of the sheet interface during the sleeve plunge and retraction during welding. The weld strength had a negative correlation with the hook height, however it was concluded that the shape of hook changes according to the combination of process parameters. The highest value of the lap shear corresponded to the smallest hook height.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de Pernambuco, Brasil

Helmholtz-Zentrum Geesthacht, Germany

References (11)

Show source-provided references
1. Schilling C · 1999
2. Microstructural evolution of 6063 aluminum during friction-stir welding10.1007/s11661-999-0251-1 ↗
3. Rosendo TS · 2009
4. Friction Spot And Friction Stir Spot Welding Processes - A Literature Review
5. Hook formation and mechanical properties of friction spot weldind in alloy 6061-T610.1016/j.jmatprotec.2015.11.026 ↗
6. Tier M · 2008 · 2287
7. Intermixing in dissimilar friction stir spot weds10.1007/s11661-006-9067-4 ↗
8. Microstructure and mechanical properties of friction spot welded 6061-T4 aluminum alloy10.1016/j.matdes.2013.08.021 ↗
9. The thermal cycle during the dissimilar friction spot welding of aluminum and magnesium alloy10.1016/j.scriptamat.2012.09.008 ↗
10. A sub-structural analysis of friction stir welded joints in an AA6056 Al-alloy in T4 and T6 temper conditions10.1016/j.msea.2006.12.055 ↗
11. Microstructural analysis of stir zone of Al alloy produced by friction stir spot welding10.1179/136217108X347601 ↗