journal article·2021Open access

Study of the Effect of Solvent on the Conductivity of Langmuir-Schaefer Films of Poly(Fullerene)s

Lucas K. M. Roncaselli, Edilene A. Silva, Hasina H. Ramanitra, Meera Stephen, André V. S. Simõis, Didier Bégué, Deuber Lincon Silva Agostini, Roger C. Hiorns, Clarissa A. Olivati

Materials Research· Volume 24· Issue suppl 1

Abstract

The present work aims to prepare and characterize very thin films of poly(fullerene)s in order to investigate their electrical properties and the influence of xylene and chloroform solvents on these materials. The fullerenes studied were phenyl-C61-butyric acid methyl ester (PCBM), oligo{(phenyl-C61-butyric acid methyl ester)-alt-[1,4-bis(bromomethyl)-2,5-bis(octyloxy)benzene]} (OPCBMMB) and poly{[bispyrrolidino(phenyl-C61-butyric acid methyl ester)]-alt-[2,5-bis(octyloxy) benzene]} (PPCBMB), along with poly(3-hexylthiophene) (P3HT). The Langmuir-Schaeffer technique was used to prepare films, which were deposited on interdigitated gold substrates, and electrically characterized, with emphasis on the study of transport, conductivity and mobility mechanisms with respect to the solvents used. We found that the addition of P3HT significantly increased the conductivity of these materials. The xylene cast PPCBM, in both pure and mixed forms under dark conditions, presented the best conductivity results with respect to the other materials. However, when chloroform was used, it was found that OPCBMMB in both pure and mixed forms under light, exhibited the best conductivities. This is the first treatment, to our knowledge, of the impact of solvents on the electronic properties of poly(fullerene)s.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Fullerene Chemistry and Applications · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Estadual Paulista, Brasil

CNRS/Université de Pau et des Pays de l'Adour, France

Universidade Estadual Paulista, Brasil; CNRS/Université de Pau et des Pays de l'Adour, France

References (36)

Show source-provided references
1. Femtosecond dynamics of excitons and hole-polarons in composite P3HT/PCBM nanoparticles10.1021/jp308876z ↗
2. The effect of solution processing on the power conversion efficiency of P3HT-based organic solar cells10.1016/j.egypro.2014.06.029 ↗
3. The mechanisms for introduction of n-dodecylthiol to modify the P3HT/PCBM morphology10.1016/j.orgel.2010.01.017 ↗
4. Evolution of structure, optoelectronic properties, and device performance of polythiophene:fullerene solar cells during thermal annealing10.1002/adfm.201002300 ↗
5. Co-solvent effects on the morphology of P3HT:PCBM thin films10.1016/j.synthmet.2011.08.005 ↗
6. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends10.1002/adfm.200500339 ↗
7. The recent advances in C60 micro/nanostructures and their optoelectronic applications
8. Recent advances of water-soluble fullerene derivatives in biomedical applications10.2174/1570193X15666180712114405 ↗
9. Complexation with C60 fullerene increases doxorubicin efficiency against leukemic cells in vitro10.1186/s11671-019-2894-1 ↗
10. PEGylated fullerene/iron oxide nanocomposites for photodynamic therapy, targeted drug delivery and MR imaging10.1016/j.biomaterials.2013.08.049 ↗
11. Medicinal applications of fullerenes
12. Sterically controlled azomethine ylide cycloaddition polymerization of phenyl-C61-butyric acid methyl ester10.1039/C6CC01380E ↗
13. Synthesis of main-chain poly(fullerene)s from a sterically controlled azomethine ylide cycloaddition polymerization10.1021/acs.macromol.5b02793 ↗
14. Main-chain fullerene polymers for photovoltaic devices10.1021/ma900279a ↗
15. Oligo- and poly(fullerene)s for photovoltaic applications: modeled electronic behaviors and synthesis10.1002/pola.28502 ↗
16. In situ generation of fullerene from a poly(fullerene)10.1002/polb.24888 ↗
17. Increased thermal stabilization of polymer photovoltaic cells with oligomeric PCBM10.1039/C6TC03290G ↗
18. Solubility of fullerene (C60) in a variety of solvents10.1021/j100115a049 ↗
19. C60 in model biological systems. a visible-UV absorption study of solvent-dependent parameters and solute aggregation10.1021/j100064a035 ↗
20. Morphological study of P3HT:PCBM blend films prepared through solvent annealing for solar cell applications10.1016/j.solmat.2010.09.004 ↗
21. Sze SM · 2006
22. Metal-polymer Schottky barriers on processible polymers10.1016/0379-6779(89)90591-2 ↗
23. Electrical conductivity in doped polyacetylene10.1103/PhysRevLett.39.1098 ↗
24. Regioregularity and deposition effect on the physical/chemical properties of polythiophene derivatives films
25. Theoretical and experimental determination of cell constants of planar-interdigitated electrolyte conductivity sensors10.1016/0925-4005(95)85053-8 ↗
26. The influence of molecular configuration on the thermoelectrical properties of poly(3-hexylthiophene)10.1007/s11664-015-4045-5 ↗
27. Hopping transport in conductive heterocyclic oligomers: reorganization energies and substituent effects10.1021/ja0461421 ↗
28. Influence of nanomorphology on the photovoltaic action of polymer-fullerene composites10.1088/0957-4484/15/9/035 ↗
29. Transport of holes in uniformly and non-uniformly protonated poly(o-methoxyaniline)10.1016/S0009-2614(97)00302-3 ↗
30. IR absorption, photoinduced IR absorption, and photoconductivity of polyaniline10.1016/0379-6779(89)90329-9 ↗
31. Massive polarons in large-energy-gap polymers10.1103/PhysRevB.39.10174 ↗
32. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
33. Device physics of polymer:Fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
34. Insights into solvent vapor annealing on the performance of bulk heterojunction solar cells by a quantitative nanomorphology study10.1039/c3ra45619f ↗
35. Oxygen doping of P3HT:PCBM blends: Influence on trap states, charge carrier mobility and solar cell performance
36. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗