The Wire Drawing Mechanics of Near-Equiatomic NiTi SMA
Source abstract
Abstract
The wire drawing mechanic of Ti-49.82Ni (at. %) Shape Memory Alloy (SMA) was investigated through the true stress-strain curves and drawing stresses. The tensile tested solution treated wire presented a four steps elongation at temperatures below the austenite finish temperature (AF), and a conventional one-step behavior above the martensite deformation temperature (MD). The tensile yield stress for the formation of detwinned martensite (DTM) or stress-induced martensite (SIM) increased as the testing temperature increased; however, for larger deformation, the behavior reversed. The efficiency of drawing work, which is the ratio of uniform work to total work, increased from 10% for 0.07 mm2.mm-2 area reduction at 25 °C to 50% for 0.21 mm2.mm-2 at 110 °C. Therefore, wire drawing temperature and area reduction should be combined to increase the efficiency, taking into account the desired properties with reasonable workability. Furthermore, transformation work should be considered on wire drawing shape memory alloys as phase transformation occurs in temperatures below MD.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Tecnológico de Aeronáutica, Brazil
Centro Tecnológico da Marinha, Brasil
References (17)
Show source-provided references
1. Otsuka K · 1998
2. Development of Shape Memory Alloys10.2355/isijinternational.29.353 ↗
3. Physical metallurgy of Ti-Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
4. SMA microgripper with integrated antagonism10.1016/S0924-4247(99)00385-4 ↗
5. Recent Development in TiNi-based Shape Memory Alloys
6. Mechanical Performance of Nickel-titanium Archwires10.1590/1516-1439.003615 ↗
7. The fracture evaluation of NiTi SMA endodontics files10.1590/S1516-14392007000400012 ↗
8. Low carbon content NiTi shape memory alloy produced by electron beam melting10.1590/S1516-14392004000200008 ↗
9. Thermal effects in a mechanical model for pseudoelastic behavior of NiTi wires10.1590/S1516-14392007000400011 ↗
10. Kumar PK · 2008 · 1
11. Criteria for pseudoelasticity in near-equiatomic NiTi shape memory alloys10.1016/S1359-6454(97)00144-4 ↗
12. Wright R · 2011 · 25
13. 2010
14. A study on the wire drawing of TiNi shape memory alloys10.1016/0921-5093(96)10369-5 ↗
15. 2016
16. Optimisation of processing and properties of medical grade Nitinol wire
17. Influence of Thermomechanical Processing on the Martensitic Transformation Temperatures of NiTi SMA Wire10.4028/www.scientific.net/MSF.643.43 ↗