journal article·2014-09-22Open access

Effect of phase transformations on hardness in Zn-Al-Cu Alloys

Jose David Villegas-Cardenas, Maribel Leticia Saucedo-Muñoz, Victor Manuel Lopez-Hirata, Hector Javier Dorantes-Rosales, Jorge Luis Gonzalez-Velazquez

Materials Research· Volume 17· Issue 5

Abstract

Sixteen Zn-Al-Cu alloy compositions were prepared by melting pure elements. The as-cast alloys were homogenized at 350 °C for 180 h. Both the as-cast and homogenized alloys were analyzed with X-ray diffractometer and EDX-scanning electron microscope. The Rockwell “B” hardness of both the as-cast and homogenized alloys was determined using the standard procedure. The X-ray diffraction patterns and scanning electron micrographs indicated the presence of several phases in the as-cast alloys. Some of them do not correspond to those shown in the equilibrium Zn-Al-Cu phase diagram at low temperatures. However, the homogenized alloys showed most of the phases predicted by the equilibrium diagram. The hardness of alloys increases with the Cu content because of the presence of Cu-containing phases such as, the θ and τ’ phases in both alloys. The hardness of the homogenized alloys was lower than that of the as-cast alloys as a result of the elimination of the dendritic structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instituto Politecnico Nacional, Mexico; Universidad Politecnica del Valle de Mexico, Mexico

Instituto Politecnico Nacional, Mexico

References (9)

Show source-provided references
1. Flow behavior of a superplastic Zn-22% Al alloy processed by equal channel angular pressing
2. Superplastic and interface analysis in materials
3. On the fine grained lamellar microstructure transformation in Zn-20 2% Al-1.8% Cu alloy10.1007/BF00742180 ↗
4. Thermal treatments of as-extruded eutectoid Zn-21 2Al-1.9 wt%Cu Alloy10.1007/BF00258174 ↗
5. The Development of a family zinc-base foundry alloys
6. General rule of phase decomposition in Zn-Al based alloys (II)-on effects of external stresses on phase transformation10.2320/matertrans.45.3083 ↗
7. Influence of different Al contents on microstructure, tensile and wear properties of Zn-based alloy
8. Börnstein L · 2005 · 11 · 71
9. 2008