journal article·2022Open access

Investigation of Residual Stresses within a Friction Welded Steel Pipeline by the Contour and X-ray Diffraction Methods

Igor Luis Diehl, Gustavo Cordenonsi da Fonseca, Thomas Gabriel Rosauro Clarke

Materials Research· Volume 25

Abstract

Residual stresses (RS) in pipes welded by a fully automated friction welding process, called FRIEX, are investigated using the contour method (CM) and the X-ray diffraction method (XRD). Samples were produced using a self-developed equipment, which is based on the interaction between a consumable intermediate rotary ring and two stationary pipe sections, by varying the loading rate applied during the welding of API 5L B pipes with an API X65 ring. Mechanical and metallurgical properties were locally analyzed through metallography and microflat tensile tests. RS measured by XRD and CM showed comparable values; tensile zones were found in the pipe HAZ and compressive stresses were found in its adjacent areas. Tensile RS of approximately half the local yield strength of the components were also found, mostly on the internal surface, and their values decrease with increasing welding loads. Microflat tensile tests showed an increase in yield strength of pipe TMAZ and HAZ, with a clear influence of loading rates.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Rio Grande do Sul, Brasil

References (18)

Show source-provided references
1. Study of microstructural evolution of friction taper plug welded joints of C-Mn steels10.1179/136217110X12720264008556 ↗
2. Influence of forge pressure on properties of friction welded pipelines using intermediate ring10.1179/174329308X341870 ↗
3. 2000
4. Pipeline girth friction welding of the UNS S32205 duplex stainless steel10.1016/j.matdes.2018.11.046 ↗
5. Parameter optimisation for automatic pipeline girth welding using a new friction welding method10.1016/j.matdes.2008.05.073 ↗
6. Friction butt-welding machine for tubular elements
7. Residual stress evaluation in API 5L X65 girth welded pipes joined by friction welding and gas tungsten arc welding10.1016/j.jmrt.2018.07.009 ↗
8. Methods of measuring residual stresses in components10.1016/j.matdes.2011.08.022 ↗
9. Prime MB · 2000 · 617
10. Stewart M · 2016 · 159
11. Towards friction welding to API Grade B steel pipes
12. A review on welding of high strength oil and gas pipeline steels10.1016/j.jngse.2016.12.039 ↗
13. Johnson G · 2008
14. Prime MB · 2013 · 109
15. Preliminary study on the microstructure and mechanical properties of dissimilar friction stir welds in aircraft aluminium alloys 2024-T351 and 6056-T410.1016/j.jmatprotec.2007.12.008 ↗
16. Cullity BD · 2014
17. Hauk V · 1997
18. Effect of prestraining on Barkhausen noise vs. Stress relation10.1016/S0963-8695(00)00073-6 ↗