Geometric effects of sustainable auxetic structures integrating the particle swarm optimization and finite element method
Source abstract
Abstract
The development of new materials based on industrial wastes has been the focus of much research for a sustainable world. The growing demand for tyres has been every year exacerbating environmental problems due to indiscriminate disposal in the nature, making a potentially harmful waste to public health. The incorporation of rubber particles from scrap tyres into polymeric composites has achieved high toughness and moderate mechanical properties. This work investigates the geometric effects (thickness, width and internal cell angle) of auxetic structures made of recycled rubber composites based on experimental and numerical data. The response surface models integrated with the swarm intelligence and finite element analysis were proposed in order to obtain a range of solutions that provides useful information to the user during the selection of geometric parameters for reentrant cells. The results revealed the cell thickness ranges from 39-40 mm and 5.98-6 mm, and the cell angle range from -0.01 to -0.06º maximize the ultimate strength. The same parameters were able to optimize the modulus of elasticity of rubber auxetic structures, excepting for the angle factor which must be set between -30º and 27.7º. The optimal Poisson's ratio was found when the cell angle ranged from -30º to -28.5º, cell width ranged from 5-5.6 mm and 2 mm in thickness.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Structural Response to Dynamic Loads · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Federal University of São João del Rei - UFSJ, Brazil
University of Bristol, UK
References (31)
Show source-provided references
1. Ruzzene M · 2003 · 1
2. Auxetic materials: the positive side of being negative10.1049/esej:20000402 ↗
3. Gibson LJ · 1997
4. An improved analytical model for the elastic constants of auxetic and conventional hexagonal honeycombs10.1177/026248931103000602 ↗
5. Geometric effects on micropolar elastic honeycomb structure with negative Poisson's ratio using the finite element method10.1016/S0168-874X(02)00066-5 ↗
6. Modelling the effects of density variations on the in-plane Poisson's ratios and Young's moduli of periodic conventional and re-entrant honeycombs - Part 1: Rib thickness variations
7. Dielectric properties of chiral honeycombs: modelling and experiment10.1016/j.compscitech.2009.08.017 ↗
8. Simultaneous optimization of the electromagnetic and mechanical properties of honeycomb materials10.1117/12.474693 ↗
9. Dynamic crushing of auxetic open-cell polyurethane foam
10. Damping modelization of auxetic foams10.1117/12.384574 ↗
11. Indentability of conventional and negative Poisson's ratio foams10.1177/002199839302701203 ↗
12. Mechanical Performance of Auxetic Polyurethane foam for antivibration glove applications10.1177/026248930502400501 ↗
13. The plastic collapse of sandwich beams with a metallic foam core10.1016/S0020-7403(00)00069-2 ↗
14. Snyder RH · 1986
15. Brydon JA · 1988
16. Barlow FW · 1993
17. Panzera TH · 2009
18. Crawford RJ · 1985
19. Effects of rubber addition to an epoxy resin and its fiber glass reinforced composite10.1002/pc.21265 ↗
20. Investigation of free volume and the interfacial, and toughening behavior for epoxy resin/rubber composites by positron annihilation10.1016/j.radphyschem.2007.05.002 ↗
21. Utilization of solid wastes in construction materials
22. Preliminary investigations on auxetic structures based on recycled rubber10.1002/pssb.201084225 ↗
23. Tailoring materials with prescribed elastic properties10.1016/0167-6636(94)00069-7 ↗
24. Prediction of structures and mechanical properties of composites using a genetic algorithm and finite element method10.1023/A:1004818203253 ↗
25. Models for the elastic deformation of honeycombs10.1016/S0263-8223(96)00054-2 ↗
26. Design and optimization of microstructure of auxetic materials10.1108/02644401211212398 ↗
27. Incorporation of rubber wastes into thermorigid polymeric matrix composites
28. Numerical and experimental uniaxial loading on in-plane auxetic honeycombs10.1243/0309324001514152 ↗
29. Kennedy J · 1995 · 1942
30. Kennedy J · 1997 · 303
31. Application of homogenization FEM analysis to regular and reentrant honeycomb structures10.1007/BF00352675 ↗