journal article·2015-12-04Open access

Development and Applications of Highly Functional Al-based Materials by Use of Metastable Phases

Akihisa Inoue, Fanli Kong, Shengli Zhu, Chain Tsuan Liu, Fahad Al-Marzouki

Materials Research· Volume 18· Issue 6

Abstract

This paper reviews the features of alloy components, structure and mechanical properties, physical and chemical properties of metastable Al-based alloys developed by use of various liquid or vapor quenching-induced phases such as amorphous, quasicrystalline, nanocrystalline, nanocomposite, supersaturated solid solution and structure gradient phases. As advantages of the metastable Al-based alloys, one can exemplify a high tensile strength of 1500 MPa for amorphous alloys, high elevated temperature strength of 364 MPa at 573 K for nanoquasicrystalline alloys, high strength of 1000 MPa at room temperature and 520 MPa at 473 K for nanocrystalline alloys, relatively high strength of 596 MPa with large elongation of 16% for nanocomposite alloys and high strength of 900 MPa and distinct elongation of 5% for supersaturated fcc-Al solid solution. These highly functional properties, which have not been obtained for conventional crystalline Al-based alloys, have enabled the commercialization of metastable Al-based alloys as structural, machinery and sporting goods materials. Owing to the significant increase of various fundamental properties caused by the essential differences in the structures, the engineering importance of the metastable Al-based alloys is expected to increase steadily in the future low carbon and nature harmonious society.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Quasicrystal Structures and Properties · Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Tianjin University, China; Josai International University, Japan; King Abdulaziz University, Saudi Arabia

Josai International University, Japan

Tianjin University, China

City University of Hong Kong, China

King Abdulaziz University, Saudi Arabia

References (59)

Show source-provided references
1. Fabrications and mechanical properties of bulk amorphous, nanocrystalline, nanoquasicrystalline alloys in aluminum-based system10.1016/S1471-5317(00)00004-3 ↗
2. Ductile aluminium-base amorphous alloys with two separate phases10.1007/BF01728983 ↗
3. New amorphous alloys with good ductility in Al-Ce-M (M=Nb, Fe, Co, Ni or Cu) systems10.1143/JJAP.27.L1796 ↗
4. New amorphous Al-Y, Al-La and Al-Ce alloys prepared by melt spinning10.1143/JJAP.27.L736 ↗
5. Aluminum-based amorphous alloys with tensile strength above 980 MPa (100 kg/mm 2)10.1143/JJAP.27.L479 ↗
6. Synthesis and properties of metallic glasses that contain aluminum10.1126/science.241.4873.1640 ↗
7. Unique metallic glass formability and ultra-high tensile strength in Al Ni Fe Gd alloys10.1016/0956-7151(93)90064-Y ↗
8. Synthesis and properties of aluminum-based metallic glasses containing rare earths10.1016/0925-8388(94)90238-0 ↗
9. Al-Ni-Y-Co amorphous alloys with high mechanical strengths, wide supercooled liquid region and large glass-forming capacity.10.2320/matertrans1989.31.493 ↗
10. Ductile Al-Ni-Zr amorphous alloys with high mechanical strength10.1007/BF00723766 ↗
11. Formation of metal-metal type aluminum-based amorphous alloys10.1007/BF02662599 ↗
12. Recent progress of aluminum base amorphous alloys
13. Ultrahigh strength Al-based amorphous alloys containing Sc10.1557/JMR.2004.0206 ↗
14. Production of Al-based amorphous alloy wires with high tensile strength by a melt extraction method10.2320/matertrans1989.35.485 ↗
15. Production of Al-based amorphous sheets with large thickness by a supercooled liquid-quenching method10.1007/BF00735660 ↗
16. Aluminum-base amorphous powders with flaky morphology prepared by a two-stage quenching technique10.2320/matertrans1989.30.1033 ↗
17. Study on the production of flaky amorphous alloy powders by impact flattening of atomized liquid droplets on a rapidly rotating wheel
18. Fabrication of aluminum coating with dispersed nanoscale quasicrystalline particles by cold spray10.2320/jinstmet.73.421 ↗
19. Production of Al-based amorphous alloys by a metallic mold casting method and their thermal stability
20. Microstructure and properties of bulky Al84Ni10Ce6 alloys with amorphous surface layer prepared by high-pressure die casting10.2320/matertrans1989.35.808 ↗
21. Improvement in dielectric tunability of Ba 0.6 Sr 0.4 TiO 4 -Mg 2 TiO 4 composite ceramics via heterogeneous nucleation processing10.1088/0256-307X/26/11/117701 ↗
22. Enhance the thermal stability and glass forming ability of Al-based metallic glass by Ca minor-alloying10.1016/j.intermet.2012.04.009 ↗
23. Ultrahigh tensile strengths of Al88Y2Ni9M1 (M=Mn or Fe) amorphous alloys containing finely dispersed fcc-Al particles10.2320/matertrans1989.31.747 ↗
24. Ultrahigh mechanical strengths of Al88Y2Ni10−xMx (M=Mn, Fe or Co) amorphous alloys containing nanoscale fcc-Al particles10.2320/matertrans1989.32.599 ↗
25. Elevated-temperature strength of an Al88Ni9Ce2Fe1 amorphous alloy containing nanoscale fcc-Al particles10.2320/matertrans1989.33.669 ↗
26. Solute partitioning in partially crystallized Al-Ni-Ce(-Cu) metallic glasses10.1016/S0956-716X(99)80035-1 ↗
27. Observation of linear defects in Al particles below 7 nm in size10.1557/jmr.2006.0189 ↗
28. Spray formed Al-based amorphous matrix nanocomposite plate10.1016/j.jallcom.2011.02.125 ↗
29. Mechanical properties of an Al88.5Ni8Mm3.5 (Mm: Misch Metal) alloy produced by extrusion of atomized amorphous plus fcc-Al phase powders10.2320/matertrans1989.33.775 ↗
30. Positive exponent superplasticity in advanced aluminum alloys with nano or near-nano scale grained structures10.1016/0921-5093(93)90315-6 ↗
31. Readily superplastic forging at high strain rates in an aluminium-based alloy produced from nanocrystalline powders10.1007/BF00354013 ↗
32. Mechanical properties of rapidly solidified aluminium alloys extruded from amorphous or nanocrystalline powders10.1080/09500839308240933 ↗
33. Hashikura M · 2000 · 1092
34. High elevated-temperature strength of Al-based nanoquasicrystalline alloys10.1016/S0965-9773(99)00035-5 ↗
35. Microstructure, fabrication and properties of quasicrystalline Al–Cu–Fe alloys: a review10.1016/S0925-8388(03)00445-6 ↗
36. Effect of additional M elements on bcc-Fe precipitation in Fe-Si-B-M (M=Nb, Zr or V) amorphous alloys
37. High-strength Al-based alloys consisting mainly of nanoscale quasicrystalline or amorphous particles10.4028/www.scientific.net/MSF.235-238.873 ↗
38. Microstructure of Rapidly Solidified High Strength Al94V4Fe2 Alloy10.2320/matertrans.44.1993 ↗
39. Al-Fe-based bulk quasicrystalline alloys with high elevated temperature strength10.1557/JMR.2000.0392 ↗
40. Microstructure and mechanical properties of rapidly solidified Al-Cr-Ce-M (M=transition metal) alloys containing high volume fraction of the icosahedral phase10.2320/matertrans1989.36.6 ↗
41. High-strength aluminum- and zirconium-based alloys containing nanoquasicrystalline particles10.1016/S0921-5093(00)01307-1 ↗
42. Bulk amorphous, nano-crystalline and nano-quasicrystalline alloys. IV. developments of aluminum- and magnesium-based nanophase high-strength alloys by use of melt quenching-induced metastable phase10.2320/matertrans.43.2006 ↗
43. Microstructure and mechanical properties of P/M P/M Al-V-Fe and Al-Fe-M-Ti (M = V, Cr, Mn) alloys containing dispersed quasicrystalline particles10.2320/matertrans1989.41.1550 ↗
44. Fabrication of aluminum coating with dispersed nanoscale quasicrystalline particles by cold spray10.2320/jinstmet.73.421 ↗
45. Stable and metastable quasicrystals in Al-based alloy systems with transition metals10.1016/j.jallcom.2003.08.012 ↗
46. Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al-based metal matrix composites10.1016/j.jallcom.2011.12.022 ↗
47. Structural themes in approximant and decagonal quasicrystalline phases in Al based alloys10.1016/j.jallcom.2009.10.063 ↗
48. Effect of Mo on stability of quasicrystalline phase in Al-Mn-Fe alloy10.1016/j.jallcom.2012.12.013 ↗
49. Cu-based metallic glass particle additions to significantly improve overall compressive properties of an Al alloy10.1016/j.compositesa.2010.07.004 ↗
50. Fabrication of Fe-based metallic glass particle reinforced Al-based composite materials by friction stir processing10.2320/matertrans.M2011094 ↗
51. Strong and light metal matrix composites with metallic glass particulate reinforcement10.1016/j.msea.2011.10.098 ↗
52. Nano-metals I. Nanostructures and mechanical properties of bulk Al-Fe alloys prepared by electron-beam deposition10.2320/matertrans.42.1561 ↗
53. Nanocrystalline structure and mechanical properties of vapor quenched Al-Zr-Fe alloy sheets prepared by electron-beam deposition10.2320/matertrans.44.1948 ↗
54. Nanostructured Al-Fe alloys produced by e-beam deposition: static and dynamic tensile properties10.1016/S1359-6454(03)00237-4 ↗
55. EXAFS and SAXS analysis for nano-structural origin of high strength for supersaturated Al100−xFex (x = 1, 2.5) alloys10.1016/j.msea.2003.10.166 ↗
56. Nitrogen-induced amorphization in Al80Ti20 films prepared by reactive sputtering10.1016/0167-577X(93)90159-U ↗
57. Production and properties of functionally gradient films varying from amorphous Al(Ti, N) to hexagonal Al(Ti)N phase10.2320/matertrans1989.34.548 ↗
58. Functionally graded Al Zr-based amorphous alloys10.1016/0921-5093(94)90851-6 ↗
59. Development of high-strength, heat-resistant aluminum alloy made by powder forging process