Influence of the Incorporation of Electroplating Sludge from the Industrial pole of Manaus on the Technological Properties of Red Ceramics
Source abstract
Abstract
This study evaluates the incorporation of electroplating sludge waste into red ceramics as a sustainable and safe alternative for waste management. The raw materials were collected and characterized, and a 23 factorial design was applied with sludge contents of 0%, 10%, and 20%, firing temperatures of 850, 950, and 1050 °C, and residence times of 60, 120, and 180 minutes. Ceramic specimens were formed by hydraulic pressing and tested for flexural strength, water absorption, linear shrinkage, and heavy metal leaching. Although sludge incorporation slightly reduced mechanical performance and increased water absorption and shrinkage, all results remained within regulatory limits. Importantly, leaching tests demonstrated a significant reduction in the mobility of Cr and Ni, indicating the effective immobilization of these hazardous elements. These findings underscore the potential of electroplating sludge as a raw material in red ceramics, serving both as a recycling route and a strategy for environmental risk mitigation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Pigment Synthesis and Properties · Metal Extraction and Bioleaching
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal do Amazonas, Brasil
Universidade Federal do Rio Grande do Norte, Brasil
Universidade Federal do Amazonas, Brasil; Universidade Federal do Amazonas, Brasil
References (37)
Show source-provided references
1. 2023
2. Incorporation of electroplating sludge in red ceramic: an alternative for waste reuse
3. Preparation of environmentally friendly ceramics using hazardous industrial waste: heavy metal immobilization and feasibility assessment
4. Sintering behavior and heavy metal fixation of ceramics made with electroplating sludge
5. Study of mineralogical and thermal transformation of clay mixtures containing red clay and kaolin
6. Influence of kaolin and red clay on ceramic specimen properties when galvanic sludge is incorporated to encapsulate heavy metals
7. Immobilization of heavy metals in ceramic bricks using electroplating waste: performance and environmental safety
8. Sustainable ceramic production with metal-containing wastes: mineralogical evolution and mechanical performance
9. 2016
10. 2017
11. 2023
12. Santos PS · 1989
13. 1987
14. 2004
15. Adsorption of heavy metal ions on mesoporous silica-modified montmorillonite containing a grafted chelate ligand10.1016/j.clay.2012.02.012 ↗
16. Encapsulation in ceramic material of the metals Cr, Ni, and Cu contained in galvanic sludge via the solidification/stabilization method10.1016/j.jece.2017.07.044 ↗
17. Potentiality of clay raw materials from Gram area (Northern Tunisia) in the ceramic industry10.1016/j.clay.2015.03.027 ↗
18. Characterization of ceramic masses from São Paulo State for the production of lightweight aggregates for concrete
19. Technological characterization and industrial application of two Turkish clays for the ceramic industry10.1016/j.clay.2010.08.005 ↗
20. Determination of kinetic parameters of the sintering of single-fired BIIa-type ceramic tiles
21. Characterization and reuse of electroplating sludge in construction materials
22. Evaluation of hazardous waste from electroplating processes and its potential use in building materials
23. Mineralogical composition of electroplating sludge: implications for reuse and environmental safety
24. Evaluation of kaolinitic clays from Campos dos Goytacazes used for the production of red ceramics
25. Technological properties of a self-bloating clay and expanded-clay aggregate for the production of lightweight concrete10.1590/0366-69132023693893308 ↗
26. Pereira OS · 2011 · 1695
27. Use of galvanic sludge as raw material in red ceramics and characterization of the obtained ceramic bodies regarding technological properties and metal immobilization
28. Electrochemical copper recovery from galvanic sludge10.1016/j.hydromet.2016.06.028 ↗
29. Ceramic raw materials from the State of Maranhão, Brazil: part 1 – chemical and mineralogical characterization and technological properties of clays from São Luis, Rosário, Pinheiro and Mirinzal10.1590/S0370-44672012000400012 ↗
30. Thermal behavior and phase evolution of kaolinitic clays for ceramic applications
31. Physical and chemical characterisation of metal finishing industrial wastes10.1016/j.jenvman.2004.09.011 ↗
32. Sludges from the metal surface treatment industry as additives to ceramic matrices
33. 2009
34. 2009
35. 2024
36. 1992
37. 2002