Effect of carbon dioxide and temperature on passive film parametersof superduplex stainless steel
Source abstract
Abstract
Superduplex stainless steel has been frequently employed in new sites of Brazilian Pre-Salt. In these environments, chloride concentration, temperature and carbon dioxide are normally present in higher levels than those at sea water at room temperature. In these conditions, it is expected that the passive films of stainless steel also show modifications. To better understand such modifications, samples of superduplex stainless steel UNS S32750 were submitted to electrochemical impedance measurements in brine media, at two temperatures and under presence/absence of carbon dioxide. The electrochemical impedance results were initially tested using the Kramers-Kronig transform and subsequently fitted by equivalent circuit employing constant phase elements - CPE. Moreover, to quantify the effect of each factor (temperature, chloride, carbon dioxide and microstructure) on the equivalent circuit, their parameters were tested applying statistical analysis. Significant effect of carbon dioxide and temperature was found on related parameters of passive film for heat-treated samples.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Rio de Janeiro State University, Brazil
Université de Savoie, France
References (16)
Show source-provided references
1. Factorial design applied to corrosion of superduplex stainless steel
2. Effect of microstructure on corrosion behavior of superduplex stainless steel at critical environment condition10.1016/j.scriptamat.2007.07.037 ↗
3. Pit growth and stifling on carbon steel in CO2-containing media in the presence of HAc10.1016/j.electacta.2009.07.061 ↗
4. An electrochemical model for prediction of corrosion of mild steel in aqueous carbon dioxide solutions10.5006/1.3293640 ↗
5. Nyborg R · 2002
6. The effect of acetic acid on the pit propagation in CO2 corrosion of carbon steel10.1016/j.elecom.2007.11.028 ↗
7. Magnabosco R
8. Characterization of microstructure, chemical composition, corrosion resistance and toughness of a multipass weld joint of superduplex stainless steel UNS S3275010.1016/j.matchar.2006.07.006 ↗
9. Orazem ME · 2008 · 427
10. Orazem ME · 2008 · 109
11. The electrochemical behaviour of 2205 duplex stainless steel in alkaline solutions with different pH in the presence of chloride10.1016/j.electacta.2012.01.025 ↗
12. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
13. The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride10.1016/j.corsci.2010.11.010 ↗
14. On the intrinsic coupling between constant-phase element parameters α and Q in electrochemical impedance spectroscopy10.1016/j.electacta.2012.04.020 ↗
15. Practical application of the Kramers-Kronig transformation on impedance measurements in solid state electrochemistry10.1016/0167-2738(93)90261-Z ↗
16. Solution chemistry of Mo(III) and Mo(IV): Thermodynamic foundation for modeling localized corrosion10.1016/j.corsci.2010.01.032 ↗