Chloride diffusivity in red mud-ordinary portland cement concrete determined by migration tests
Source abstract
Abstract
Red mud, which is a solid waste produced in the alumina production process, is classified as dangerous due to its high pH. In this work, the concentration of chlorides was monitored by measuring the conductivity of the anolyte, which initially was distilled water. The steady and nonsteady-state chloride diffusion coefficients were estimated from the "time lag" and "equivalent time" between diffusion and migration experiments. The capillary water absorption, apparent porosity and pore size distribution of concretes were also analyzed. The addition of red mud apparently ensured lower chloride diffusion in the tested mixtures due to its superfine particle-size distribution and its "filler" effect. Red mud lengthened the service life of the concrete to 35 years (double that of the reference concrete). This finding is very positive since it indicates a delay in the onset of the rebar corrosion process caused by the migration of chloride ions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bauxite Residue and Utilization · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Federal University of São Carlos, Brazil
University of Aveiro & CICECO, Portugal
References (22)
Show source-provided references
1. 2009
2. 2009
3. Utilization of red mud as a stabilization material for the preparation of clay liners10.1016/j.enggeo.2006.07.002 ↗
4. Fundamental aspects of cement solidification and stabilization10.1016/S0304-3894(96)01805-5 ↗
5. Preparation of iron rich cements using red mud10.1016/S0008-8846(97)00101-4 ↗
6. Red mud addition in the raw meal for the production of Portland cement clinker10.1016/j.jhazmat.2004.08.002 ↗
7. Preparation of special cements from red mud10.1016/S0956-053X(97)00004-4 ↗
8. Red mud as a corrosion inhibitor for reinforced concrete
9. Santos L. · 2006
10. Freire KRR · 2005
11. Chloride diffusivity based on migration testing10.1016/S0008-8846(01)00525-7 ↗
12. Surface treatment of reinforced concrete in marine environment: Influence on chloride diffusion coefficient and capillary water absorption10.1016/j.conbuildmat.2008.06.013 ↗
13. Helene PRL · 1999
14. Calculation of diffusion coefficients in concrete from ionic migration measurements10.1016/0008-8846(93)90023-3 ↗
15. Measurement of the steady and nonsteady-state chloride diffusion coefficients in a migration test by means of monitoring the conductivity in the anolyte chamber comparison with natural diffusion tests10.1016/S0008-8846(01)00562-2 ↗
16. Equivalent circuit model for SAC electrochemical impedance spectroscopy of concrete10.1016/S0008-8846(00)00400-2 ↗
17. The durability characteristics of High Performance Concrete: a review10.1016/S0958-9465(02)00081-1 ↗
18. Surface properties of red mud particles from potentiometric titration10.1016/S0927-7757(00)00814-1 ↗
19. Adsorbent properties of red mud and its use for wastewater treatment10.1016/S0043-1354(97)00326-6 ↗
20. Sequestration of carbon dioxide (CO2) using red mud10.1016/j.jhazmat.2009.11.146 ↗
21. Beneficial effect of fly ash on chloride diffusivity of hardened cement paste10.1016/S0008-8846(99)00047-2 ↗
22. Nilsson L · 2000