journal article·2025Open access

Active Metal Soldering and Characterization of Soldered Joints in Cu Base Plate to Aluminum-Graphite Composites

L. C. Tsao, Yao-Ching Fang, Ming-Wei Wu

Materials Research· Volume 28

Abstract

Heat dissipation materials with high thermal conductivity (TC) can meet the high demand for improving heat dissipation in high-power IGBT modules. The current study focused on soldering Al-graphite composites (Al-Gr) with a copper (Cu) base plate using an active type Sn-Ag-Ti (SAT) solder. Ultrasonic active soldering (UAS) was performed in air at 250 °C for 30 sec. The relative spreadability rates of the direct UAS process versus conventional soldering were + 276.6% for SAT/Cu and +186.1% for SAT/Al-Gr. After direct UAS, a Cu6Sn5 layer formed at the active solder/Cu interface and Al dissolved into the active solder zone, thus forming a ternary coarse Al-Ag-Sn solid solution in the active solder region. In addition, submicron particles (e.g., Al-Ag-Sn and Ag3Sn) adsorbed on the surface of active solder/Gr interface. The calculated Gibbs free energy results indicated that both solute Ti and Ti-Sn compounds could react with C to form TiC compounds, and TiC reacted with Ti-Sn compounds to form the Ti2SnC phase, which was accelerated with the direct UAS process. The shear strengths were measured to be 31.0 ± 4.1MPa for Cu/SAT/Cu joints, 14.3 ± 3.2 MPa for Al-Gr/SAT/Cu joints, and 12.8 ± 3.8 MPa for Al-Gr/SAT/Al-Gr joints, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Pingtung University of Science & Technology, Taiwan

National Taipei University of Technology, Taiwan

Funding

National Science and Technology Council

References (44)

Show source-provided references
1. Thermal Management on IGBT Power Electronic Devices and Modules10.1109/ACCESS.2018.2793300 ↗
2. Tong HM · 2013
3. Electromigration-a brief survey and some recent results10.1109/T-ED.1969.16754 ↗
4. Frear D · 2017
5. Thermal performance analysis of aluminum, copper, and graphene nanoplatelets-doped nanocomposite heat sinks manufactured via stereolithography10.1016/j.applthermaleng.2023.120315 ↗
6. Principle design and data of graphite components10.1016/j.nucengdes.2004.08.012 ↗
7. Effect of ceramic reinforcement on the properties of metal matrix nanocomposites
8. Automotive power module packaging: current status and future trends
9. Soldering porous ceramics through ultrasonic-induced capillary action and cavitation10.1016/j.ceramint.2019.01.171 ↗
10. Joining of SiO2 glass and substrate using In49Sn active solder in air
11. Fluxless Direct Soldering of Transparent Conductive Oxides (TCOs) to Copper, Advances in Materials Science and Engineering
12. Research of joining brittle nonmetallic materials with an active solder
13. Microstructural characterization and mechanical properties of microplasma oxidized TiO2/Ti joints soldered using Sn3.5Ag4Ti(Ce) active solder10.1007/s10854-013-1577-4 ↗
14. Direct active soldering of Al0.3CrFe1.5MnNi0.5 high entropy alloy to 6061-Al using Sn-Ag-Ti active solder10.1016/S1003-6326(18)64707-7 ↗
15. Fast low-temperature ultrasonically soldering porous Si3N4 ceramics in the air10.1016/j.ceramint.2021.11.111 ↗
16. Spreading of Sn-Ag-Ti and Sn-Ag-Ti(-Al) solder droplets on the surface of porous graphite through ultrasonic vibration10.1016/j.matdes.2018.04.028 ↗
17. Application of plasma sprayed Cu intermediate layers in the soldering process of graphite composite to 6060 aluminum alloy10.3390/ma13225114 ↗
18. A novel metallization process for soldering graphite to copper at low temperature10.1016/j.jallcom.2016.12.104 ↗
19. Active soldering of aluminum - graphite composite to aluminum using Sn3.5Ag4Ti0.5Cu active filler10.3139/146.111407 ↗
20. Aluminum carbide formation in Al-graphite composites: in situ study and effects of processing variables and sintering method
21. Sn-Ti (Tin-Titanium)10.1007/s11669-010-9663-2 ↗
22. Oxidation behavior of Copper at a temperature below 300 °C and the methodology for passivation10.1590/1980-5373-MR-2015-0139 ↗
23. The Cu-Sn (copper-tin) system10.1007/BF03029299 ↗
24. Investigation on growth of the orientation-preferred Cu6Sn5 on (001)Cu during the temperature-increased multiple reflow process10.1016/j.jallcom.2021.161205 ↗
25. Structure and properties of Sn-Cu lead-free solders in electronics packaging10.1080/14686996.2019.1591168 ↗
26. Thermal conductivity and mechanical properties of flake graphite/Al composite with a SiC nano-layer on graphite surface10.1016/j.matdes.2016.06.122 ↗
27. Interfacial structure and growth kinetics of intermetallic compounds between Sn-3.5Ag solder and Al substrate during solder process10.1016/j.jallcom.2016.04.263 ↗
28. Comparative Study of Sn-based Solder Wettability on Aluminum Substrate10.2207/qjjws.41.26a ↗
29. The Al-Sn (Aluminum-Tin) system10.1007/BF02868095 ↗
30. Ultrasonic soldering aluminum at low temperature
31. Interfacial structure and fracture behavior of 6061 Al and MAO-6061 Al direct active soldered with Sn-Ag-Ti active solder10.1016/j.matdes.2013.11.021 ↗
32. Kattner U. · 2007
33. Nucleation and growth of Ag3Sn in Sn-Ag and Sn-Ag-Cu solder alloys
34. Interface reaction in ultrasonic vibration-assisted brazing of aluminum to graphite using Sn-Ag-Ti solder foil10.1016/j.jmatprotec.2015.02.028 ↗
35. Simulation and experimental studies on microstructure evolution of resolidified dendritic TiCx in laser direct deposited Ti-TiC composite10.1016/j.matdes.2018.08.053 ↗
36. Interface reaction in ultrasonic vibration-assisted brazing of aluminum to graphite using Sn-Ag-Ti solder foil10.1016/j.jmatprotec.2015.02.028 ↗
37. Synthesis of Ti2SnC under Optimized Experimental Parameters of Pressureless Spark Plasma Sintering Assisted by Al Addition
38. Synthesis of Ti2SnC from Ti/Sn/TiC powder mixtures by pressureless sintering technique10.1016/j.matlet.2006.03.045 ↗
39. Reaction mechanism for synthesis of Ti2SnC10.1016/j.materresbull.2007.02.006 ↗
40. Effects of different Sn contents on formation of Ti2SnC by self-propagating high-temperature synthesis method in Ti-Sn-C and Ti-Sn-C-TiC systems10.2478/s13536-014-0252-7 ↗
41. Bimodal microstructure and reaction mechanism of ti2snc synthesized by a high-temperature reaction using Ti/Sn/C and Ti/Sn/TiC powder compacts10.1111/j.1551-2916.2006.01275.x ↗
42. Effects of TiC addition on formation of Ti2SnC by self-propagating combustion of Ti-Sn-C-TiC powder compacts10.1016/j.jallcom.2010.04.196 ↗
43. Chemical interaction between carbon and titanium dissolved in liquid tin: crystal structure and reactivity of Ti2SnC with Al10.1016/S0921-5093(98)00840-5 ↗
44. A Revised Thermodynamic description of the Ti-C system10.1016/j.calphad.2004.01.004 ↗