journal article·2019Open access

Austenitic Grain Size Prediction in Hot Forging of a 20MnCr5 Steel by Numerical Simulation Using the JMAK Model for Industrial Applications

Thiago Marques Ivaniski, Jérémy Epp, Hans-Werner Zoch, Alexandre da Silva Rocha

Materials Research· Volume 22· Issue 5

Abstract

Yield strength and toughness in steels are directly associated with hot forging processes, especially by controlling austenitic grain size and cooling conditions. The phenomenological JMAK model in macroscale has been applied in different material classes to predict grain size after hot forming. However, on an industrial application, there is still a lack of understanding concerning the synergic effects of strain rate and temperature on recrystallization. This preliminary study aimed at investigating the applicability of coupled semi-empirical JMAK and visco-elastoplastic models in numerical simulation to predict austenitic grain size (PAGS). Hot forging of cylindrical samples of a ferritic-perlitic DIN 20MnCr5 steel was performed followed by water quenching. The main influences, such as temperature, strain and strain rate fields following the recrystallization model were investigated using the subroutine of FORGE NxT 2.1 software. The results were evaluated by comparing experimentally measured and simulated PAGS at process end. The forging process generates different strain and strain rate fields in the workpiece, which in turn lead to a variation in the PAGS and recrystallization fractions. The simulation was able to detect the PAGS variation showing a good agreement between the experimental forging results and the applied model.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Rio Grande do Sul, Brasil

Leibniz-Institut für Werkstofforientierte Technologien, Germany

References (20)

Show source-provided references
1. Prediction of steel flow stresses under hot working conditions”10.1590/S1516-14392005000300015 ↗
2. Effect of Austenite Grain Size on Transformation Behavior, Microstructure and Mechanical Properties of 0.1C-5Mn Martensitic Steel10.2355/isijinternational.53.2218 ↗
3. Recrystallization and grain growth in hot rolling10.1179/msc.1979.13.3-4.187 ↗
4. Effect of competing hardening and softening mechanisms on the flow stress curve modelling of ultra-low carbon steel at high temperatures10.1016/S0924-0136(03)00620-4 ↗
5. Dynamic and Static Recrystallization Behavior of Low Carbon High Niobium Microalloyed Steel10.1016/S1006-706X(11)60011-3 ↗
6. Prediction of the critical conditions for initiation of dynamic recrystallization10.1016/j.matdes.2009.09.038 ↗
7. Approaches to Modeling of Recrystallization10.3390/met1010016 ↗
8. Applicability of JMAK-type model for predicting microstructural evolution in nickel-based superalloys10.1016/j.proeng.2017.10.1067 ↗
9. On the applicability of JMAK-type models in predicting IN718 microstructural evolution10.7494/cmms.2017.1.0576 ↗
10. Simulation of the material softening during hot metal forming10.1515/amm-2015-0322 ↗
11. Numerical Simulation of Hot Closed Die Forging of a Low Carbon Steel Coupled with Microstructure Evolution 210.1590/1516-1439.273114 ↗
12. Determination of JMAK dynamic recrystallization parameters through FEM optimization techniques10.1016/j.commatsci.2017.10.007 ↗
13. Experimental and numerical study on the temperature sensitivity of the dynamic recrystallization activation energy and strain rate exponent in the JMAK model10.1016/j.jmrt.2018.11.007 ↗
14. 2018
15. Dynamic recrystallization in nickel and nickel-iron alloys during high-temperature deformation10.1016/0001-6160(69)90049-2 ↗
16. Overview no. 35 Dynamic recrystallization: mechanical and microstructural considerations10.1016/0001-6160(84)90049-X ↗
17. Metadynamic recrystallization of Nb-V micro-alloyed steel during hot deformation10.1557/jmr.2016.486 ↗
18. Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process10.1016/j.commatsci.2008.03.010 ↗
19. A Mathematical Hot Rolled C-Mn Model to Predict and Microalloyed the Mechanical Properties of Steels10.2355/isijinternational.32.1329 ↗
20. Hot Deformation and Dynamic Recrystallization of 17-4 PH Stainless Steel10.2355/isijinternational.53.680 ↗