Influence of calcium carbonate and slip agent addition on linear medium density polyethylene processed by rotational molding
Source abstract
Abstract
In this paper, the influence of calcium carbonate and slip agent on linear medium density polyethylene (LMDPE) processed by rotational molding was evaluated. LMDPE was dry blended with different CaCO3 masterbatch ratios, erucamide slip agent and then extruded, micronized and rotomolded. The powder samples were characterized using MFI (Melting flow index), dry flow and bulk density. The characterization of rotomolded samples properties was performed by DSC (Differential scanning calorimetry), microscopy analysis, izod impact and tensile test. The results pointed out that the CaCO3 addition modifies the bulk density compared to neat LMDPE, but did not significantly affect the dry flow and MFI. The erucamide addition decreased the dry flow and increased the bulk densities. The porosity degree data showed that CaCO3 addition in the LMDPE increased the quantity of pores. The DSC results showed no significant difference in the crystallinity degree. The behavior of porosity led to a decrease in the mechanical properties of LMDPE with the CaCO3 addition.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Foaming and Composites · Polymer crystallization and properties · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Educacional Society of Santa Catarina, Brazil
State University of Santa Catarina, Brazil
References (38)
Show source-provided references
1. Effect of pigmentation on the microstructure and properties of rotationally molded polyethylene10.1023/A:1004485825823 ↗
2. Effect of enhancing fins on the heating/cooling efficiency of rotational molding and the molded product qualities10.1016/j.polymertesting.2007.10.004 ↗
3. The Effect of Processing Variables on the Formation and Removal of Bubbles in Rotationally Molded Products10.1002/pen.10487 ↗
4. Particulate reinforced rotationally moulded polyethylene composites: mixing methods and mechanical properties10.1016/j.compscitech.2005.12.022 ↗
5. An experimental study and model assessment of polymer sintering10.1002/pen.10617 ↗
6. Thermal transfer simulation regarding the rotational moulding of polyamide 1110.1007/s10973-012-2806-4 ↗
7. Global Efficiency of Innovative Rotational Mold Directly Heated by Thermal Fluid10.1002/pen.23139 ↗
8. 3D Model for Powder Compact Densification in Rotational Molding10.1002/pen.23133 ↗
9. Final product testing of rotational moulded natural fibre-reinforced polyethylene10.1016/j.polymertesting.2006.03.010 ↗
10. Characterization of New Formulations for the Rotational Molding Based on Ethylene: Propylene Copolymer/Graphite Nanocomposites10.1002/pen.21012 ↗
11. Harkin-Jones E · 2005
12. Rotational Molding of Polyethylene Composites Based on Agave Fibers10.1002/pen.23168 ↗
13. Anionic Nylon 6/TiO2 Composite Materials: Effects of TiO2 Filler on the Thermal and Mechanical Behavior of the Composites10.1002/pc.22292 ↗
14. Yan WJ · 2006
15. Effects of coupling agents on mechanical and morphological behavior of the PP/HDPE blend with two different CaCO310.1016/S0014-3057(02)00120-9 ↗
16. Toughening of isotatic polypropylene with CaCO3 particles10.1016/S0032-3861(02)00193-3 ↗
17. Melt rheology and extrudade swell of calcium carbonate nanoparticle-filled isotatic polypropylene10.1016/j.polymertesting.2004.08.006 ↗
18. Effects of slip agent and talc surface-tratment on the scratch behavior of thermoplastic olefins10.1002/pen.20507 ↗
19. Fickian diffusion of erucamide (13-cis-docosenamide) in poly(laurolactam) (Nylon 12) (PA-12)10.1002/(SICI)1521-3935(20000201)201:3<375::AID-MACP375>3.0.CO;2-1 ↗
20. Chaudhary BI
21. Novel Processing Additives for Rotational Molding of Polyethylene10.3139/217.2296 ↗
22. 2012
23. 2006
24. Crawford RJ · 2002
25. 2010
26. Spherulitic banding in metallocene catalysed polyethylene spherulites10.1016/S0032-3861(00)00637-6 ↗
27. 2012
28. 2000
29. Solubility of erucamide (13-cisdocosenamide) in isotactic poly(propylene) and thermal behaviour of their blends10.1016/S0032-3861(97)0058X-4 ↗
30. Comparison of the mechanical properties and interfacial interactions between talc, kaoli, and calcium carbonate filled polypropylene composites10.1002/app.13542 ↗
31. Mechanical and thermal properties of talc and calcium carbonate filled polypropylene hybrid composites10.1002/app.13543 ↗
32. Galera VAV
33. Narkis M · 1995
34. A comparison of degree of properties enhancement produced by thermal annealing between polyethylene and calcium carbonate: polyethylene composites10.1016/S0142-9418(98)00099-3 ↗
35. Atomic Force Microscopy Analysis of Morphology of Low Density Polyethylene Influenced by Al Nano- and Microparticles10.1002/app.27357 ↗
36. Vlachopoulos J · 2005
37. Bubble removal in rotational molding10.1002/pen.20035 ↗
38. Pick LT · 2004 · 259