journal article·2011-08-26Open access

Ultrasonic inspection of AA6013 laser welded joints

Adriano Passini, Aline Capella de Oliveira, Rudimar Riva, Dilermando Nagle Travessa, Kátia Regina Cardoso

Materials Research· Volume 14· Issue 3

Abstract

Interest in laser beam welding for aerospace applications is continuously growing, mainly for aluminum alloys. The joints quality is usually assessed by non-destructive inspection (NDI). In this work, bead on plate laser welds on 1.6 mm thick AA6013 alloy sheets, using a 2 kW Yb-fiber laser were obtained and inspected by pulse/echo ultrasonic phased-array technique. Good and poor quality welds were inspected in order to verify the limits of inspection, comparing also to X-ray radiography and metallographic inspections. The results showed that ultrasonic phased array technique was able to identify the presence of grouped porosity, through the attenuation of the amplitude of the echo signal. This attenuation is attributed to the scattering of the waves caused by micro pores, with individual size below the resolution limit of the equipment, but when grouped, can cause a perceptive effect on the reflection spectra.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Empresa Brasileira de Aeronáutica S.A., Brazil

Instituto de Estudos Avançados, Brazil

Universidade Federal de São Paulo, Brazil

References (17)

Show source-provided references
1. Nd:YAG laser butt welding of AA6013 using silicon and magnesium containing filler powders10.1016/j.msea.2006.04.033 ↗
2. Pacchione M · 2006 · 451.1
3. Lenczowski B. · 2002 · 4101.1 4101.4
4. NDT of welds: state of the art10.1016/0963-8695(96)00010-2 ↗
5. Defect characterization in Al welded joints by non-contact Lamb wave technique10.1016/j.jmatprotec.2006.02.024 ↗
6. Non-contact ultrasonic techniques10.1016/j.ultras.2004.01.101 ↗
7. Application of ultrasonic wave propagation imaging method to automatic damage visualization of nuclear power plant pipeline10.1016/j.nucengdes.2010.06.011 ↗
8. Fatigue crack detection in metallic structures with Lamb waves and 3D laser vibrometry10.1088/0957-0233/18/3/024 ↗
9. A comparative evaluation of ultrasonic testing of AISI 316L welds made by shielded metal arc welding and gas tungsten arc welding processes10.1016/j.jmatprotec.2010.02.013 ↗
10. Study on nondestructive inspection using HTS-SQUID for friction stir welding between dissimilar metals10.1016/j.physc.2007.01.072 ↗
11. A magnetic flux leakage method using a magneto resistive sensor for non destructive evaluation of spot welds10.1016/j.ndteint.2010.09.012 ↗
12. Artificial neural networks for quality control by ultrasonic testing in resistance spot welding10.1016/j.jmatprotec.2006.10.011 ↗
13. Ultrasonic nondestructive evaluation of spot welds for zinc-coated high strength steel sheet based on wavelet packet analysis10.1016/j.jmatprotec.2008.05.030 ↗
14. Characterization of welding defects by fractal analysis of ultrasonic signals10.1016/j.chaos.2007.01.012 ↗
15. 2001
16. Göbel G · 2007
17. The study on defects in aluminum 2219-T6 thick butt friction stir welds with the application of multiple non-destructive testing methods10.1016/j.matdes.2010.11.054 ↗