journal article·2026Open access

Synthesis and Evaluation of Mechanical Properties of Nano TiO2 Reinforced Aluminium Metal Matrix Nano Composites (MMNCs)

Abuthakir Jainulabdeen, Natarajan Chinnasamy, Thirumalai Ramanathan

Materials Research· Volume 29

Abstract

In the present investigation, aluminium Metal Matrix Composites (MMCs) were synthesized by reinforcing nano TiO2 particles at varying weight percentages (0.5 ,1.5,2.5 and 3.5 wt%) into an AA6061 molten aluminium matrix using the stir casting method. The synthesized composites were characterized using optical microscopic analysis, Scanning Electron Microscopy (SEM) and X- ray diffraction (XRD). The hardness and tensile properties of the composites were evaluated. The analysis of mechanical properties revealed that the T6 composite containing 0.5 wt% nano TiO2 particles had a maximum hardness of 79.6 BHN compared to other T6 samples and as well as ac-cast samples. Ultimate tensile strength and yield strength of T6 composite containing 0.5 wt% TiO2 was found to be (180 MPa and 135 MPa) higher than other T6 composites and as cast samples. Fractography of Al MMC containing 0.5 wt% nano TiO2 particles revealed ductile -brittle fracture mode in the T6 condition.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Scientific and Engineering Research Topics · Material Selection and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hindusthan Institute of Technology, India

References (21)

Show source-provided references
1. Influence of particle size and temperature on the wear properties of rutile-reinforced aluminum metal matrix composite10.1177/0021998314526079 ↗
2. Microstructural characteristics and wear properties of Si3N4/ZrO2 reinforced Al7055 alloy T6 heat treated metal matrix composites10.1007/s10751-024-02138-y ↗
3. Metal matrix reinforced by nano-particles: a review10.3390/met4010065 ↗
4. Development of TiB2 reinforced aluminum foundry alloy based in situ composites – Part II: enhancing the practical aluminum foundry alloys using the improved Al–5 wt%TiB2 master composite upon dilution10.1016/j.msea.2014.02.088 ↗
5. Characterizing and modeling mechanical properties of nanocomposites-review and evaluation
6. Experimental and numerical investigation of Al 6061 alloys reinforced with SiC-TiO2
7. Study the effects of titanium dioxide nanoparticles reinforcement on the mechanical properties of Aluminum Alloys composite
8. Mechanical characterization of ceramic nano B4C-Al2618 alloy composites synthesized by semi-solid state processing10.1080/0371750X.2018.1506363 ↗
9. Influence of two-stage stir casting process on mechanical characterization and wear behavior of AA2014-ZrO2 nano-composites10.1007/s12666-018-1441-6 ↗
10. Evaluation of mechanical strength of stir-casted AA7025 aluminium metal matrix composites reinforced with titanium carbide (TiC) particles using Taguchi optimization technique
11. Tribological properties of micro and nano SiC reinforced aluminium metal matrix composites
12. Mechanical and tribological behavior of the metal matrix composite AA6061/ZrO2/C10.1007/s12206-017-0917-3 ↗
13. Effect of various sizes of TiO2 nano-particulate composites on mechanical and tribological properties synthesized by bottom pouring stir casting method
14. Reddy BS · 2011
15. Fatigue fracture of friction-stir processed Al-Al3Ti-MgO hybrid nanocomposites10.1016/j.ijfatigue.2016.02.007 ↗
16. Influence of graphite and ZrO2 particle additions on the mechanical and wear behaviour of Al7075 aluminium alloy composites
17. Fabrication of 5052 Al/Al2O3 nano ceramic particle reinforced composite via friction stir processing route
18. Tensile behavior of aluminum alloy (AA7050) metal matrix composite reinforced with graphene fabricated by stir and squeeze cast processes
19. Synthesis and characterization of AA7050-TiO2 reinforced aluminum matrix composite10.1007/s12206-021-1010-5 ↗
20. Alumina-based nanocomposites consolidated by spark plasma sintering10.1016/S1359-6462(02)00191-4 ↗
21. Contribution of orowan strengthening effect in particulate-reinforced metal matrix nanocomposites10.1016/j.msea.2006.10.184 ↗