journal article·2016-12-12Open access

Chemo-Rheological Behavior of Aqueous Titanium Carbide Suspension and Evaluation of the Gelcasted Green Body Properties

Hamze Foratirad, Hamid Reza Baharvandi, Mohammad Ghanadi Maragheh

Materials Research· Volume 20· Issue 1

Abstract

Gel-casting is an advanced colloidal processing method for fabricating ceramic green parts. In this project acrylamide-based monomers were used as a gelcasting system. The effects of tetramethylammonium hydroxide and polyethylenimine dispersants on the premix solution containing titanium carbide powder have been studied via observation of the zeta potential and rheological behavior. The effect of various parameters on the gelation time and viscosity of solution and flexural strength and the shrinkage rate of titanium carbide green body were investigated. The results presented that the order of dispersion capacity of the tetramethylammonium hydroxide dispersant was better than the polyethylenimine dispersants. The results showed that the gelation time decreased and viscosity increased with increasing the monomer content, solid loading, initiator amount and temperature. The highest bending strength (39 MPa) was obtained for the samples containing 25 wt.% monomer content and 50% solid loading.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Injection Molding Process and Properties · Advanced materials and composites · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nuclear Science and Technology Research Institute, Iran

Malek-Ashtar University of Technology, Iran

References (28)

Show source-provided references
1. High-temperature oxidation of titanium carbide10.1007/BF00814045 ↗
2. Titanium carbide derived nanoporous carbon for energy-related applications10.1016/j.carbon.2006.04.035 ↗
3. Pressure sintering kinetics of tungsten and titanium carbides10.1016/j.ijrmhm.2013.03.001 ↗
4. Experimental characterization and mechanical behaviour modelling of molybdenum-titanium carbide composite for high temperature applications10.1016/j.ijrmhm.2008.09.018 ↗
5. Oxidation behavior of nano-scaled and micron-scaled TiC powders under air10.1016/j.ijrmhm.2013.07.012 ↗
6. Influence of TiC additions on the corrosion behaviour of WC-Co hardmetals in alkaline solution10.1016/j.ijrmhm.2014.05.009 ↗
7. Measurements of strain induced by chemical shrinkage in polymer composites10.1515/polyeng-2015-0224 ↗
8. Study on gelcasting of silicon nitride-bonded silicon carbide refractories10.1016/S0167-577X(02)00633-X ↗
9. Factors Influencing the Structure and Properties of Nanocomposites Derived by Sol-Gel Technique10.1515/POLYENG.2006.26.8-9.821 ↗
10. Gelcasting: a new ceramic forming process
11. Rheological and Calorimetric Characterization of an Epoxy System Cured in Presence of a Reactive Polyethersulphone10.1515/POLYENG.2000.20.3.159 ↗
12. Gelcasting of carbide ceramics10.2109/jcersj2.116.694 ↗
13. Gelcasting of carbide ceramics10.4028/www.scientific.net/KEM.403.163 ↗
14. Effects of dispersants on dispersibility of titanium carbide aqueous suspension10.1016/j.ijrmhm.2015.12.007 ↗
15. Infrared Spectroscopy of the TiO2/Aqueous Solution Interface10.1021/la980855d ↗
16. Aqueous Processing of Titanium Carbide Green Sheets10.1111/j.1151-2916.2001.tb01049.x ↗
17. Dispersion and rheological properties of concentrated silicon aqueous suspension10.1016/j.powtec.2005.10.005 ↗
18. Effect of surface modification on the rheological behavior of concentrated, aqueous SiC suspensions10.1016/S0167-577X(02)00550-5 ↗
19. Shear thinning and shear thickening of concentrated ceramic suspensions10.1016/S0927-7757(97)00133-7 ↗
20. Pattern formation during polymerization of acrylamide in the presence of sulfide hens10.1021/jp982968b ↗
21. Chemorheology of Aqueous-Based Alumina-Poly(vinyl alcohol) Gelcasting Suspensions10.1111/j.1151-2916.1999.tb01796.x ↗
22. Chemorheology of alumina-aqueous acrylamide gelcasting systems10.1016/S0955-2219(03)00322-4 ↗
23. Pethrick RA · 2007
24. Winter HH · 1997 · 165
25. Matyjaszewski K · 2002
26. Kriss M · 2015
27. Gelcasting preparation of porous silicon nitride ceramics by adjusting the content of monomers10.1007/s10971-009-2125-9 ↗
28. Effect of monomer content on physical properties of silicon nitride ceramic green body prepared by gelcasting10.1016/j.ceramint.2008.04.021 ↗