journal article·2013-05-10Open access

Influence of different acid etchings on the superficial characteristics of Ti sandblasted with Al2O3

Bruno Ramos Chrcanovic, Nathalia Lorrayne Costa Leão, Maximiliano Delany Martins

Materials Research· Volume 16· Issue 5

Abstract

Some implant manufactures use Al2O3 instead TiO2 powder to sandblast the machined dental implant, because Al2O3 powder is commercially more easily available and is cheaper than TiO2 powder. However, Al2O3 powder usually leaves aluminum oxide contamination on the surface, which is potentially toxic. In this work, we subjected Ti discs previously sandblasted with Al2O3 powder to 5 different acid etchings in order to verify which treatment is able to remove incorporated particles of Al2O3 from the surface. One group of samples were only sandblasted and served as control. The samples were analyzed by electron microscopy (SEM, EDS), scanning probe microscopy, and grazing incidence XRD. The control group showed presence of Al2O3 on the surface. Three acid etchings were efficient in removing the alumina from the tested samples. Almost all the tested samples showed higher roughness parameters values than the control samples. Titanium hydride was found in almost all test groups. Moreover, the results suggest that there is no incorporation of the whole Al2O3 particle into the titanium surface after the collision, conversely a particle fragmentation occurs and what remains on the titanium surface are Al2O3 residues.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Comissão Nacional de Energia Nuclear, Brazil

References (38)

Show source-provided references
1. Bone reactions to longstanding functional load at implants: An experimental study in dogs10.1111/j.1600-051X.2005.00747.x ↗
2. Dental implant design: Effect on bone remodeling10.1002/jbm.820250405 ↗
3. Osseointegration enhanced by chemical etching of the titanium surface: A torque removal study in the rabbit10.1034/j.1600-0501.1997.080601.x ↗
4. Interface shear strength of titanium implants with a sandblasted and acid-etched surface: a biomechanical study in the maxilla of miniature pigs10.1002/(SICI)1097-4636(199905)45:2<75::AID-JBM1>3.0.CO;2-P ↗
5. Biological properties of acid etched titanium implants: effect of sandblasting on bone anchorage10.1002/jbm.b.20003 ↗
6. Effect of surface micro-topography of titanium material on the behaviors of rabbit osteoblast in vitro10.1016/j.apsusc.2008.06.064 ↗
7. Anchorage of titanium implants with different surface characteristics: An experimental study in rabbits10.1111/j.1708-8208.2000.tb00002.x ↗
8. Bernard JP · 2002
9. Etched implants: A comparative surface analysis of 4 dental implant systems10.1002/jbm.b.20021 ↗
10. Effects of titanium surface topography on bone integration: a systematic review10.1111/j.1600-0501.2009.01775.x ↗
11. A human histologic analysis of Osseotite and machined surfaces using implants with 2 opposing surfaces
12. Rate of pull-out strength gain of dual-etched titanium implants: A comparative study in rabbits
13. Residual aluminum oxide on the surface of titanium implants has no effect on osseointegration10.1016/S0142-9612(03)00300-4 ↗
14. High concentration of residual aluminum oxide on titanium surface inhibits extracellular matrix mineralization10.1002/jbm.a.31810 ↗
15. Contamination of titanium castings by aluminum oxide blasting10.1016/0300-5712(94)00003-X ↗
16. Surface analysis of machined versus sandblasted and acid-etched titanium implants
17. The removal torque of titanium screw inserted in rabbit tibia treated by dual acid etching10.1016/S0142-9612(03)00218-7 ↗
18. Characterization and in vitro cytocompatibility of an acid-etched titanium surface10.1590/S0103-64402010000100001 ↗
19. Bone responses to titanium implants surface-roughened by sandblasted and double etched treatments in a rabbit model10.1016/j.tripleo.2008.03.017 ↗
20. Surface properties and biocompatibility of acid-etched titanium10.4012/dmj.27.415 ↗
21. Chemical and topographic analysis of treated surfaces of five different commercial dental titanium implants10.1590/S1516-14392012005000035 ↗
22. Quality criteria for pure titanium casting, laboratory soldering, intraoral welding, and a device to aid in making uncontaminated castings10.1016/0022-3913(91)90524-Z ↗
23. Salthouse JN · 1980
24. Effect of sandblasting conditions on alumina retention in representative dental alloys10.4012/dmj.2011-210 ↗
25. Effects of sandblasting media and steam cleaning on bond strength of titanium-porcelain10.4012/dmj.2009-119 ↗
26. Oral implant surfaces: Part 1 - Review focusing on topographic and chemical properties of different surfaces and in vivo responses to them
27. Enhanced bone apposition to a chemically modified SLA titanium surface10.1177/154405910408300704 ↗
28. Surface characterization of alkali- and heat-treated Ti with or without prior acid etching10.1016/j.apsusc.2011.12.119 ↗
29. Atomic force microscopy analysis of different surface treatments of Ti dental implant surfaces10.1016/j.apsusc.2004.04.007 ↗
30. Evaluation of a predictive model for implant surface topography effects on early osseointegration in the rat tibia model10.1067/mpr.2001.112415 ↗
31. Sandblasted and acid-etched dental implants: a histologic study in rats
32. Bone response to alteration of surface topography and surface composition of sandblasted and acid etched (SLA) implants10.1034/j.1600-0501.2002.130504.x ↗
33. Donachie Junior MJ · 2000 · 85
34. Hydrogen desorption from sandblasted and acid-etched titanium surfaces after glow-discharge treatment10.1002/1097-4636(200101)54:1<20::AID-JBM3>3.0.CO;2-Z ↗
35. Hydride formation on titanium surfaces by cathodic polarization10.1016/j.apsusc.2008.08.090 ↗
36. Titanium hydride and hydrogen concentration in acid-etched commercially pure titanium and titanium alloy implants: a comparative analysis of five implant systems10.1111/j.1600-0501.2010.01938.x ↗
37. Surface characterization of titanium based dental implants10.1590/S0103-97332006000600055 ↗
38. Growth of TiO2 anti-reflection layer on textured Si (100) wafer substrate by metal-organic chemical vapor deposition method10.1166/jnn.2011.4813 ↗