journal article·2015-11-03Open access

Modelling the Hot Flow Behaviors of AZ80 Alloy by BP-ANN and the Applications in Accuracy Improvement of Computations

Guo-Zheng Quan, Zhi-hua Zhang, Jia Pan, Yu-feng Xia

Materials Research· Volume 18· Issue 6

Abstract

Hot compressions of as-cast AZ80 magnesium alloy in a wide temperature range of 523-673 K and strain rate range of 0.01-10 s -1 with a height reduction of 60% were conducted by a Gleeble-1500 thermo-mechanical test simulator. The hot flow behaviors show highly non-linear intrinsic relationships with temperature, strain and strain rate. In order to model the complicated flow behaviors, error back-propagation algorithm, a representative method to minimize the target error, was selected to train the artificial neural network. A comparative study was made on the predictabilities of the improved Arrhenius-type and BP-ANN model by using two standard statistical parameters including correlation coefficient (R) and average absolute relative error (AARE). Comparison results show that the well-trained BP-ANN has higher prediction accuracy. Three highlight applications were presented. Firstly, the strain-stress data volume was expanded by BP-ANN predictions above experimental conditions. Secondly, the expanded data were applied in the simulations of isothermal compressions, and high simulation accuracy for the load-stroke curve was achieved. Thirdly, a three-dimensional (3D) interaction space of stress, strain, temperature and strain rate was constructed based on the intensive data, which supplies the stress data to arbitrary temperature, strain rate, and strain.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chongqing University, China

References (49)

Show source-provided references
1. Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ3110.1016/S1471-5317(01)00010-4 ↗
2. Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31B10.1016/j.commatsci.2007.04.024 ↗
3. Hot workability characteristics of magnesium alloy AZ80-A study using processing map10.1016/j.msea.2009.12.009 ↗
4. Dynamic recrystallization during high temperature deformation of magnesium10.1016/j.msea.2008.02.004 ↗
5. Room temperature formability of a magnesium AZ31 alloy: examining the role of texture on the deformation mechanisms10.1016/j.msea.2007.11.056 ↗
6. Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation10.1016/j.commatsci.2010.08.020 ↗
7. Prediction of thermo-mechanical behavior during hot upsetting using neural networks10.1016/j.msea.2007.03.037 ↗
8. Constitutive model for high temperature deformation of titanium alloys using internal state variables10.1016/j.mechmat.2009.10.004 ↗
9. A phenomenological constitutive model for high temperature flow stress prediction of Al-Cu-Mg alloy10.1016/j.msea.2011.12.023 ↗
10. Artificial neural network and constitutive equations to predict the hot deformation behavior of modified 2.25Cr-1Mo steel10.1016/j.matdes.2012.05.056 ↗
11. Strain compensation of the constitutive equation for high temperature flow stress of a Al-Cu-Li alloy10.1007/s11665-013-0747-0 ↗
12. A comparative study on Arrhenius-type constitutive model and artificial neural network model to predict high-temperature deformation behaviour in Aermet100 steel10.1016/j.msea.2011.03.017 ↗
13. Prediction of flow stress in a wide temperature range involving phase transformation for as-cast Ti-6Al-2Zr-1Mo-1V alloy by artificial neural network10.1016/j.matdes.2013.02.033 ↗
14. Prediction of constitutive behavior and microstructure evolution in hot deformation of TA15 titanium alloy10.1016/j.matdes.2013.03.103 ↗
15. Microstructural based models for bcc and fcc metals with temperature and strain rate dependency10.1016/j.mechmat.2004.02.003 ↗
16. Comparative study of constitutive modeling for Ti-6Al-4V alloy at low strain rates and elevated temperatures10.1016/j.matdes.2013.10.089 ↗
17. Constitutive modeling and microstructure change of Ti-6Al-4V during the hot tensile deformation10.1016/j.jallcom.2012.07.048 ↗
18. Modeling the hot working behavior of near-α titanium alloy IMI 83410.1016/j.pnsc.2013.11.004 ↗
19. Comparative study on constitutive relationship of as-cast Ti60 titanium alloy during hot deformation based on Arrhenius-type and artificial neural network models10.1016/j.matdes.2013.04.009 ↗
20. Constitutive analysis of wrought magnesium alloy Mg-Al4-Zn110.1016/j.scriptamat.2007.06.023 ↗
21. Prediction of 42CrMo steel flow stress at high temperature and strain rate10.1016/j.mechrescom.2007.10.002 ↗
22. The improved arrhenius model with variable parameters of flow behavior characterizing for the as-cast AZ80 magnesium alloy10.1590/S1516-14392013005000070 ↗
23. Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: Experiments and modeling over a wide range of strain-rates and temperatures10.1016/j.ijplas.2006.10.007 ↗
24. Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys10.1016/j.ijplas.2003.06.005 ↗
25. Constitutive model of Ti17 titanium alloy with lamellar-type initial microstructure during hot deformation based on orthogonal analysis10.1016/j.msea.2013.12.076 ↗
26. Prediction of temperature distribution and required energy in hot forging process by coupling neural networks and finite element analysis10.1016/j.matlet.2006.11.056 ↗
27. An artificial neural network approach to multiphase continua constitutive modeling10.1016/j.compositesb.2006.12.008 ↗
28. Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network10.1016/j.commatsci.2014.05.040 ↗
29. Artificial neural network modeling to predict the hot deformation behavior of an A356 aluminum alloy10.1016/j.matdes.2012.12.082 ↗
30. Artificial neural network modeling to evaluate and predict the deformation behavior of stainless steel type AISI 304L during hot torsion10.1016/j.asoc.2008.03.016 ↗
31. Application of neural networks in generating processing map for hot working10.1016/S0924-0136(03)00579-X ↗
32. Artificial neural network modeling of composition-process-property correlations in austenitic stainless steels10.1016/j.msea.2007.08.019 ↗
33. Inverse analysis of the stress-strain curve to determine the materials models of work hardening and dynamic recovery10.1016/j.msea.2015.03.115 ↗
34. Constitutive modeling for the dynamic recrystallization evolution of AZ80 magnesium alloy based on stress-strain data10.1016/j.msea.2011.07.064 ↗
35. Identification for the optimal working parameters of Al-Zn-Mg-Cu alloy with the processing maps based on DMM10.1007/s00170-011-3241-6 ↗
36. The new ductile fracture criterion for 30Cr2Ni4MoV ultra-super-critical rotor steel at elevated temperatures10.1016/j.matdes.2013.05.080 ↗
37. Intelligent method to develop constitutive relationship of Ti-6Al-2Zr-1Mo-1V alloy10.1016/S1003-6326(11)61341-1 ↗
38. Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy10.1016/j.matdes.2012.03.002 ↗
39. Artificial neural network approach to predict the flow stress in the isothermal compression of as-cast TC21 titanium alloy10.1016/j.commatsci.2011.01.015 ↗
40. Prediction of flow stress in dynamic strain aging regime of austenitic stainless steel 316 using artificial neural network10.1016/j.matdes.2011.09.060 ↗
41. Multilayer feedforward networks are universal approximators10.1016/0893-6080(89)90020-8 ↗
42. Application of artificial neural networks for modelling correlations in titanium alloys10.1016/j.msea.2003.09.029 ↗
43. Two flowing stress models for hot deformation of XC45 steel at high temperature10.1016/j.msea.2011.11.047 ↗
44. Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel10.1016/j.msea.2008.09.019 ↗
45. Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel10.1016/j.jmatprotec.2007.11.113 ↗
46. Constitutive modeling for elevated temperature flow behavior of 42CrMo steel10.1016/j.commatsci.2007.08.011 ↗
47. Research on the dynamic recrystallization behavior of GCr15 steel10.1016/j.msea.2007.11.123 ↗
48. A comparative study on constitutive relationship of as-cast 904L austenitic stainless steel during hot deformation based on Arrhenius-type and artificial neural network models10.1016/j.commatsci.2012.07.028 ↗
49. Artificial neural network modeling to evaluate and predict the deformation behavior of ZK60 magnesium alloy during hot compression10.1080/10426910903124894 ↗