Deposition of Al-Zn-Mg Alloy Coating on an A36 Steel Substrate: Evaluation of Microstructure, Porosity and Adherence
Source abstract
Abstract
Al and Zn-based metallic coatings are widely used to protect a significant diversity of steel components and structures from corrosion. The quality of coatings depends largely on their properties and spraying conditions. The purpose of this work was to find the optimal thermal spray parameters to manufacture Al-4.2%Zn-2%Mg alloy coatings on an A 36 steel substrate from diagnostic tests of porosity, adherence, and microstructure. Furthermore, adhesion of the coating onto the substrate after the precipitation heat treatment was investigated. Microstructural characterization was performed by scanning electron microscopy (SEM), the porosity was determined by Archimedes principle and the adhesion was evaluated by tensile testing. The optimum thermal spray distance, maintaining the thickness of the coating constant at 300 μm, was 0.20 m, in which the lowest porosity percent (9%) and the highest adherence (7.16 MPa) were attained. The coating increase of thickness and the post-heat treatment precipitation caused an adhesion decrease. However, heat-treated coatings with thicknesses between 150 and 300 µm could be used for cathodic protection of A36 steel because their adherence values (7.33 and 6.69 MPa, respectively) meet those required by the flame thermal spraying process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidad Autónoma Metropolitana, México
Universidad Nacional Autónoma de México (UNAM), México
Instituto Politécnico Nacional (IPN), México
Funding
CONAHCYT · SIP-IPN
References (25)
Show source-provided references
1. A review on corrosion of metals and protection
2. Overview of corrosion and its control: A critical review10.24874/PES03.01.002 ↗
3. Corrosion resistance and mechanical properties of low-alloy steels under atmospheric conditions10.1016/j.corsci.2004.04.009 ↗
4. Corrosion resistance and characterization of metallic coatings deposited by thermal spray on carbon Steel10.1016/j.matdes.2012.05.008 ↗
5. A review of recent developments in coating systems for hot-dip galvanized steel10.3389/fmats.2020.00074 ↗
6. Kuklík V · 2016
7. Effects of tin on Aluminum – Zinc – Magnesium alloy as sacrificial anode in seawater
8. Fagbayi K · 2000
9. Activation of aluminum anodes by the presence of intermetallic compounds10.1016/S0013-4686(96)00420-3 ↗
10. Fine scale precipitates in Al-Mg-Zn alloys after various aging temperatures
11. A review on thermally sprayed coating defects formation mechanism and microstructure modification
12. 1999
13. Establishing empirical relationships to predict porosity level and corrosion rate of atmospheric plasma-sprayed alumina coatings on AZ31B magnesium alloy10.1016/j.jma.2014.05.002 ↗
14. Porosity and its significance in plasma-sprayed coatings10.3390/coatings9070460 ↗
15. Petrov D · 2005 · 191
16. Pawlowski L · 2008
17. A mathematical model for the calculation of the adhesion of a flame sprayed coating of Aluminum on S 235 JR steel10.1007/s11666-011-9684-3 ↗
18. The effect of roughness and pre-heating of the substrate on the morphology of aluminum coatings deposited by thermal spraying10.1016/j.surfcoat.2005.02.200 ↗
19. Correlation between residual stresses and adhesion of plasma sprayed coatings: effects of a post-annealing treatment10.1016/S0040-6090(02)00805-2 ↗
20. Residual stresses and adhesion of thermal spray coatings10.1179/174329405X30020 ↗
21. Residual stresses in thermally sprayed coatings and their effects on interfacial adhesion: A review of recent work10.1007/BF02645271 ↗
22. Softening behavior of cold-sprayed aluminum-based coatings AA1200 and AA7075 during annealing10.1007/s11666-020-01121-7 ↗
23. Adhesion and residual stresses determination of thermally sprayed molybdenum on steel10.1016/S0257-8972(02)00818-6 ↗
24. Effect of heat treatment on corrosion resistance and adhesion property in Al-Mg-Zn multi-layer coated steel prepared by PVD10.1016/j.surfcoat.2016.10.043 ↗
25. Vuoristo P · 2014 · 229