Dislocation Density and Texture in Copper Deformed by Cold Rolling and Ecap
Source abstract
Abstract
Analysis of dislocation density in metallic materials has been pursued with great interest for many years because dislocations are closely associated with plastic deformation and thus exert a deep effect on the mechanical properties of any material. Crystallographic texture has also a decisive influence in some properties. In this work, the dislocation density was estimated from the line broadening of X-ray diffractograms using the Convolutional Multiple Whole Profile Program (CMWP) and crystallographic texture analyses were performed using inverse pole figures (IPF). The material used in this research was pure copper deformed by cold rolling and Equal Channel Angular Pressing (ECAP). The dislocation density values obtained by Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD) were compared and discussed. While, in the case of cold rolling, the crystallographic texture of the material was enhanced with increasing deformation, it was reduced with increasing deformation in the case of ECAP processing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Militar de Engenharia, Brazil
Universidade Federal de São Carlos, Brazil
References (27)
Show source-provided references
1. The development of deformation substructures in face-centred cubic metals10.1016/0921-5093(89)90332-8 ↗
2. High angle boundaries formed by grain subdivision mechanisms10.1016/S1359-6454(97)00027-X ↗
3. The Determination of dislocation densities in thin films10.1080/14786436108239679 ↗
4. Powder diffraction10.1088/0034-4885/59/2/002 ↗
5. Ribárik G · 2008
6. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
7. Van der Voort GF · 1984
8. Backofen WA · 1972
9. Principles of equal-channel angular pressing for the processing of ultra-fine grained materials10.1016/1359-6462(96)00107-8 ↗
10. Computer program ANIZC for the calculation of diffraction contrast factors of dislocations in elastically anisotropic cubic, hexagonal and trigonal crystals10.1107/S0021889802021581 ↗
11. Hirsch PB · 1965 · 247
12. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗
13. Substructure development in cold rolled copper single crystals10.1016/S0921-5093(01)01311-9 ↗
14. Assessment of Strain Energy by Measuring Dislocation Density in Copper and Aluminium Prepared by ECAP and ARB10.2320/matertrans.ME200707 ↗
15. Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis10.1016/j.actamat.2006.07.008 ↗
16. Dislocation density of pure copper processed by accumulative roll bonding and equal-channel angular pressing10.1016/j.matchar.2015.04.009 ↗
17. Densities and character of dislocations and size-distribution of subgrains in deformed metals by X-ray diffraction profile analysis10.1016/S0921-5093(01)01025-5 ↗
18. Quantitative defect evolution of nanocrystalline nickel during cold rolling10.1080/09500839.2011.652686 ↗
19. Microstructures and properties of copper processed by equal channel angular extrusion for 1-16 passes10.1016/j.actamat.2004.06.040 ↗
20. Mechanical, microstructural and electrical evolution of commercially pure copper processed by equal channel angular extrusion10.1016/j.msea.2013.01.076 ↗
21. Nano-grained pure copper with high-strength and high-conductivity produced by equal channel angular rolling process10.1016/j.jmatprotec.2011.01.009 ↗
22. Dislocation Density by X-ray diffraction in α Brass Deformed by Rolling and ECAE10.1590/1516-1439.369214 ↗
23. Microstructural study of an irradiated high-nickel alloy by X-ray line profile analysis and TEM observations10.1016/S0022-3115(96)00678-2 ↗
24. Characterization of the microstructure in random and textured polycrystals and single crystals by diffraction line profile analysis10.1016/j.msea.2010.08.059 ↗
25. The shearing characteristics associated with equal-channel angular pressing10.1016/S0921-5093(98)00750-3 ↗
26. The evolution of texture in an equal channel pressed aluminum AA105010.1016/j.msea.2014.10.073 ↗
27. Texture evolution and fraction of favorably oriented fibers in commercially pure aluminum processed to 16 ECAP passes10.1016/j.msea.2008.03.008 ↗