Nano-engineered composites: interlayer carbon nanotubes effect
Source abstract
Abstract
The concept of carbon nanotube interlayer was successfully introduced to carbon fiber/epoxy composites. This new hybrid laminated composites was characterized by Raman spectroscopy, X-ray diffraction, scanning electron microscopy and tensile tests. An increase on peak stress close to 85% was witnessed when CNTs interlayer with 206.30 mg was placed to carbon fiber/epoxy laminates. The failure mechanisms are associated to CNTs distribution between and around carbon fibers. These CNTs are also responsible for crack bridging formation and the increase on peak stress. Initial stiffness is strongly affected by the CNT interlayer, however, changes on stiffness is associated to changes on nano/micro-structure due to damage. Three different behaviors can be described, i.e. for interlayers with ≈ 60 mg of CNT the failure mode is based on cracks between and around carbon fibers, while for interlayers with CNT contents between 136 mg and 185 mg cracks were spotted on fibers and inside the CNT/matrix mix. Finally, the third failure mechanism is based on carbon fiber breakage, as a strong interface between CNT/matrix mix and carbon fibers is observed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Nanotechnology research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de Minas Gerais, Brazil
References (38)
Show source-provided references
1. Saito R · 2005 · 1
2. Analytical and numerical techniques to predict carbon nanotubes properties10.1016/j.ijsolstr.2006.02.009 ↗
3. The stress: strain behavior of polymer - nanotube composites from molecular dynamics simulation10.1016/S0266-3538(03)00059-9 ↗
4. Simulation of elastic properties of single-walled carbon nanotubes10.1016/S0266-3538(03)00074-5 ↗
5. A comparison of different methods of Young's modulus determination for single-wall carbon nanotubes (SWCNT) using molecular dynamics (MD) simulations10.1016/j.commatsci.2006.02.011 ↗
6. Atomistic simulations of nanotube fracture10.1103/PhysRevB.65.235430 ↗
7. Nanomechanical modeling of the nanostructures and dispersed composites10.1016/j.commatsci.2003.08.010 ↗
8. Computational materials: Multi-scale modeling and simulation of nanostructured materials10.1016/j.compscitech.2005.06.009 ↗
9. An introduction to computational nanomechanics and materials10.1016/j.cma.2003.12.008 ↗
10. Ruoff RS · 2006 · 199
11. A structural mechanics approach for the analysis of carbon nanotubes10.1016/S0020-7683(03)00056-8 ↗
12. Vibrational analysis of graphene based nanostructures10.1016/j.compstruc.2011.02.017 ↗
13. An investigation on post-fire behavior of hybrid nanocomposites under bending loads10.1016/j.compositesb.2010.02.002 ↗
14. Processing, characterization, and modeling of carbon nanotube-reinforced multiscale composites10.1016/j.compscitech.2008.10.019 ↗
15. An assessment of the science and technology of carbon nanotube-based fibers and composites10.1016/j.compscitech.2009.10.004 ↗
16. Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes10.1016/j.compscitech.2009.09.001 ↗
17. Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites10.1016/j.compstruct.2010.02.018 ↗
18. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review10.1016/j.compositesa.2010.07.003 ↗
19. The use of an electric field in the preparation of glass fibre/epoxy composites containing carbon nanotubes10.1016/j.carbon.2012.01.072 ↗
20. Improving the electrical conductivity of multi-walled carbon nanotube networks by H ion beam irradiation10.1016/j.carbon.2010.12.067 ↗
21. Anchorage of carbon nanotubes grown on carbon fibres10.1016/j.carbon.2005.09.024 ↗
22. Structure of and stress transfer in fibres spun from carbon nanotubes produced by chemical vapour deposition10.1016/j.carbon.2011.05.045 ↗
23. Impact and Delamination Failure of Multiscale Carbon Nanotube-Fiber Reinforced Polymer Composites: A Review10.5139/IJASS.2011.12.2.115 ↗
24. Carbon nanotube-based hierarchical composites: a review10.1039/c000041h ↗
25. Enhanced Fracture Properties of Carbon Reinforced Composites by the Addition of Multi-Wall Carbon Nanotubes10.1177/0021998308097735 ↗
26. Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based composites10.1016/j.engfracmech.2008.08.003 ↗
27. Joining prepreg composite interfaces with aligned carbon nanotubes10.1016/j.compositesa.2008.03.011 ↗
28. Criterion for interlaminar strength of CFRP laminates toughened with carbon nanofiber interlayer10.1016/j.compositesa.2011.01.005 ↗
29. Improvement of interlaminar mechanical properties of CFRP laminates using VGCF10.1016/j.compositesa.2009.09.002 ↗
30. Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion10.1177/0021998311410472 ↗
31. An experimental study of interlaminar shear fracture toughness of a nanotube reinforced composite10.1016/j.compositesb.2010.06.001 ↗
32. Fabrication and multifunctional properties of a hybrid laminate with aligned carbon nanotubes grown In Situ10.1016/j.compscitech.2008.02.028 ↗
33. A comparative study of the growth, microstructural and electrical properties of multiwall CNTs grown by thermal and microwave plasma enhanced CVD methods10.1016/j.physe.2011.06.035 ↗
34. Morphology and thermal characterization of nanographene platelets10.1007/s10853-011-5272-7 ↗
35. Raman spectroscopy of carbon nanotubes10.1016/j.physrep.2004.10.006 ↗
36. ASTM D 3039 Standard
37. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
38. Nanocomposites in context10.1016/j.compscitech.2004.11.003 ↗