journal article·2018-05-21Open access

On the Machinability and Surface Finish of Superalloy GH909 Under Dry Cutting Conditions

Ming Luo, Haizhen Li

Materials Research· Volume 21· Issue 4

Abstract

GH 909 alloy is a kind of low thermal expansion superalloy with high strength and low expansion coefficient. It is mainly used for manufacturing of aero-engine turbine casings, sealing ring, vanes and other gap control parts, to improve the working efficiency and thrust of the engine as well as to reduce gas loss and fuel consumption. However, the machinability is still a problem that restricts the application of GH909. This paper investigated the machinability referring to cutting forces, surface quality and tool wear in the milling process with carbide tool. The main conclusions are: (1) GH909 has similar machinability with other Nickel-based alloys, cutting velocity does not have great influence on cutting forces for small radial cutting depth. (2) Good machined surface quality can be get for cutting velocity around 70m/min. (3) To get good tool performance and reduce tool wear rate, cutting velocity can be set to no larger than 80m/min.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Northwestern Polytechnical University, China

References (26)

Show source-provided references
1. Machinability of nickel-based high temperature alloys10.1080/10940340008945703 ↗
2. Improving tool life in multi-axis milling of Ni-based superalloy with ball-end cutter based on the active cutting edge shift strategy10.1016/j.jmatprotec.2017.09.010 ↗
3. A new method to evaluate the machinability of difficult-to-cut materials10.1007/s00170-014-6126-7 ↗
4. Study of static and dynamic ploughing mechanisms by establishing generalized model with static milling forces10.1016/j.ijmecsci.2016.05.010 ↗
5. Tool path generation and optimization method for pocket flank milling of aircraft structural parts based on the constraints of cutting force and dynamic characteristics of machine tools10.1007/s00170-015-8050-x ↗
6. Machining nickel base superalloys Inconel 71810.1243/0954405981515617 ↗
7. Dry machining of Inconel 718, workpiece surface integrity10.1016/j.jmatprotec.2011.04.011 ↗
8. Behaviors of end milling Inconel 718 superalloy by cemented carbide tools10.1016/j.jmatprotec.2007.11.176 ↗
9. The effect of cutting speed and cutting tool geometry on machinability properties of nickel-base Inconel 718 super alloys10.1016/j.matdes.2005.12.008 ↗
10. Cutting forces and surface roughness in wet machining of Inconel alloy 738 with coated carbide tool10.1177/0954405414542990 ↗
11. Effects of cutting parameters on tool insert wear in end milling of titanium alloy Ti6Al4V10.3901/CJME.2016.0405.045 ↗
12. Surface Integrity Analysis in Machining of Hardened AISI 4140 Steel10.1590/1980-5373-mr-2016-0420 ↗
13. Identification of cutting force coefficients in machining process considering cutter vibration10.1016/j.ymssp.2017.09.038 ↗
14. Sikdar SK · 2007
15. Henderson AJ · 2010 · 193
16. An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts10.1016/j.jmatprotec.2006.07.009 ↗
17. Optimisation of tool life and productivity when end milling Inconel 718TM10.1016/j.jmatprotec.2007.01.017 ↗
18. Effects of tool orientation and surface curvature on surface integrity in ball end milling of TC1710.1007/s00170-017-0523-7 ↗
19. New observations on tool wear mechanism in dry machining Inconel 71810.1016/j.ijmachtools.2011.08.018 ↗
20. Tool wear mechanisms and multi-response optimization of tool life and volume of material removed in turning of N-155 iron-nickel-base superalloy using RSM10.1016/j.measurement.2015.03.006 ↗
21. Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning10.1080/10426914.2014.984216 ↗
22. Tool wear characteristics in machining of nickel-based superalloys10.1016/j.ijmachtools.2012.08.001 ↗
23. Machinability Evaluation in Hard Milling of AISI D2 Steel10.1590/1980-5373-MR-2015-0263 ↗
24. Determination of minimum uncut chip thickness during micro-end milling Inconel 718 with acoustic emission signals and FEM simulation
25. Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 71810.1016/j.jmapro.2012.03.003 ↗
26. Experimental investigation on removing cutting fluid from turning of Inconel 725 with coated carbide tools10.1016/j.jclepro.2014.05.098 ↗