Effect of Solid Solution Temperature on Microstructure and Corrosion Resistance of CoNiCrMo Alloy
Source abstract
Abstract
Influence of solid solution temperature on microstructures and corrosion properties of CoNiCrMo alloy were investigated by means of optical microscopy (OM), scanning electron microscope (SEM) and electronic differential system. The corrosion resistance of CoNiCrMo alloy in 0.9%NaCl aqueous solution was also investigated. The results indicated that with the increase of solution treatment temperature, the dendrites of CoNiCrMo alloy gradually disappeared. Thus, the corrosion resistance of the alloy decreased. When the solution temperature is 1200ºC, the dendrites almost disappeared and most carbide dissolved, and begins to spheroidization. The corrosion resistance of CoNiCrMo alloy treated at 1000ºC for 1h is the highest than the one at 1100 ºC and 1200ºC. Its self-corrosion potential is -424mV and self-corrosion current density is 1.02×10-8A/cm2.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nanjing Institute of Technology, P. R. China; Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology, P. R. China
Nanjing Institute of Technology, P. R. China
Shandong Jianzhu University, P. R. China
References (20)
Show source-provided references
1. Microstructure and compression strength of Co-based superalloys hardened by gamma’ and carbide precipitation10.1016/j.msea.2018.08.007 ↗
2. Hysteretic Behavior of Twin Boundary Peak Due to Precipitation in Co-Ni-Cr alloy10.1590/1980-5373-mr-2017-0896 ↗
3. The grain boundary pinning effect of the mu phase in an advanced polycrystalline gamma/gamma’ Co-base superalloy10.1016/j.jallcom.2018.04.204 ↗
4. The role of hard phase carbides in tribocorrosion processes for a Co-based biomedical alloy10.1016/j.triboint.2017.01.037 ↗
5. Development of Co-based bulk metallic glasses as potential biomaterials10.1016/j.msec.2016.05.025 ↗
6. A new antibacterial Co-Cr-Mo-Cu alloy: Preparation, biocorrosion, mechanical and antibacterial property10.1016/j.msec.2016.05.028 ↗
7. Porous vitalium-base nano-composite for bone replacement: Fabrication, mechanical, and in vitro biological properties10.1016/j.jmbbm.2016.01.026 ↗
8. Precipitates formation and evolution in a Co-based alloy produced by powder bed fusion10.1016/j.jallcom.2019.05.169 ↗
9. Biomaterials for hip implants - important considerations relating to the choice of materials10.1515/bams-2017-0017 ↗
10. Nikel, Cobalt and Titanium-based alloys-from aircraft vehicles to medical applications10.30544/235 ↗
11. Effect of heat treatment on phase transformations and magnetization of amorphous Co69Fe4Cr4Si12B11 microwires10.1016/j.jallcom.2018.01.114 ↗
12. Microstructure evolution and tribological properties of Co-based-VN alloy-Ti composite coatings by aging treatment10.1016/j.surfcoat.2017.10.003 ↗
13. Synchronous improvement in strength and ductility of biomedical Co-Cr-Mo alloys by unique low-temperature heat treatment10.1016/j.msea.2018.10.016 ↗
14. Hot compression deformation characteristics and microstructural evolution of a Co-Cr-Mo-C alloy: Effect of precipitate and martensitic transformation10.1016/j.msea.2016.01.084 ↗
15. Microstructure and Tribological Properties of Cobalt-based Stellite 6 Alloy Coating by Electro-Spark Deposition10.1590/S1516-14392013005000082 ↗
16. Hot compression deformation characteristics and microstructural evolution of a Co-Cr-Mo-C alloy: Effect of precipitate and martensitic transformation10.1016/j.msea.2016.01.084 ↗
17. Effect of thermal treatment and fluoride ions on the electrochemical corrosion behavior of selective laser melted CoCrW alloy10.1016/j.jallcom.2017.09.318 ↗
18. On the grain boundary strengthening effect of boron in gamma/gamma’ Cobalt-base superalloys10.1016/j.actamat.2017.12.020 ↗
19. Effects of iron content on the microstructure and corrosion behavior of Ti-30Zr-5Al-3V-xFe alloys10.1016/j.matchemphys.2018.07.033 ↗
20. Improved corrosion resistance of CoCrMo alloy with self-passivation ability facilitated by carbon ion implantation10.1016/j.electacta.2017.04.127 ↗