journal article·2018-01-22Open access

Effect of Specimens' Shape and Size on the Determination of Compressive Strength and Deformability of Cement-lime Mortars

Gustavo Henrique Nalon, Roseli Oliveira Guedes Martins, Rita de Cássia Silva Sant'Ana Alvarenga, Gustavo Emilio Soares de Lima, Leonardo Gonçalves Pedroti, White José dos Santos

Materials Research· Volume 20· Issue suppl 2

Abstract

This work presents comparative analyses of the effect of specimens' shape and size on the compressive strength and modulus of elasticity of mortars. Mortar mixtures with compressive strength between 5 and 20 MPa were produced. Experimental tests determined the compressive strength of cylinder specimens of (5 x 10) cm and (10 x 20) cm, and also cubic specimens resulted of mortar's flexural strength tests, which use (4 x 4 x 16) cm prisms. The modulus of elasticity of the cylinder specimens was also determined. Cubic specimens' compressive strength was higher than (10 x 20) cm cylinder's compressive strength and lower than (5 x 10) cm cylinder's compressive strength. The dimensions of the cylinder specimens influenced its compressive strength, which was higher for the (5 x 10) cm specimens. However, it did not affect the static modulus of elasticity of the material. Correlations between the results were established and comparisons with different authors' results were made, improving both technological control and characterization of cement-lime mortars.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de Viçosa - UFV, Brazil

Universidade Federal de Minas Gerais - UFMG, Brazil

References (25)

Show source-provided references
1. 2005
2. 2007
3. 2016
4. 2015
5. 2008
6. 2008
7. Matthys JH · 1990 · 194
8. Schmidt S · 1990 · 147
9. Properties of Mortar Using Cubes, Prism Halves, and Cylinder Specimens
10. Pinheiro GL · 2011
11. Lima JS · 2013
12. 2000
13. 2013
14. 2003
15. 2012
16. 1996
17. 1996
18. 2003
19. 2003
20. 2002
21. 2006
22. 2003
23. 2001
24. 2005
25. Brooks JJ · 2015