Experimental Study of VHCF Fractographic Features of Conventionally and Additively Manufactured Steels
Source abstract
Abstract
Materials produced by additive manufacturing (AM) have been extremely related to literature. However, there is still unconsolidated knowledge about the fatigue life and respective mechanisms of initiation of cracks predominant in the VHCF regime for these materials. What has been observed in materials produced by conventional routes is that fatigue cracks tend to nucleate from intrinsic defects of the material located internally or in subsurface regions. The change in the evolution process of fatigue cracks leads to the formation of a characteristic morphology on the fracture surface, known as “fish-eye”. Another widespread aspect observed on the fracture surfaces is the formation of a fine granular area (FGA) nearby the initiation sites. This work aims to investigate the mechanisms of crack nucleation in VHCF of two distinct materials: conventional steel, DIN 34CrNiMo6 and AISI 316L stainless steel produced by L-DED. The ultrasonic tests were carried out at a frequency of 20±0,5 kHz and R= -1. The S-N curves were obtained and fracture surfaces were analyzed, fish-eye and FGA formation was verified. FGA sizes were compared to values estimated by empirical equations. FGA and fish-eye sizes were related to stress amplitude and maximum stress intensity factor (SIF).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Pontifícia Universidade Católica do Rio de Janeiro, Brasil
References (28)
Show source-provided references
1. A review of ultrasonic testing applications in additive manufacturing: defect evaluation, material characterization, and process control10.1016/j.ultras.2020.106227 ↗
2. 2015
3. Miedzinski M · 2017
4. Gibson I · 2010
5. Mahamood RM · 2018
6. Microstructure and mechanical properties of AISI 316L produced by direct energy deposition-based additive manufacturing: a review10.3390/app10093310 ↗
7. Bathias C · 2005
8. Very high cycle fatigue - is there a fatigue limit?10.1016/j.ijfatigue.2010.05.009 ↗
9. How and why the fatigue SN curve does not approach a horizontal asymptote10.1016/S0142-1123(01)00123-2 ↗
10. Kazymyrovych V · 2009
11. Kazymyrovych V · 2010
12. An understanding of very high cycle fatigue of metals10.1016/S0142-1123(03)00147-6 ↗
13. Review and prospects for current studies on very high cycle of metallic materials for machine structural use10.1299/jmmp.3.425 ↗
14. Murakami Y · 2002
15. The effect of hydrogen on fatigue properties of steels used for fuel cell system10.1016/j.ijfatigue.2005.06.059 ↗
16. Factors influencing the GBF size of high strength steels in the very high cycle fatigue regime10.1016/j.msea.2010.10.017 ↗
17. Estimation of the size of GBF area on fracture surface for high strength steels in very high cycle fatigue regime10.1016/j.ijfatigue.2007.08.011 ↗
18. On the formation mechanisms of fine granular area (FGA) on the fracture surface for high strength steels in the VHCF regime10.1016/j.ijfatigue.2015.08.021 ↗
19. Correlation between fractographic aspects and stress intensity factor in very high cycle fatigue10.1016/j.prostr.2019.08.015 ↗
20. Fractographic features of VHCF tested specimens and their relation to stress intensity factor
21. Teixeira MC · 2018
22. Thiesen Jr A · 2021
23. 2022
24. Andrade MF · 2022
25. Fatigue life assessment in the very high cycle regime of AISI 316L stainless steel processed by L-DED additive manufacturing10.1016/j.prostr.2022.12.127 ↗
26. Very high cycle fatigue behavior of additively manufactured 316L stainless steel10.3390/ma13153293 ↗
27. Fatigue assessment using an integrated threshold curve method - applications
28. Interior crack initiation and growth behaviors and life prediction of carburized gear steel under high cycle fatigue and very high cycle fatigue10.1557/jmr.2015.182 ↗