On the Recycling of a Biodegradable Polymer: Multiple Extrusion of Poly (Lactic Acid)
Source abstract
Abstract
Poly (lactic acid) (PLA) was submitted up to five cycles of extrusion in order to evaluate the effect of mechanical recycling. The material was evaluated under two conditions, thoroughly dried before processing and without drying. The changes in the molecular weight, acidity, thermal properties and coloring were assessed after each extrusion, and with this information, mechanisms of degradation were purposed. Molecular weight was reduced at a maximum of 30% after the most aggressive condition; five cycles without drying, which caused also an increase in acidity due to hydrolysis. Thermal properties were not significantly altered, which in combination to the molecular weight decrease allow to infer the recyclability of PLA. However, the most degraded samples had developed strong yellowing, particularly for samples without drying, which could be a problem for final products.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Microplastics and Plastic Pollution · Carbon dioxide utilization in catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de São Carlos, Brasil
References (26)
Show source-provided references
1. Influence of processing parameters on the degradation of poly(L-lactide) during extrusion10.1002/1097-4628(20010321)79:12<2128::AID-APP1020>3.0.CO;2-# ↗
2. Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance10.1016/j.polymdegradstab.2011.12.019 ↗
3. Influence of recycling of poly(lactic acid) on packaging relevant properties10.1002/app.41532 ↗
4. Belgacem MN · 2008
5. Recycling of bioplastics: routes and benefits10.1007/s10924-020-01795-8 ↗
6. Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques10.1016/j.eurpolymj.2016.09.005 ↗
7. Recycling of bioplastics, their blends and biocomposites: A review10.1016/j.eurpolymj.2013.07.025 ↗
8. Life cycle assessment of Poly(Lactic Acid) (PLA): Comparison between chemical recycling, mechanical recycling and composting10.1007/s10924-016-0787-2 ↗
9. Characterisation of multi-extruded poly(lactic acid)10.1016/j.polymertesting.2009.01.012 ↗
10. Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical properties10.1016/j.polymdegradstab.2009.11.045 ↗
11. Effect of simulated mechanical recycling processes on the structure and properties of poly(lactic acid)10.1016/j.jenvman.2017.05.020 ↗
12. Close-looped recycling of polylactic acid used in 3D printing: an experimental investigation and life cycle assessment10.1016/j.jclepro.2018.06.275 ↗
13. Mechanical recycling simulation of polylactide using a chain extender10.1002/adv.21863 ↗
14. Mechanical recycling of poly(lactic acid): evaluation of a chain extender and a peroxide as additives for upgrading the recycled plastic10.1016/j.jclepro.2019.01.206 ↗
15. Chemical modification of poly(lactic acid) and its use as matrix in poly(lactic acid) poly(butylene adipate-co-terephthalate) blends10.1016/j.polymertesting.2017.09.010 ↗
16. Modeling of poly(L-lactide) thermal degradation: theoretical prediction of molecular weight and polydispersity index10.1002/app.12093 ↗
17. Degradation studies of some polyesters and polycarbonates - 1. Polactide: general features of the degradation under programmed heating conditions10.1016/0141-3910(85)90050-3 ↗
18. Thermal decomposition of biodegradable polyesters—II. Poly(lactic acid)10.1016/0141-3910(96)00102-4 ↗
19. Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)10.1016/j.polymdegradstab.2007.12.005 ↗
20. Influence of Processing Parameters on the Degradation of Poly (L -lactide) During Extrusion10.1002/1097-4628(20010321)79:12<2128::AID-APP1020>3.0.CO;2-# ↗
21. Polymer biodegradation: mechanisms and estimation techniques – A review10.1016/j.chemosphere.2008.06.064 ↗
22. New insights into the hydrolytic degradation of poly(lactic acid): participation of the alcohol terminus10.1016/S0032-3861(00)00646-7 ↗
23. Study of thermodegradation and thermostabilization of poly(lactide acid) using subsequent extrusion cycles
24. Androsch R · 2017 · 235
25. Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions10.1007/BF01498927 ↗
26. In-line monitoring of the thermal degradation of poly(l-lactic acid) during melt extrusion by UV–vis spectroscopy10.1016/j.polymer.2008.01.010 ↗