journal article·2022Open access

Enhancement of Barrier and Mechanical Performance of Steel Coated with Epoxy Filled with Micron and Nano Alumina Fillers

D. Saber, Abdulaziz H. Alghtani, Emad M. Ahmed, Bassem F. Felemban, Hafiz T. Ali, M. Megahed, Kh. Abd El-Aziz

Materials Research· Volume 25

Abstract

Steel is an essential part of our life as it is used in wide applications as food equipment and heavy construction. The polymeric coating prevents the deterioration of the properties of metals due to rust and corrosion. This study investigated a reinforced polymeric coating to steel for enhancing barrier and mechanical properties. A comparison between different configurations of double-layered polymeric coatings was attained. The results showed that a maximum enhancement of 16.7%, 18.9%, 32.6%, 8.5%, and 5.7% in tensile strength, tensile strain, toughness, flexural strength, and flexural strain, respectively were achieved with a coating of epoxy filled with 1wt% Al2O3 microparticles before 1wt% Al2O3 nanoparticles on both sides as compared with pure epoxy coating. Adding micro/nanoparticles to epoxy coating enhanced the barrier properties of the coated steel against salt solution and citric acid environment as compared to pure epoxy coated steel.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Taif University, Saudi Arabia

Zagazig University, Egypt

References (50)

Show source-provided references
1. Investigation of corrosion rate of mild steel in fruit juice environment using factorial experimental design10.1155/2020/5060817 ↗
2. Investigation of corrosion effect of mild steel on orange juice10.5897/AJB10.1426 ↗
3. Corrosion propagation challenges of mild steel in industrial operations and response to problem definition
4. Alternating multilayer structural epoxy composite coating for corrosion protection of steel10.1002/mame.201970035 ↗
5. Investigation into the effect of Cr2O3 nanoparticles on the protective properties of epoxy coatings on carbon steel in 3.5% NaCl solution by scanning electrochemical microscopy10.1134/S2070205119010167 ↗
6. A review on conducting polymers and nanopolymer composite coatings for steel corrosion protection10.3390/coatings9120807 ↗
7. Nanocomposite coatings on steel for enhancing the corrosion resistance: a review10.1177/0021998319857807 ↗
8. Corrosion protection of steel pipelines with metal-polymer composite barrier liners
9. Investigation on the anticorrosion, adhesion and mechanical performance of epoxy nanocomposite coatings containing epoxy-silane treated nano-MoO3 on mild steel10.1080/01694243.2019.1661658 ↗
10. Corrosion protection with polyaniline and polypyrrole as anticorrosive additives for epoxy paint10.1016/j.corsci.2007.10.006 ↗
11. Evaluation of mechanical properties and corrosion protection performance of surface modified nano-alumina encapsulated epoxy coated mild steel10.1007/s40735-019-0316-7 ↗
12. Enhancement of mechanical properties of aluminium / epoxy composites with silane functionalization of aluminium powder10.1016/j.compositesb.2011.12.010 ↗
13. Characterization of the fracture behavior of epoxy reinforced with nanometer and micrometer sized aluminum particles10.1016/j.compscitech.2005.12.001 ↗
14. Fabrication and characterization of functionally graded nanoclay/glass fiber/epoxy hybrid nanocomposite laminates10.1007/s13726-017-0552-y ↗
15. Mechanical properties of on/off-axis loading for hybrid glass fiber reinforced epoxy filled with silica and carbon black nanoparticles10.1080/10667857.2018.1454022 ↗
16. Influence of micro and nanofillers on mechanical properties of pultruded unidirectional glass fiber reinforced epoxy composite systems10.1177/0021998315588623 ↗
17. Mechanical Performance of glass/epoxy composites enhanced by micro- and nanosized aluminum particles
18. Studying the influence of nano-Al2O3 particles on the corrosion performance and hydrolytic degradation resistance of an epoxy/polyamide coating on AA-105010.1016/j.porgcoat.2014.04.017 ↗
19. Evaluation of anti-corrosion performance of modified gelatin-graphene oxide nanocomposite dispersed in epoxy coating on mild steel in saline media10.1016/j.colsurfa.2019.124341 ↗
20. Anticorrosive coatings: a review10.1007/s11998-008-9144-2 ↗
21. Nanotechnology in the food processing and packaging: an overview of its halalan tayyiban aspect
22. Tribological and corrosion behaviors of Al2O3/polymer nanocomposite coatings10.1016/j.wear.2005.06.013 ↗
23. Corrosion protection of steel by epoxy nanocomposite coatings containing various combinations of clay and nanoparticulate zirconia10.1016/j.corsci.2013.05.024 ↗
24. Corrosion resistance of ZrO2-TiO2 nanocomposite multilayer thin films coated on carbon steel in hydrochloric acid solution10.1016/j.matchar.2015.08.010 ↗
25. Studying the effects of micro and nano sized ZnO particles on the corrosion resistance and deterioration behavior of an epoxy-polyamide coating on hot-dip galvanized steel10.1016/j.porgcoat.2011.03.026 ↗
26. Effect of ultrasonic parameters on the mechanical properties of glass fiber reinforced polyester filled with nano-clay
27. Can ultrasonic parameters affect the impact and water barrier properties of nano-clay filled glass fiber/polyester composites?
28. Study of hybridization effect of new developed rice straw mat/ glass fiber reinforced polyester composite10.1080/15440478.2019.1688749 ↗
29. Citric acid: emerging applications of key biotechnology industrial product10.1186/s13065-017-0251-y ↗
30. Swain MR · 2012 · 97
31. Corrosion inhibition of mild steel in citric acid by aqueous extract of Piper Nigrum L10.1155/2012/803098 ↗
32. Enhancement of water barrier properties and tribological performance of hybrid glass fiber/epoxy composites with inclusions of carbon and silica nanoparticles10.1002/pat.4004 ↗
33. Fatigue behavior of pure polypropylene and recycled polypropylene reinforced with short glass fiber10.1177/0021998317729888 ↗
34. An experimental investigation on the effect of incorporation of different nanofillers on the mechanical characterization of fiber metal laminate10.1016/j.compositesb.2019.107277 ↗
35. Hybrid glass fibre reinforced composites with micro and poly-diallyldimethylammonium chloride (PDDA) functionalized nano silica inclusions10.1016/j.matdes.2014.09.052 ↗
36. Processing, Properties, and Applications of Polymer Nanocomposites Based on Layer Silicates : A Review10.1002/adv.21368 ↗
37. Integrated vacuum assisted resin infusion and resin transfer molding technique for manufacturing of nano-filled glass fiber reinforced epoxy composite
38. Understanding the effect of halloysite nanotubes addition upon the mechanical properties of glass fiber aluminum laminate10.1007/s12221-021-0656-z ↗
39. The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy10.1177/1528083718775978 ↗
40. Upgraded mechanical properties of diluent nano-filled glass/epoxy composites fabricated by vacuum assisted resin infusion10.1007/s12221-021-0210-z ↗
41. Mechanical properties and tensile fatigue of graphene nanoplatelets reinforced polymer nanocomposites10.1155/2013/565401 ↗
42. Study of rate dependent behavior of glass/epoxy composites with nanofillers using non-contact strain measurement10.1016/j.ijimpeng.2017.05.013 ↗
43. Tribological characterization of hybrid metal matrix composites processed by powder metallurgy10.1007/s40195-017-0568-5 ↗
44. Improvement of hardness and wear resistance of glass fiber-reinforced epoxy composites by the incorporation of silica/carbon hybrid nanofillers10.1080/03602559.2017.1320724 ↗
45. Nanocomposite coatings: preparation, characterization, properties, and applications10.1155/2018/4749501 ↗
46. Water transport in epoxy / MWCNT composites10.1016/j.eurpolymj.2013.05.010 ↗
47. Effect of Al2O3 nanoparticles on the mechanical and physical properties of epoxy composite10.1007/s13369-017-2955-7 ↗
48. Water absorption of epoxy/glass fiber/organo-montmorillonite nanocomposites10.3144/expresspolymlett.2007.18 ↗
49. Effect of water absorption on the mechanical properties of nanoclay filled recycled cellulose fibre reinforced epoxy hybrid nanocomposites10.1016/j.compositesa.2012.08.026 ↗
50. Effects of nano-silica addition on water absorption of glass fiber/epoxy composite