Microstructural Transformation in a Root Pass of Superduplex Stainless Steel Multipass Welding
Source abstract
Abstract
The microstructure of the root pass in a superduplex stainless steel multipass welding was investigated.Results showed that the welding metal has an austenite matrix with particles of sigma phase formed in the ferrite/austenite interface and intragranularly.Eventhough the filler metal is intended to keep the phase balance after welding,the welding metal presented a considerable decrease in the ferrite content and a high proportion of sigma phase. Despite the exposition to thermal cycles on every pass, the heat affected zone presented a microstructure consisting of ferrite and austenite with a small proportion of sigma phase.Therefore,the thermal cycles of every welding pass allowed the decomposition of ferrite into austenite and sigma phase in points close to the heat source, changing the final microstructure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Tecnológico de Veracruz, Mexico
References (23)
Show source-provided references
1. Simulation of the precipitation of sigma phase in duplex stainless steels10.1007/s11661-997-0005-x ↗
2. Merino C · 1994
3. Effects of nitrogen and high temperature aging on s phase precipitation of duplex stainless steel10.1016/j.msea.2005.03.111 ↗
4. Scanning Kelvin probe force microscopy study of chromium nitrides in 2507 super duplex stainless Steel--Implications and limitations10.1016/j.electacta.2010.08.038 ↗
5. Austenite reformation in the heat-affected zone of duplex stainless steel 220510.1016/j.msea.2005.11.025 ↗
6. Pit morphology and its relation to microstructure of 850ºC aged duplex stainless steel10.5006/1.3278167 ↗
7. Sigma phase precipitation in duplex stainless steel 220510.1016/j.msea.2006.08.107 ↗
8. Sigma phase morphologies in cast and aged super duplex stainless steel10.1016/j.matchar.2009.01.005 ↗
9. Estimation of cooling rate in the welding of plates with intermediate thickness
10. Influence of welding thermal cycles on microstructure and pitting corrosion resistance of 2304 duplex stainless steels10.1016/j.corsci.2011.10.039 ↗
11. Easterling K · 1992
12. Lippold JC · 2005
13. Fatigue performance and microanalysis of heat treated 2205 duplex stainless steel10.1179/026708399101506706 ↗
14. Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds10.1016/S0921-5093(03)00077-7 ↗
15. Davis JR · 1994
16. Decomposition of Austenite in Austenitic Stainless Steels10.2355/isijinternational.42.325 ↗
17. Prediction of Sigma Phase Precipitation in Super Duplex Stainless Steel Weldments10.1007/BF03263429 ↗
18. Effects of solution treatment and continuous cooling on σ-phase precipitation in a 2205 duplex stainless steel10.1016/S0921-5093(01)00911-X ↗
19. Redistribution of the substitutional elements Cr, Mo and Ni during σ and χ phase formation in a duplex stainless steel10.1002/srin.200100123 ↗
20. Solomon HD · 1982
21. Precipitation behavior of sigma phase in duplex stainless steels and weld metals
22. Kinetics of sigma phase formation in a Duplex Stainless Steel10.1590/S1516-14392009000300012 ↗
23. Prediction of Cooling Time for Ferrite-Austenite Transformation in Duplex Stainless Steel10.2355/isijinternational.35.1272 ↗