journal article·2021Open access

Role of Si Minor Addition on Glass Formation and Flow Stress Characteristics of a Zr-Based Metallic Glass

Indah Raya, Tzu-Chia Chen, Sigiet Haryo Pranoto, A. Surendar, Anatolij Sergeevich Utyuzh, Samaher Al-Janabi, Ayad F. Alkaim, Nguyen Tan Danh, Yasser Fakri Mustafa

Materials Research· Volume 24· Issue 6

Abstract

The characterization of strain rate effects near glass transition temperature (Tg) gives important information on flow behavior of metallic glasses (MGs). For this purpose, the tensile strain rate jump test was carried out near glass transition temperature to evaluate the flow behaviors of ZrCoAl(Si) MG ribbons. The primary thermal analyses showed that the Si minor addition into the ZrCoAl alloy leads to the betterment of thermal stability and the glass forming ability (GFA), correlated with the small size of Si atoms and subsequent formation of denser atomic clusters and thermodynamically liquid stabilization in the system. The tensile strain rate jump test indicated that minor adding of Si element decreases the sensitivity of glassy alloy to the flow stress and improves the stability of amorphous structure under increase in the strain rate and applied temperature. It was also observed that the viscosity behavior is more stable with the increase of the strain rate and temperature in the Si-added sample, implying the high capability of viscoplastic response in this state.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hasanuddin University, Indonesia

Dhurakij Pundit University, Thailand

Universitas Muhammadiyah Kalimantan Timur, Indonesia

Saveetha institute of medical and technical sciences, India

Sechenov First Moscow State Medical University, Russia

University of Babylon, Iraq

FPT University, Vietnam

University of Mosul, Iraq

References (45)

Show source-provided references
1. Effect of thermally grown amorphous oxide film on the corrosion resistance properties of Ni50Zr25Nb25 metallic glass in nitric acid medium10.1016/j.intermet.2019.106571 ↗
2. Dry wear behavior and mechanism of a Fe-based bulk metallic glass: description by Hertzian contact calculation and finite-element method simulation
3. Unveiling a new type of ultradense anomalous metallic glass with improved strength and ductility through a high-pressure heat treatment10.1038/s41427-019-0175-1 ↗
4. Tensile ductility and necking of metallic glass10.1038/nmat1984 ↗
5. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
6. Shear banding and fracture in large strain deformation: understanding the mechanics of flow localization from Zener’s time to the present
7. Effect of Zener-Hollomon parameter on the flow behavior of Zr-based metallic glass
8. Micromechanics constitutive model for predicting the stress–strain relations of particle toughened bulk metallic glass matrix composites10.1016/j.intermet.2017.07.015 ↗
9. Mesoscopic constitutive model for predicting failure of bulk metallic glass composites based on the free-volume model10.3390/ma11020327 ↗
10. Meso-mechanical constitutive model of bulk metallic glass matrix composites10.1016/j.mechmat.2016.09.008 ↗
11. Thermoplastic deformation behavior of a Fe-based bulk metallic glass within the supercooled liquid region10.1016/j.jmrt.2019.01.007 ↗
12. Creep in bulk metallic glasses. Transition from linear to non linear regime10.1016/j.msea.2018.11.066 ↗
13. Correlation between high temperature deformation and β relaxation in LaCe-based metallic glass10.3390/ma13040833 ↗
14. An atomic-level perspective of shear band formation and interaction in monolithic metallic glasses
15. Structural characteristics in deformation mechanism transformation in nanoscale metallic glasses10.1088/1361-648X/ab3529 ↗
16. Investigation of shear transformation zone and ductility of Zr-based bulk metallic glass after plasma-assisted hydrogenation10.1016/j.msea.2019.05.027 ↗
17. Plastic deformation mechanism of ductile Fe50Ni30P13C7 metallic glass10.1007/s12540-018-0181-9 ↗
18. Tensile deformation mechanism of a bulk metallic glass matrix composite using in situ neutron diffraction
19. Role of tensile elastostatic loading on atomic structure and mechanical properties of Zr55Cu30Ni5Al10 bulk metallic glass10.1016/j.msea.2019.03.058 ↗
20. A meso-mechanical constitutive model of bulk metallic glass composites considering the local failure of matrix10.1016/j.ijplas.2018.11.017 ↗
21. A failure mechanism based constitutive model for bulk metallic glass10.1016/j.mechmat.2018.07.005 ↗
22. Shear bands in materials processing: understanding the mechanics of flow localization from zener’s time to the present10.1115/1.4049353 ↗
23. A size-dependent constitutive model of bulk metallic glasses in the supercooled liquid region10.1038/srep08083 ↗
24. Effects of a minor addition of Si and/or Sn on formation and mechanical properties of Cu–Zr–Ti bulk metallic glass10.1016/j.msea.2005.12.102 ↗
25. Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor additions of Si10.1016/j.jallcom.2015.12.160 ↗
26. Influence of minor Si addition on the glass-forming ability and mechanical properties of Pd40Ni40P20 alloy10.1016/j.actamat.2009.02.028 ↗
27. Effects of minor Cu and Si additions on glass forming ability and mechanical properties of Co-Fe-Ta-B Bulk metallic glass10.1007/s12540-016-5220-9 ↗
28. Liquid dynamics and glass formation of Gd55Co20Al25 metallic glass with minor Si addition10.1016/j.jmst.2020.11.024 ↗
29. Effects of Si addition on glass-forming ability and crystallization behavior of DyCoAl bulk metallic glass10.1016/j.jallcom.2021.159964 ↗
30. Microalloying effect of Si on mechanical properties of Ti based bulk metallic glass10.1179/17535557A15Y.000000003 ↗
31. Effect of microalloying on the glass-forming ability of Cu60Zr30Ti10 bulk metallic glass10.1016/j.jnoncrysol.2007.08.057 ↗
32. Effects of minor Si addition on structural heterogeneity and glass formation of GdDyErCoAl high-entropy bulk metallic glass10.1016/j.jmrt.2021.01.035 ↗
33. Discovery of novel quaternary bulk metallic glasses using a developed correlation-based neural network approach10.1016/j.commatsci.2020.110025 ↗
34. Roles of minor additions in formation and properties of bulk metallic glasses10.1016/j.pmatsci.2006.07.003 ↗
35. Origin of stress overshoot in amorphous solids10.1016/j.mechmat.2014.10.002 ↗
36. High temperature deformation behaviors of the Zr63.36Cu14.52Ni10.12Al12 bulk metallic glass10.1007/s10853-016-9729-6 ↗
37. Characteristics of stress relaxation kinetics of La60Ni15Al25 bulk metallic glass10.1016/j.actamat.2015.07.020 ↗
38. Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation10.1016/j.mechmat.2014.07.004 ↗
39. High temperature deformation behavior of an optimized Nb–Si based ultrahigh temperature alloy10.1016/j.scriptamat.2016.01.033 ↗
40. Superplastic flow of a Mg-based bulk metallic glass in the supercooled liquid region10.1016/j.jnoncrysol.2006.06.023 ↗
41. Enthalpy relaxation in Cu46Zr45Al7Y2 and Zr55Cu30Ni5Al10 bulk metallic glasses by differential scanning calorimetry (DSC)10.1016/j.intermet.2010.08.042 ↗
42. Modulating heterogeneity and plasticity in bulk metallic glasses: role of interfaces on shear banding10.1016/j.ijplas.2019.03.007 ↗
43. Macroscopic tensile plasticity by scalarizating stress distribution in bulk metallic glass10.1038/srep21929 ↗
44. Effect of al addition on thermal stability and thermoplastic forming ability of Ti35Zr15Ni40Cu10 metallic glass in the supercooled liquid region
45. Pronounced nanoindentation creep deformation in Cu-doped CoFe-based metallic glasses10.1016/j.jallcom.2019.07.226 ↗