Effect of Friction Stir Welding on Microstructure and Mechanical Properties of uns C19400 Alloy Plates
Source abstract
Abstract
The welding of metallic materials by the Friction Stir Welding (FSW) method is a very attractive process for preserving their characteristics, especially for copper and its alloys that require high heat input and present many distortions by traditional methods. However, it is a great challenge to produce welds free of defects and maintain or improve their mechanical properties. In the current literature data on FSW parameters for copper and its alloys are scarce. In this study, tests were performed with a combination of four tool rotations (750, 850, 950, 1050 rev.min-1) and two welding speeds (20 and 60 mm.min-1), maintaining the tool inclination angle in 3° and waiting time of 5 seconds. The objective of this work is to analyze the microstructure and mechanical performance of lap joints of the UNS C19400 alloy joined by FSW. The process temperature was monitored to trace the heating profile of the process, in addition to microhardness and shear strength tests, in addition to optical microscopy for analysis. The joints welded by the parameters Ω 950 rev.mm-1 𝛖 20mm.min-1 obtained a mechanical performance of 73% compared to the characteristics of the base metal and despite the appearance of volumetric defects at the microstructural level, the metallurgical transformations of recovery and recrystallization of the grains observed in the microstructure played a key role in the result.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Federal de Educação Ciência e Tecnologia de São Paulo, Brasil
Termomecanica São Paulo S/A, Brasil; Universidade Presbiteriana Mackenzie, Brasil
Universidade Presbiteriana Mackenzie, Brasil
Termomecanica São Paulo S/A, Brasil
Universidade Presbiteriana Mackenzie, Brasil; Instituto de Pesquisas Energéticas e Nucleares, Brasil
References (33)
Show source-provided references
1. Studies on process parameters and tool geometry selecting aspects of friction stir welding-A review10.1016/j.matpr.2019.12.042 ↗
2. Review the common defects in friction stir welding
3. Friction stir welding: Types, merits & demerits, applications, process variables & effect of tool pin profile10.1016/j.matpr.2021.12.097 ↗
4. A coupled experimental and numerical analysis of AA6063 friction stir welding10.1177/09544062221085884 ↗
5. Welding and processing of metallic materials by using friction stir technique: a review
6. Heat transfer simulation and effect of tool pin profile and rotational speed on mechanical properties of friction stir welded AA5083-O10.5781/JWJ.2017.35.3.6 ↗
7. El-Sayed MM · 2018 · 11
8. Thomas WM · 1991
9. Friction stir welding: an overview on effect of tool variables10.1016/j.matpr.2021.07.487 ↗
10. Challenges, process requisites/inputs, mechanics and weld performance of dissimilar micro-friction stir welding (dissimilar μFSW): a comprehensive review10.1016/j.jmapro.2021.05.045 ↗
11. Effect of FSW traverse speed on mechanical properties of copper plate joints10.3390/ma13081937 ↗
12. Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints10.1016/j.jallcom.2007.06.009 ↗
13. Medeiros WW · 2020
14. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
15. Experimental study on friction stir welding of copper metals10.1016/j.jmatprotec.2010.05.019 ↗
16. Defects in friction stir welding of steel10.1007/s13632-018-0438-1 ↗
17. A detailed process design for conventional friction stir welding of aluminum alloys and an overview of related knowledge
18. The influences of rotational and welding speeds on microstructures and mechanical properties of friction stir welded Al5083 and commercially pure copper sheets lap joints10.1016/j.matdes.2012.06.029 ↗
19. 1990 · 2
20. 2020
21. Stir welding parameters effect on flat plates weld joints: a review10.1016/j.matpr.2020.11.396 ↗
22. Effect of heat input on the mechanical behaviour of Al-Cu FSW lap joints10.1590/1980-5373-mr-2017-0983 ↗
23. The joint properties of copper by friction stir welding10.1016/j.matlet.2003.08.014 ↗
24. Development of a fine-grained microstructure and the properties of a nugget zone in friction stir welded pure copper10.1016/j.scriptamat.2007.03.048 ↗
25. Effect of heat input conditions on microstructure and mechanical properties of friction-stir-welded pure copper10.1007/s11661-010-0254-y ↗
26. Optimum rotation speed for the friction stir welding of pure copper
27. Effect of tool pin profile on microstructure and mechanical properties of friction stir welded pure copper joints10.1016/j.matdes.2012.09.010 ↗
28. Effect of shoulder plunge depth on the weld morphology, macrograph and microstructure of copper FSW joints10.1016/j.jmapro.2016.04.001 ↗
29. Huaracán Pichún CA · 2018
30. Effect of welding heat input on the microstructure and mechanical properties of dissimilar friction stir-welded copper/brass lap joint10.1590/1980-5373-mr-2018-0599 ↗
31. Experimental analysis of dissimilar metal of copper and brass plates fabricated friction stir welding10.1016/j.matpr.2020.03.740 ↗
32. Analysis of the influence of friction stir welding on the microstructure and mechanical properties of alloy UNS-C27200 (CU-ZN)
33. 2017