Novel Process Method to Prepare Yttria Stabilized ZrO2 Beads Based on the Sol-Gel Titration Technology
Source abstract
Abstract
Based on the sol-gel titration technology, a novel process method to prepare the ZrO2 beads with the advantages of 130 nm grains and no pores is proposed. These advantages can greatly improve the bead density and hardness, decline the sintering temperature. Furthermore, the proposed method can prepare different types of the beads whose diameters range from 0.1 mm to 0.8 mm, and with uniform size and well spherical type. The density of the bead tested results mainly concentrate on 6.04 g/cm3, and the hardness on 1280 HV. The SEM investigation results illustrate that the bead grains are evenly distributed. The surface and cross section of the bead grains are consistent, no pores exist among the grains of finely polished section. The XRD tested results demonstrate that no monoclinic phase exists in the bead. The bead sintering temperature is only 1250 °C.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Anhui Triumph Applied Materials Co., LTD., China
References (21)
Show source-provided references
1. Development and application of ZrO2 basen nono composite ceramics
2. Effects of grinding equipment and technological parameters on particle size of zirconia powder
3. Enhanced efficiency in CO2-free hydrogen production from methane in a molten liquid alloy bubble column reactor with zirconia beads
4. Surfactant-stabilized copper paticles for low-temperature sintering: Paste preparation using a milling with small zirconia beads: effect of pre-treatment with the disperse medium10.1016/j.apt.2020.10.004 ↗
5. A novel model of ischemia in rats with middle cerebral artery occlusion using a microcatheter and zirconia ball under fluoroscopy10.1038/s41598-021-92321-w ↗
6. Initial deposition rate of latex particles in the packed bed of zirconia beads
7. Long-term effects on graphene supercapacitors of using a zirconia bowl and zirconia balls for ball-mill mixing of active materials10.3938/jkps.72.900 ↗
8. Development of low cost zirconia grinding balls, [J]
9. Lv BW · 2008
10. Structure of yttria stabilized zirconia beads produced by gel supported precipitation10.1007/s10853-006-0515-8 ↗
11. Effect of Al2O3 on the process performance of ZrO2 microspheres10.1007/s11595-020-2328-z ↗
12. Study on preparation of millimeter-sized alumina pellets by hot oil-drop method with pseudo-boehmite
13. Effect of polishing time and sintering temperature on properties of alumina balls
14. Study on preparation technique and properties of zirconia wear resistant ceramic beads manufactured by a roll-forming method
15. Ji YM · 2020
16. Effect of speed sintering system on mechanical properties od zirconia
17. The occurrence of metastable tetragonal zirconia as a crystallite size effect10.1021/j100888a024 ↗
18. Preparation of nanocrystalline zirconium dioxide powder
19. Preparation of tetragonal zirconia’s powder
20. Structure and properties of thermal barrier coating prepared by alumina coated zirconia composite powder
21. Effect of sintering temperature on peoperties of zirconia wear resistant ceramic ball