Fabrication of Ti10Fe5Si5Cr3Nb Composite Coatings on Ti-6Al-4V Alloy using Laser Cladding Technique
Source abstract
Abstract
Ti10Fe5Si5Cr3Nb composite coatings were fabricated using laser cladding technique. Laser power was varied from 800W to 1200W while the scanning speed was kept constant at 1.5 m/min. The microstructural analysis of the samples was conducted by using optical microscope, X-ray diffractometer and scanning electron microscope coupled with energy dispersive spectroscopy. Potentiodynamic polarization and diamond indenter were used to study the corrosion and microhardness properties of the alloy. The alloy exhibited a dendritic microstructure with Si-rich dispersed phase. Grain coarsening was observed to be dependent on coating depth. The microhardness was high at the top and decreased with coating depth. No improvement in corrosion resistance was noticed but the presence of Cr in the alloy promoted passivation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Tshwane University of Technology, South Africa
Council for Scientific and Industrial Research, South Africa
References (34)
Show source-provided references
1. Simultaneously enhancing strength and ductility of Ti-6Al-4V alloy with the hierarchical structure via a novel thermal annealing treatment10.1016/j.matchar.2021.111112 ↗
2. Microstructural investigation of direct laser deposition of the Ti-6Al-4V alloy by different melt pool conditions10.1016/j.jmrt.2021.04.087 ↗
3. High-strength β stabilized Ti-Nb-Fe-Cr alloys with large plasticity10.1016/j.msea.2018.07.031 ↗
4. NiTi coating on Ti-6Al-4V alloy by TIG cladding process for improvement of wear resistance: microstructure evolution and mechanical performances10.1016/j.jmatprotec.2018.07.033 ↗
5. An assessment of microstructure and properties of laser clad coatings of ultrafine eutectic β Ti-Fe-Nb-Sn composite for implants10.1016/j.surfcoat.2017.08.035 ↗
6. Microstructure and properties of titanium alumnides on Ti6Al4V titanium alloy produced by chemical vapor deposition method
7. Fabrication, microstructure and properties of electron beam-physical vapour deposited TiAl sheet and TiAl/Nb laminated composites10.1016/S1003-6326(06)60231-8 ↗
8. The effect of surface alloying of Ti powder for vacuum plasma spraying of open porous titanium coatings10.1016/j.actamat.2010.10.010 ↗
9. Microstructure and properties of in-situ synthesized (Ti3Al + TiB)/Ti composites by laser cladding10.1016/j.matdes.2018.07.045 ↗
10. Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy10.1016/S0921-5093(02)00076-X ↗
11. Microstructure and wear behaviors of laser-clad Cr13Ni5Si2-based metal-silicide coatings on a titanium alloy10.1016/j.surfcoat.2004.05.025 ↗
12. design and laser cladding of Ti-Fe-Zr alloy coatings10.1016/j.mtcomm.2015.02.005 ↗
13. Microstructure and wear resistance of NiCrBSi laser clad layer on titanium alloy substrate10.1016/S0257-8972(00)00904-X ↗
14. Laser cladding of TiAl intermetallic alloy on Ti6Al4V: process optimization and properties10.1016/j.phpro.2014.08.173 ↗
15. Properties comparison of Ti-Al-Si alloys produced various metallurgy methods10.3390/ma12193084 ↗
16. Microhardness of Ni-Cr alloys under different casting conditions10.1590/S1806-83242006000100008 ↗
17. Influence of α/β interface phase on the tensile properties of laser cladding deposited Ti-6Al-4V titamium alloy10.1016/j.jmst.2016.09.026 ↗
18. Microstructural, mechanical and electrochemical properties of AlCrFeCuNiWx high entropy alloys10.1016/j.jmrt.2021.01.103 ↗
19. Direct laser cladding of the silicide dispersed titanium alumnide (Ti45Al5Nb0.5Si) composites10.1016/j.optlastec.2018.03.012 ↗
20. Microstructure and properties of Ti-Al coating and Ti-Al-Si system coatings on Ti-6Al-4V fabricated by laser surface alloying10.1016/j.surfcoat.2016.10.082 ↗
21. A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder10.1016/j.matlet.2018.07.038 ↗
22. In-situ synthesis of Ti-Fe-based alloys prepared by the combination of mechanical alloying and laser melting deposition: microstructure and corrosion resistance10.1016/j.jallcom.2018.07.276 ↗
23. The effect of localized dynamic surface pre-heating in laser cladding od stellite 110.1016/j.surfcoat.2010.05.009 ↗
24. Resudual stress distribution in different depths of TiNi/Ti2Ni-based laser clad coating prepared at different environmental temperatures10.1016/S1003-6326(17)60229-2 ↗
25. Dry sliding wear behavior of laser clad TiVCrAlSi high enetropy alloy coatings on Ti-6Al-4V substrate10.1016/j.matdes.2012.04.049 ↗
26. Effect of heat treatment on residual stress and wear behaviors of the TiNi/Ti2Ni based laser cladding composite coatings10.1016/j.optlastec.2017.07.029 ↗
27. Synthesis and characterization of Ti-27.5Nb alloy made by Clad® additive manufacturing process for biomedical applications10.1016/j.msec.2017.02.060 ↗
28. Selective laser melting of titanium parts: influence of laser process parameters on macro- and microstructures and tensile property10.1016/j.powtec.2018.09.090 ↗
29. l. Wang, H. Sun, L.C. Zhang, Laves phase precipitation in Ti-Zr-Fe-Cr alloys with high strength and large plasticity10.1016/j.matdes.2018.05.035 ↗
30. Microstructural investigation of a rapidly solidified Ti-Zr-Fe-Si-Sn-Nb alloy
31. New beta-type Ti-Fe-Sn-Nb alloys with superior mechanical strength10.1016/j.msea.2017.08.060 ↗
32. Ti-Fe-Sn-Nb hypoeutectic alloys with superb yield strength and significant strain-hardening10.1016/j.scriptamat.2017.03.033 ↗
33. Corrosion study of laser cladded Ti-6Al-4V alloy in different corrosive environments10.1016/j.engfailanal.2019.01.023 ↗
34. Evolution in microstructure and corrosion behavior of AlCoCrxFeNi high entropy alloy coatings fabricated by laser cladding10.1016/j.jallcom.2018.10.091 ↗