Electrochemical Behavior of Co-Cr Alloy in Hygienic Tablets Solution
Source abstract
Abstract
Objective The aim of this study was to evaluate the electrochemical behavior of a cobalt-chromium (Co-Cr) dental alloy after immersion in denture cleansers. Method: Twenty-four specimens (Ø13x2mm) of Co-Cr were produced and divided into three groups (n=8) according to their experimental condition. The group 1 (control group) was composed only of distilled water, group 2 received a hygienic tablet (Corega Tabs™) at the moment that electrochemical test started, while the group 3 received the hygienic tablet (Corega Tabs™) 1h after immersion. The electrochemical tests recorded the open circuit potential (OCP) and current density (icorr). The surfaces of specimens were examined using a SEM. Data were statistically analyzed using analysis of variance (ANOVA) and Duncan test’ multiple comparisons post hoc analysis (α=0.05). Results: The values of OCP and icorr revealed statistically differences between the groups. The highest results were recorded for group 2 (-26.87±48.48mV; 0.29±0.22μA), which were similar to group 3 (-47.37±35.36mV; 0.26±0.10μA), and these values were difference to group 1 (-314.87±24.22mV; 0.50±0.17μA). SEM image show high corrosion with Corega Tabs™. Conclusion: The immersion in denture cleanser solution was not detrimental to the Co-Cr dental alloy and presented a lower tendency to corrosion process development than the control group.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade de São Paulo, Brasil
Universidade Federal do Ceará, Brasil
References (37)
Show source-provided references
1. Evaluation of procedures employed for the maintenance of removable dentures in eldery individuals
2. Dental casting alloys behavior during power toothbrushing with toothpastes with various abrasivities. Part I: wear behavior10.1007/s10856-008-3433-2 ↗
3. Evaluation of denture hygiene among removable denture wearers referred to clinics of Kerman, Iran
4. Effects of pH on the electrochemical behaviour of titanium alloys for implant applications10.1007/s10856-008-3623-y ↗
5. Patient attitude and habits regarding removable denture home hygiene and correlation with prosthesis cleanliness: a cross-sectional study of elderly Italians10.1016/j.prosdent.2021.01.024 ↗
6. Effervescent tablets and ultrasonic devices against Candida and mutans streptococci in denture biofilm10.1111/j.1741-2358.2010.00378.x ↗
7. Effect of denture cleansers on physical properties of heat-polymerized acrylic resin10.1016/j.jpor.2009.11.004 ↗
8. Efficacy of sodium hypochlorite and coconut soap used as disinfecting agents in the reduction of denture stomatitis, Streptococcus mutans and Candida albicans.10.1111/j.1365-2842.2004.01254.x ↗
9. Effect of denture cleansers on metal ion release and surface roughness of denture base materials10.1590/S0103-64402012000400013 ↗
10. A 2-year study of Candida-associated denture stomatitis treatment in aged care subjects10.1111/j.1741-2358.2005.00065.x ↗
11. Effect of different cleansers on the surface of removable partial denture10.1590/S0103-64402011000500008 ↗
12. Bicompatibility of dental casting alloys
13. Microbiologically influenced corrosion: looking to the future
14. Effect of surface areas ratios and bacteria on electrochemical behavior of galvanically coupled titanium
15. Fatigue and Fluoride Corrosion on Streptococcus mutans adherence to titanium-based implant/component surfaces10.1111/j.1532-849X.2009.00463.x ↗
16. Comparison of effects of bleach and cleansing tablet on reflectance and surface changes of a dental alloy used for removable partial dentures10.1177/0885328203018001001 ↗
17. Color stability, surface roughness and flexural strength of an acrylic resin submitted to simulated overnight immersion in denture cleansers10.1590/0103-6440201302151 ↗
18. Dry wear and tribocorrosion mechanisms of pulsed plasma nitrided Ni-Cr alloy10.1016/j.wear.2010.12.008 ↗
19. Corrosion behavior and surface analysis of a Co-Cr and two Ni-Cr dental alloys before and after simulated porcelain firing10.1111/j.1600-0722.2011.00791.x ↗
20. Tribocorrosion behavior of S-phase surface engineered medical grade CoCr alloy10.1016/j.wear.2013.01.023 ↗
21. Biocompatibility of dental casting alloys: a review10.1016/S0022-3913(00)80016-5 ↗
22. Corrosion resistance of nickel-chromium dental casting alloys10.1016/S0010-938X(77)80012-7 ↗
23. Study of corrosion between a titanium implant and dental alloys10.1016/0300-5712(94)90200-3 ↗
24. Electrochemical behaviour of Co-Cr and Ni-Cr dental cast alloys10.1016/S1003-6326(08)60350-7 ↗
25. The influence of the pure components of four different casting alloys on the electrochemical properties of the alloys10.1016/j.dental.2009.02.013 ↗
26. Corrosion behavior of dental metals and alloys in diferent media10.1046/j.1365-2842.1998.00305.x ↗
27. Influence of pH and inhibitors on the tribocorrosion of titanium in artificial saliva10.1016/j.wear.2006.03.031 ↗
28. Electrochemical behavior of titanium in artificial saliva: influence of pH10.1563/AAID-JOI-D-11-00054 ↗
29. Corrosion resistance of three orthodontic brackets: a comparative study of three fluoride mouthwashes10.1093/ejo/cji050 ↗
30. Influence of a fluoridated medium with different pHs on commercially pure titanium-based implants10.1111/j.1532-849X.2008.00391.x ↗
31. Effect of fluoride sodium mouthwash solutions on cpTi: evaluation of physicochemical properties10.1590/S0103-64402012000500005 ↗
32. Elements released from dental casting alloys and their cytotoxic effects
33. Corrosion of alloys used in dentistry: a review10.1016/j.msea.2006.05.003 ↗
34. Corrosion of CoCr and NiCr dental alloys alloyed with palladium10.1016/S0022-3913(10)60188-6 ↗
35. The effect of long-term disinfection procedures on hardness property of resin denture teeth10.1111/j.1741-2358.2011.00520.x ↗
36. Effect of experimental Ricinus communis solution for denture cleaning on the properties of acrylic resin teeth10.1590/S0103-64402012000100003 ↗
37. Effect of denture cleansers on the surface roughness and hardness of a microwave-cured acrylic resin and dental alloys10.1111/j.1532-849X.2004.04028.x ↗