A New Two-Step Method for Laser Cladding of Silicon Carbide in Wc-Co Substrates
Source abstract
Abstract
WC-Co cutting tools are widely used by the metalworking industry. In order to improve the properties of these tools, research on the application of wear-resistant coatings, such as polycrystalline diamond, are of great importance to several applications. It is known that the occurrence of high-stress levels between the coating and the substrate can lead to adhesion failures. One strategy to minimize these failures is applying an intermediate layer of SiC. In this work, the deposition of a SiC layer was carried out by a novel two-step laser cladding approach. Instead of cladding directly the pre-synthesized SiC on the substrates, a 200 µm silicon powder layer was pre-deposited on the WC-Co substrates and then irradiated with a 30 W CO2 laser. To improve metallurgical bonding between the tungsten and the Si layer, all substrates were chemically attacked. This attack allows cobalt removal from the surface and increases surface roughness, improving the laser cladding process. After the SiC laser cladding, samples were coated with a 200 µm graphite powder layer and irradiated again by a CO2 laser. The samples were characterized by SEM, EDS, and XRD analysis. The results showed that in the first step, an irradiation energy of about 0.27 J was enough to fuse the silicon powder to the substrate and in the second step, 0.13 J was enough to promote the reaction between silicon, carbon and the WC substrate, resulting in the in-situ synthesis of SiC. Finally, a new method was proposed for the deposition of SiC on WC-Co based substrates and the observed results allowed the proposal of an empirical equation to describe the chemical reactions of the process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Tecnológico de Aeronáutica, Brasil; Instituto de Estudos Avançados, Brasil
Instituto Tecnológico de Aeronáutica, Brasil
Instituto de Estudos Avançados, Brasil
Instituto de Estudos Avançados, Brasil; Instituto Federal de São Paulo, Brasil
References (34)
Show source-provided references
1. Sinterização do compósito metal duro WC-Co
2. High-performance coatings for cutting tools10.1016/j.cirpj.2016.11.004 ↗
3. Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates10.1016/j.apsusc.2009.10.092 ↗
4. CVD of alternated MCD and NCD films on cemented carbide inserts10.1520/JAI103242 ↗
5. Study of thermal expansion and thermal conductivity of cemented WC-Co composite10.1016/j.ijrmhm.2014.06.009 ↗
6. Laser cladding of SiC multilayers for diamond deposition on steel substrates10.1016/j.diamond.2016.02.007 ↗
7. Effect of substrate temperature on SiC interlayers for diamond coatings deposition on WC-Co substrates10.1016/j.vacuum.2014.06.001 ↗
8. WC-Co substrate preparation and deposition conditions for high adhesion of CVD diamond coating
9. Adhesion and wear resistance of CVD diamond coatings on laser treated WC-Co substrates10.1016/j.wear.2011.01.042 ↗
10. Effects of working pressure and substrate temperature on the structure and mechanical properties of nanocrystalline SiC thin films deposited by bias-enhanced hot filament chemical vapor deposition10.1016/j.tsf.2014.03.024 ↗
11. New multilayered diamond/β-SiC composite architectures for high-performance hard coating10.1016/j.matdes.2019.108207 ↗
12. Growth of β-SiC interlayers on WC-Co substrates with varying hydrogen/tetramethylsilane flow ratio for adhesion enhancement of diamond coatings10.1016/j.surfcoat.2015.03.054 ↗
13. One step deposition of highly adhesive diamond films on cemented carbide substrates via diamond/β-SiC composite interlayers10.1016/j.apsusc.2015.10.165 ↗
14. A study of diamond film deposition on WC-Co inserts for graphite machining: effectiveness of SiC interlayers prepared by HFCVD10.1016/j.diamond.2008.03.017 ↗
15. Diamond deposition on WC-Co substrate with amorphous SiC interlayer10.1179/1743294414Y.0000000250 ↗
16. Properties of amorphous SiC coatings deposited on WC-Co substrates10.1590/S1516-14392003000100007 ↗
17. Deposition of diamond/β-SiC/cobalt silicide composite interlayers to improve adhesion of diamond coating on WC-Co substrates by DC-Plasma Assisted HFCVD10.1016/j.surfcoat.2010.11.014 ↗
18. Synthesis and potential applications of silicon carbide nanomaterials / nanocomposites10.1016/j.ceramint.2022.07.204 ↗
19. Synthesis and properties of diamond - silicon carbide composite layers10.1016/j.jallcom.2019.06.016 ↗
20. Performance of laser surface textured cemented carbide tools during abrasive machining: coating effects, surface integrity assessment and wear characterization10.1016/j.cirpj.2020.10.006 ↗
21. Joining of sintered SiC ceramics at a lower temperature using borosilicate glass with laser cladding Si modification layer10.1016/j.jeurceramsoc.2020.11.044 ↗
22. Yoshida K · 2015 · 173
23. Effect of sintering temperature on density and mechanical properties of solid-state sintered silicon carbide ceramics and evaluation of failure origin10.1007/s11665-018-3397-4 ↗
24. Silicon carbide nanocrystals produced by femtosecond laser pulses10.1016/j.diamond.2017.11.014 ↗
25. A novel method of synthesizing graphene for electronic device applications10.3390/ma11071120 ↗
26. Teleginski V · 2016
27. Chagas DC · 2016
28. Steen WM · 2010
29. Gedda H · 2004
30. Influence of different post treatments on tungsten carbide-cobalt inserts
31. Reaction-assisted sintering and platelet growth by adiabatic heating in WC-Si cermets10.1016/j.scriptamat.2013.09.024 ↗
32. Characterization of the W2C phase formed during the high velocity oxygen fuel spraying of a WC + 12 pct Co powder10.1007/s11661-999-0002-3 ↗
33. High-accuracy, midinfrared (450 cm -1 ≤ω≤4000 cm -1) refractive index values of silicon10.1063/1.1923612 ↗
34. Optical constants from the far infrared to the x-ray region: Mg, Al, Cu, Ag, Au, Bi, C, and Al2O310.1364/JOSA.65.000742 ↗