journal article·2020Open access

Sodium Silicate Cold-Bonded Chromite Pellets for the Ferrochromium Industry – Identifying a Suitable Process

S.P. du Preez, Z. Maree, J.P. Beukes

Materials Research· Volume 23· Issue 4

Abstract

Chromite fines (defined as particles smaller than 6 mm) account for a significant fraction of mined South African chromite ore. These fines are pelletized to allow safe furnace smelting conditions. However, pelletization is an energy- and cost-intensive process that requires significant capital investment and has high operational costs as continuous curing temperatures of 1300 – 1500 °C are required. In this study, various cold-bonded pelletization processes were investigated to identify a process to prepare cold-bonded chromite pellets. A feasible process was identified and developed to produce mechanically strong chromite pellets using 3wt% sodium silicate-3 wt% SiO2 as the binder and KOH as an alkaline activator. The binding mechanism is based on the combined effects of sodium silicate and geopolymerization. It was determined that pellets cured at 75 °C had compressive strengths of 2.41 – 3.12 kN. The mechanical strength of these cold-bonded pellets where similar to, or exceed that of pellets currently used in the FeCr industry.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Advanced materials and composites · Metal Extraction and Bioleaching

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

North-West University, South-Africa

References (69)

Show source-provided references
1. Oxide mineralogy of the upper mantle
2. A proton-and electron-microprobe study of gallium, nickel and zinc distribution in chromian spinel10.1016/0024-4937(95)99071-4 ↗
3. The physical chemistry of thermal decomposition of South African chromite minerals10.1007/s11663-005-0008-1 ↗
4. Theoretical and practical aspects of Cr(VI) in the South African ferrochrome industry
5. Techno-economic feasibility of a pre-oxidation process to enhance prereduction of chromite10.17159/2411-9717/2017/v117n5a8 ↗
6. Chrome ore beneficiation challenges and opportunities: a review10.1016/j.mineng.2010.12.001 ↗
7. Gasik M · 2013
8. Basson J · 2013
9. Chromite: mineralogy and processing10.1016/0892-6875(88)90045-3 ↗
10. Cr(VI) generation during sample preparation of solid samples: a chromite ore case study10.4314/wsa.v36i1.50913 ↗
11. Riekkola-Vanhanen M · 1999
12. Unique challenges of clay binders in a pelletised chromite pre-reduction process10.1016/j.mineng.2012.03.021 ↗
13. Gediga J · 2007
14. Du Preez SP · 2018
15. Niemelä P · 2004 · 68
16. Comparison of physical properties of oxidative sintered pellets produced with UG2 or metallurgical-grade South African chromite: a case study10.17159/2411-9717/2015/v115n8a6 ↗
17. The effect of carbonaceous reductant selection on chromite pre-reduction10.1007/s11663-016-0878-4 ↗
18. Iyengar M · 1968
19. The Grangcold Process
20. Steaming iron-ore pellets
21. Hardening of cement-binder pellets in a moist-air atmosphere at ordinary temperature
22. A review of binders in iron ore pelletization10.1080/08827500306896 ↗
23. Cr (VI) generation during flaring of co-rich off-gas from closed ferrochromium submerged arc furnaces10.1007/s11663-014-0244-3 ↗
24. Review of Cr(VI) environmental practices in the chromite mining and smelting industry – Relevance to development of the Ring of Fire, Canada10.1016/j.jclepro.2017.07.176 ↗
25. Du Preez SP · 2014
26. Aqueous solubility of Cr(VI) compounds in ferrochrome bag filter dust and the implications thereof10.4314/wsa.v43i2.13 ↗
27. The soda-ash roasting of chromite ore processing residue for the reclamation of chromium10.1007/s11663-001-0087-6 ↗
28. Gericke WA · 1995 · 131
29. Humic substance-based binder in iron ore pelletization: a review10.1080/08827508.2017.1328598 ↗
30. Review of organic binders for iron ore concentrate agglomeration
31. Study of organic and inorganic binders on strength of iron oxide pellets10.1007/s11663-013-9838-4 ↗
32. Naiker O · 2007 · 113
33. Binder behavior on chromite-carbon composite pellets10.1590/1980-5373-mr-2016-0264 ↗
34. Recycling pre-oxidized chromite fines in the oxidative sintered pellet production process10.17159/2411-9717/2019/v119n2a13 ↗
35. Characterisation and liberation of chromium from fine ferrochrome waste materials10.1016/j.mineng.2013.11.004 ↗
36. Jain P · 2003
37. Why is CaCO3 not used as an additive in the pelletised chromite pre-reduction process?10.1016/j.mineng.2013.02.015 ↗
38. Utilisation of pre-oxidised ore in the pelletised chromite pre-reduction process10.1016/j.mineng.2016.03.005 ↗
39. Phase evolution on heat treatment of sodium silicate water glass10.1016/j.jnoncrysol.2007.08.037 ↗
40. Zhao B · 2010 · 263
41. Neural network-based approaches for forward and reverse mappings of sodium silicate-bonded, carbon dioxide gas hardened moulding sand system10.1080/10426910802543681 ↗
42. Modelling of CO2 moulding process
43. High carbon ferro chrome slag: alternative mould material for foundry industry10.1016/j.proenv.2016.07.046 ↗
44. Sodium silicate glass as an inorganic binder in foundry industry
45. Geopolymers form room temperature ceramic matrix10.1080/08871949.1988.11752155 ↗
46. Palomo A · 1992 · 505
47. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
48. Autef A · 2012 · 13
49. Utilisation of fly ash in a geopolymeric material10.1016/S0883-2927(02)00005-7 ↗
50. The potential use of geopolymeric materials to immobilise toxic metals: part I. Theory and applications10.1016/S0892-6875(97)00046-0 ↗
51. Factors affecting the immobilization of metals in geopolymerized flyash10.1007/s11663-998-0032-z ↗
52. The potential use of geopolymeric materials to immobilise toxic metals: part II. Material and leaching characteristics10.1016/S0892-6875(98)00121-6 ↗
53. Effect of source materials on geopolymerization10.1021/ie0206958 ↗
54. Properties of cementless mortars activated by sodium silicate10.1016/j.conbuildmat.2007.07.003 ↗
55. McCullough S · 2010
56. Carbothermic reduction of chromite fluxed with aluminum spent potlining10.1016/S1003-6326(18)64929-5 ↗
57. Morphology and composition of chromite in komatiites from the Belingwe greenstone belt, Zimbabwe
58. On the development of fly ash-based geopolymer concrete
59. Kinetics of geopolymerization: role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
60. The effects of inorganic salt contamination on the strength and durability of geopolymers10.1016/S0927-7757(02)00239-X ↗
61. Effect of alkali cations on aluminum incorporation in geopolymeric gels10.1021/ie0494216 ↗
62. Investigation of geopolymer binders with respect to their application for building materials
63. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
64. Silicon carbide formation enhanced by in-situ-formed silicon nitride: an approach to capture thermal energy of co-rich off-gas combustion10.1007/s11663-018-1413-6 ↗
65. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
66. Geopolymer matrices with improved hydrothermal corrosion resistance for high-temperature applications10.1007/s10853-006-0526-5 ↗
67. Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite10.1039/b212629j ↗
68. Microstructure of sodium polysialate siloxo geopolymer10.1016/j.ceramint.2004.06.006 ↗
69. Properties of sodium silicate bonded sand hardened by microwave heating