Effects of Pouring Temperature on Microstructure and Mechanical Properties of the A356 Aluminum Alloy Diecastings
Source abstract
Abstract
Diecastings of the A356 aluminum alloy were produced by rheo-diecasting (RDC) and High pressure die casting (HPDC), the microstructures of primary solidification, secondary solidification and eutectic Si of diecastings with different pouring temperature were explored and the mechanical properties of different parameters were tested. The result shows that the primary α-Al grains in RDC with self-inoculation method (SIM) are smaller and rounder than the dendrite structure in HPDC. During the RDC process, the amount of primary α-Al grains, average grain size and the lamellar spacing of the eutectic Si increase with the decrease of the melt treatment temperature. While the average grain size and the shape factor are gradually increasing with the increase of melt treatment temperature. As a result, RDC can significantly improve the mechanical properties of the A356 aluminum alloy compared with HPDC, the mechanical properties are optimal at 600°Cwith the tensile strength and elongation are 268.67MPa and 6.8%, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Hexi University, China; Hexi University, China
Lanzhou University of Technology, China
References (28)
Show source-provided references
1. Influence of rheo-diecasting processing parameters on microstructure and mechanical properties of hypereutectic Al-30%Si alloy10.1016/S1003-6326(17)60147-X ↗
2. Heat treatment of high-pressure die castings10.1007/s11661-007-9285-4 ↗
3. Die erosion and its effect on soldering formation in high pressure die casting of aluminium alloys10.1016/S0261-3069(99)00035-7 ↗
4. Preparation and rheocasting of semisolid slurry of 5083 Al alloy with indirect ultrasonic vibration process10.1016/j.msea.2011.08.014 ↗
5. Microstructure and property of rheocasting aluminum-alloy made with indirect ultrasonic vibration process10.1016/j.matlet.2012.01.040 ↗
6. Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment10.1016/j.actamat.2005.09.033 ↗
7. Effects of injection velocity on microstructure, porosity and mechanical properties of a rheo-diecast Al-Zn-Mg-Cu aluminum alloy10.1016/j.jmatprotec.2017.05.033 ↗
8. Microstructure characteristics and solidification behavior of wrought aluminum alloy 2024 rheo-diecast with self-inoculation method
9. Effect of melt superheating treatment on solidification microstructure of AZ31 magnesium alloy
10. Grain refining effect of Al-Ti-C master alloy on Mg-Al alloy
11. Controlling microstructures of AZ31 magnesium alloys by an electromagnetic vibration technique during solidification: from experimental obsvervation to theoretical understanding10.1016/j.actamat.2007.04.035 ↗
12. Effect of inoculant parameters on AM60 Mg alloy semisolid slurry prepared by self-inoculation method (II)
13. Microstructure control of AZ31 alloy by self-inoculation method for semisolid rheocasting10.1016/S1003-6326(13)62501-7 ↗
14. Effects of forming processes on microstructures and mechanical properties of A356 aluminum alloy prepared by self-inoculation method
15. Secondary solidification behaviour of the Al-Si-Mg alloy prepared by the rheo-diecasting process10.1016/j.actamat.2006.10.018 ↗
16. Growth of primary particles during secondary cooling of a rheocast alloy10.1016/j.jallcom.2008.07.090 ↗
17. Dynamical solidification behaviors and metal flow during continuous semisolid extrusion process of AZ31 alloy
18. Microstructure formation mechanism during a novel semisolid rheo-rolling process of AZ91 magnesium alloy10.1007/s40195-012-0261-7 ↗
19. Secondary solidification behaviour of AA8006 alloy prepared by suction casting10.1016/S1005-0302(11)60141-2 ↗
20. Secondary solidification behavior of A356 Aluminum alloy prepared by the self-inoculation method10.3390/met7070233 ↗
21. Effects of melt treatment temperature and isothermal holding parameter on water-quenched microstructures of A356 aluminum alloy semisolid slurry10.1016/S1003-6326(18)64673-4 ↗
22. Hu GX · 2015
23. Microstructure and thermal stability of melt-spun Al-Nd and Al-Ce alloy ribbons10.1007/BF01152938 ↗
24. Effects of alloy materials and process parameters on the heat transfer coefficient at metal/die interface in high pressure die casting
25. Microstructural characteristic and secondary solidification behavior of AZ91D alloy prepared by thixoforming
26. Numerical modeling of cellular/dendritic array growth: spacing and structure predictions10.1007/BF02648950 ↗
27. Growth of interdendritic eutectic in directionally solidified Al-Si alloys10.1007/BF02668564 ↗
28. Formation and segregation of primary silicon in Bridgman solidified Al-18.3wt% Si alloy