Mechanical Properties of UNS S39274 Superduplex Stainless Steel Work Hardened and Solution Annealed
Source abstract
Abstract
UNS S39274 is a W-alloyed superduplex stainless steel used in critical services in the oil and gas production. This material was selected for tubullars used in oil country tubular goods, below the Christmas tree. In order to achieve high mechanical strength the seamless tubes are cold drawn in a costly operation. In this work the mechanical properties of a cold drawn seamless were characterized and compared to three solution treated materials. Tensile curves were obtained and modelled by Hollomon’s, Ludwik’s and Voce’s models, where the last one presented the higher correlation coefficients in all cases. The hardness and impact toughness at -46oC were measured and discussed. The results were analyzed taking into aconunt the microstructural changes produced by cold drawning and annealing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de Itajubá, Brasil
Centro Federal de Educação Tecnológica Celso Suckow da Fonseca, Brasil
Centro Federal de Educação Tecnológica Celso Suckow da Fonseca, Brasil; Universidade Federal Fluminense, Brasil
References (25)
Show source-provided references
1. 2015
2. Influence of step annealing temperature on the microstructure and pitting corrosion resistance of SDSS UNS S32760 welds10.1007/s11665-011-9834-2 ↗
3. Effect of W on stress corrosion cracking susceptibility of newly developed Ni-saving duplex stainless steels10.1007/s12540-017-6356-y ↗
4. Effect of tungsten on the pitting and crevice corrosion resistance of type 25Cr super duplex stainless steels10.5006/2185 ↗
5. Effects of aging at 475oC on corrosion properties of tungsten-containing duplex stainless steels10.1016/S0010-938X(02)00079-3 ↗
6. Corrosion problems in the oil country tubular goods and their mitigation – a review10.1108/ACMM-09-2016-1708 ↗
7. Francis R · 1993 · 577
8. 2020
9. Modeling and numerical validation of stress-strain curves of maraging steels, grades 300 and 350 under hydrogen embrittlement10.1590/1980-5373-mr-2020-0431 ↗
10. Ludwik P · 1909
11. Tensile deformation
12. Characterization of the behavior of a metallic fiber woven structure10.1177/0040517511398944 ↗
13. 2019
14. Duplex steels. Part II: carbides and nitrides10.1007/s13632-013-0088-2 ↗
15. Precipitation of chromium nitrides in the super duplex stainless Steel 250710.1007/s11661-014-2718-y ↗
16. The influence of chromium nitrides precipitation on the fatigue behavior of duplex stainless steels10.1016/j.proeng.2014.06.246 ↗
17. Microstructures and yield strength of nitrogen alloyed superduplex stainless steel10.1016/S1359-6454(96)00263-7 ↗
18. 2020
19. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties10.1016/j.matdes.2017.07.046 ↗
20. Using the hollomon model to predict strain-hardening in metals
21. Hosford WF · 2010 · 65
22. Dieter GE · 1988 · 287
23. Comparison between hot rolled and powder metallurgy–Hot Isostatic Pressing (PM-HIP) processed duplex stainless steel UNS S32205
24. 2013
25. The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels10.1007/s11661-003-0304-9 ↗