PLA/PHBV/SEP/ZnO Hybrid Composites for Antimicrobial Multifunctional Packaging
Source abstract
Abstract
The development of multifunctional packaging addresses the demand for solutions that combine protection, sustainability, and functionalities such as antimicrobial activity. In this context, films of hybrid composites (HC) based on a poly(lactic acid)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blend - PLA/PHBV (70/30 wt/wt), sepiolite nanoparticles (SEP, 5 phr), and different contents (3 and 5 phr) of micrometric zinc oxide (ZnO) were produced via melt mixing and compression molding. The influence of ZnO content on rheological, thermal, mechanical, and water vapor permeability properties, as well as its role as an antimicrobial agent, was evaluated. Despite ZnO acting as a catalyst for PLA degradation during processing, the HC with 3 phr of ZnO demonstrated significant improvements, including a 16% in elastic modulus and a 21% increase in tensile strength (compared to PLA/PHBV blend), an 85% reduction in water vapor permeability (compared to PLA/PHBV/SEP nanocomposite), good processability, and effective inhibition of bacterial growth on the film surface. These results highlight the potential of HC with 3 phr of ZnO for producing multifunctional packaging using conventional melt-processing techniques.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Nanocomposite Films for Food Packaging · Microplastics and Plastic Pollution
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de São Carlos, Brasil
Universidade Estadual de Ponta Grossa, Brasil
Universidade Federal de São Paulo, Brasil
Universidade Federal de São Carlos, Brasil; Universidade Federal de São Carlos, Brasil
Funding
CAPES · CNPq · FAPEMIG
References (64)
Show source-provided references
1. Fabra MJ · 2014 · 476
2. Reducing environmental plastic pollution by designing polymer materials for managed end-of-life
3. Poly(lactic acid) modifications10.1016/j.progpolymsci.2009.12.003 ↗
4. Blending of polyhydroxybutyrate-co-valerate with polylactic acid for packaging applications - reflections on miscibility and effects on the mechanical and barrier properties10.15255/CABEQ.2014.2257 ↗
5. Influence of nanoparticles and their selective localization on the structure and properties of polylactide-based blend nanocomposites10.1016/j.compositesb.2021.108845 ↗
6. Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends10.1016/j.progpolymsci.2014.04.002 ↗
7. Uneven distribution of nanoparticles in immiscible fluids: morphology development in polymer blends10.1016/j.polymer.2008.12.029 ↗
8. Molecular access to intercrystalline tunnels of sepiolite10.1039/b003197f ↗
9. Thermal and morphological characterisation of organically modified sepiolite10.1016/j.micromeso.2007.04.020 ↗
10. Argilas especiais: o que são, caracterização e propriedades10.1590/S0100-40422007000100026 ↗
11. Recent researches on antimicrobial nanocomposite and hybrid materials based on sepiolite and palygorskite10.1016/j.clay.2022.106454 ↗
12. Effect of sepiolite on the crystallization behavior of biodegradable poly(lactic acid) as an efficient nucleating agent10.1002/pen.23981 ↗
13. Fire retardancy behavior of PLA based nanocomposites10.1016/j.polymdegradstab.2011.12.021 ↗
14. Nanocomposites of PLA and PCL based on montmorillonite and sepiolite10.1016/j.msec.2008.11.005 ↗
15. Poly(lactic acid)/clay nanocomposites: effect of nature and content of clay on morphology, thermal and thermo-mechanical properties10.1016/j.msec.2012.04.047 ↗
16. PLA/sepiolite and PLA/calcium carbonate nanocomposites: a comparison study10.1002/app.38866 ↗
17. Effect of sepiolite on the biodegradation of poly(lactic acid) and polycaprolactone10.1016/j.polymdegradstab.2010.07.004 ↗
18. Influence of sepiolite on thermal, mechanical and biodegradation properties of poly-3-hydroxybutyrate-co-3-hydroxyvalerate nanocomposites10.1016/j.clay.2018.01.010 ↗
19. Characterization of physical and biodegradation properties of poly-3-hydroxybutyrate-co-3-hydroxyvalerate/sepiolite nanocomposites10.1016/j.msec.2017.03.193 ↗
20. Poly(hydroxybutyrate-co-hydroxyvalerate)-based nanocomposites for antimicrobial active food packaging containing oregano essential oil10.1016/j.fpsl.2020.100602 ↗
21. Release of oregano essential oil from PHBV films in simulated food conditions10.1590/0104-1428.20220060 ↗
22. Effect of the addition of sepiolite on the morphology and properties of melt compounded PHBV/PLA blends10.1002/pc.24538 ↗
23. Combined effects of sepiolite and Cloisite 30B on morphology and properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/polylactide blends10.1016/j.polymdegradstab.2018.04.017 ↗
24. A Review on antimicrobial packaging for extending the shelf life of food10.3390/pr11020590 ↗
25. A review of poly(lactic acid)-based materials for antimicrobial packaging
26. Natural antimicrobial systems protected by complex polyhydroxyalkanoate matrices for food biopackaging applications: a review10.1016/j.ijbiomac.2023.123418 ↗
27. Antistatic and antimicrobial packaging of PLA/PHBV blend-based graphene nanoplatelets nanocomposites
28. Biodegradation behavior and life cycle assessment of PLA/PHBV/Carbonaceous materials hybrid nanocomposites for antimicrobial multifunctional packaging10.1007/s10924-024-03286-6 ↗
29. Novel antimicrobial packaging film based on porous poly(lactic acid) nanofiber and polymeric coating for humidity-controlled release of thyme essential oil
30. Recent advances in the antimicrobial and antioxidant capabilities of PLA based active food packaging
31. High-performance polylactide/ZnO nanocomposites designed for films and fibers with special end-use properties10.1021/bm2001445 ↗
32. Accelerated disintegration of compostable Ecovio polymer by using ZnO particles as filler10.1016/j.polymdegradstab.2021.109501 ↗
33. PLA composites: from production to properties10.1016/j.addr.2016.04.003 ↗
34. Catalytic effect of nanosized ZnO and TiO2 on thermal degradation of poly(lactic acid) and isoconversional kinetic analysis10.1016/j.tca.2018.12.008 ↗
35. Analysis of the degradation during melt processing of PLA/biosilicate composites10.3390/jcs3020052 ↗
36. Toughened poly(lactic acid)/thermoplastic polyurethane uncompatibilized blends10.1515/polyeng-2021-0262 ↗
37. Mechanical and electrical multifunctional poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-multiwall carbon nanotube nanocomposites10.1002/pen.23084 ↗
38. 2018
39. 2024
40. Synergistic effect of compatibilizer and Cloisite 30B on the functional properties of poly(3‐hydroxybutyrate‐ co‐3‐hydroxyvalerate)/polylactide blends10.1002/pen.23776 ↗
41. Degradation of PLA/ZnO and PHBV/ZnO composites prepared by melt processing10.1016/j.arabjc.2017.07.001 ↗
42. Assessment of localization and degradation of ZnO nano-particles in the PLA/PCL biocompatible blend through a comprehensive rheological characterization10.1016/j.polymdegradstab.2018.10.007 ↗
43. Morphology and property changes in PLA/PHBV blends as function of blend composition10.1007/s10965-018-1586-3 ↗
44. Biosynthesis of zinc oxide nanoparticles using culture filtrates of Aspergillus niger: antimicrobial textiles and dye degradation studies10.1016/j.onano.2018.06.001 ↗
45. Thermal characterization of sepiolite samples10.1080/15567036.2010.512907 ↗
46. Zinc oxide nanoparticles: synthesis, antimicrobial activity and food packaging applications10.1007/s11947-012-0797-6 ↗
47. Morphology and properties of injection molded solid and microcellular polylactic acid/polyhydroxybutyrate-valerate (PLA/PHBV) blends10.1021/ie301573y ↗
48. Morphology and thermal degradation studies of melt-mixed poly(hydroxybutyrate-co-valerate) (PHBV)/poly(e-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler10.1007/s10853-015-8950-z ↗
49. The effects of process engineering on the performance of PLA and PHBV blends10.1002/mame.201000417 ↗
50. Development and characterization of PLA composites with high contents of a Brazilian refractory clay and improved fire performance10.1590/1980-5373-mr-2021-0444 ↗
51. Quiescent and shear-induced non-isothermal crystallization kinetics of PLA/HNT nanocomposites10.1007/s10973-023-12648-6 ↗
52. In situ grafting approach for preparing PLA/PHBV degradable blends with improved mechanical properties10.1007/s00289-021-03958-6 ↗
53. Thermal properties and cold crystallization kinetics of surface-treated banana fiber (BF)-reinforced poly(lactic acid) (PLA) nanocomposites10.1007/s10973-013-3102-7 ↗
54. Auras R · 2010
55. Blends and composites of polyhydroxyalkanoates (PHAs) and their applications10.1016/j.eurpolymj.2021.110824 ↗
56. Poly(lactic acid) crystallization10.1016/j.progpolymsci.2012.07.005 ↗
57. Sustainable PHBV/cellulose acetate blends: effect of a chain extender and a plasticizer10.1021/acsomega.9b03369 ↗
58. Study of silane treatment on poly‐lactic acid(PLA)/sepiolite nanocomposite thin films10.1002/app.41428 ↗
59. Koros WJ · 1996
60. A study of morphological, thermal, rheological and barrier properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/polylactide blends prepared by melt mixing10.1016/j.polymertesting.2013.04.004 ↗
61. Facile modification of sepiolite and its application in superhydrophobic coatings10.1016/j.clay.2019.03.016 ↗
62. Barrier properties and characterizations of poly(lactic acid)/ZnO nanocomposites10.3390/molecules25061310 ↗
63. Studies of polylactide/zinc oxide nanocomposites: influence of surface treatment on zinc oxide antibacterial activities in textile nanocomposites10.1002/app.41776 ↗
64. PLA-ZnO nanocomposite films: water vapor barrier properties and specific end-use characteristics10.1016/j.eurpolymj.2013.08.005 ↗