journal article·2022Open access

Electroless Plating of Ni-P and Ni-P-PTFE on Micro-Arc Oxidation Coatings for Improved Tribological Performance

Zhaoxiang Chen, Li Zhu, Limei Ren, Jialin Liu

Materials Research· Volume 25

Abstract

Although micro-arc oxidation (MAO) coatings are widely used for anti-wear protection of metals, they usually contain lots of pores and exhibit high coefficient of friction. In this work, porous MAO coatings consisting of Al2TiO5 were fabricated on the titanium substrate, and then Ni-P and Ni-P-polytetrafluoroethylene (PTFE) were deposited via electroless plating to fill MAO pores and improve the tribological performance. Electroless deposited Ni-P has high wear resistance and the incorporated PTFE particles have self-lubricating property. Results show that the micro-pores of the MAO coating were completely filled by deposited Ni-P and Ni-P-PTFE, and the self-lubricating PTFE particles distributed uniformly in the coating. For the MAO-Ni-P-PTFE coating, the MAO and Ni-P components mechanically interlocked and played a load-carrying role during the tribological test, and the dispersed PTFE particles produced low friction. Compared with the MAO and MAO-Ni-P coatings, the MAO-Ni-P-PTFE coating exhibited much lower coefficient of friction and wear rate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Lubricants and Their Additives · Electrodeposition and Electroless Coatings · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Yanshan University, China; Yanshan University, China

Yanshan University, China; Ministry of Education of China, China

References (33)

Show source-provided references
1. A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy
2. On the characteristics of titanium alloys for the aircraft applications10.1016/j.matpr.2017.07.249 ↗
3. Attributes, characteristics, and applications of titanium and its alloys10.1007/s11837-010-0071-1 ↗
4. Bone regeneration performance of surface-treated porous titanium10.1016/j.biomaterials.2014.04.054 ↗
5. Friction and wear behaviors of titanium micro-arc oxidation coatings under different friction conditions
6. A review on adhesion strength of PEO coatings by scratch test method
7. Preparation process and wear resistance optimization of titanium micro-arc oxidation film
8. Formation and characterization of wear-resistant PEO coatings formed on β-titanium alloy at different electrolyte temperatures10.1016/j.apsusc.2012.07.104 ↗
9. Microstructure and tribological properties of micro-arc oxidation TiO2 coating before and after SiC particles incorporation
10. Preparation and corrosion resistance of MAO/Ni-P composite coat on Mg alloy10.1016/j.apsusc.2013.04.044 ↗
11. Osseointegration of bioactive microarc oxidized amorphous phase/TiO2 nanocrystals composited coatings on titanium after implantation into rabbit tibia10.1007/s10856-014-5154-z ↗
12. Microstructure and elevated temperature tribological behavior of TiO2/Al2O3 composite ceramic coating formed by microarc oxidation of Ti6Al4V alloy10.1016/j.surfcoat.2015.03.044 ↗
13. Research progress of micro-arc oxidation ceramic coatings and composite coatings on titanium alloy
14. Effect of ZrO2 particle on the performance of micro-arc oxidation coatings on Ti6Al4V10.1016/j.apsusc.2015.03.051 ↗
15. Tribological properties of MAO/MoS2 self-lubricating composite coating by microarc oxidation and hydrothermal reaction
16. Review of plasma electrolytic oxidation of titanium substrates: mechanism, properties, applications and limitations10.1016/j.apsadv.2021.100121 ↗
17. Improving the tribological properties of spark-anodized titanium by magnetron sputtered diamond-like carbon10.3390/coatings8020083 ↗
18. Investigation of a self-lubricating coating for diesel engine pistons, as produced by combined microarc oxidation and electrophoresis10.1016/j.wear.2017.10.012 ↗
19. The effect of graphite particle size on the corrosion and wear behaviour of the PEO-EPD coating fabricated on commercially pure zirconium10.1016/j.surfcoat.2019.02.033 ↗
20. Electroless nickel plating-a review10.1007/s12633-015-9367-7 ↗
21. Effect of hydrophobicity on the corrosion resistance of microarc oxidation/self-assembly/nickel composite coatings on magnesium alloys10.1016/j.molliq.2021.115606 ↗
22. Evaluation of microstructural effects on corrosion behavior of AZ31B magnesium alloy with a MAO coating and electroless Ni-P plating10.1016/j.jmrt.2020.09.099 ↗
23. Microstructure and properties of duplex Ni-P-TiO2/Ni-P nanocomposite coatings10.1590/1980-5373-mr-2018-0748 ↗
24. Effect of temperature on the friction and wear behavior of electroless Ni-P-MoS2-CaF2 self-lubricating composite coatings10.1016/j.triboint.2018.07.026 ↗
25. Study of corrosion and friction reduction of electroless Ni-P coating with molybdenum disulfide nanoparticles10.1007/s11998-008-9131-7 ↗
26. Preparation and properties of Ni/P/single-walled carbon nanotubes composite coatings by means of electroless plating10.1016/j.tsf.2004.02.016 ↗
27. A novel multifunctional PTFE/PEO composite coating prepared by one-step method10.1016/j.surfcoat.2016.05.001 ↗
28. Characterization of electroless Ni-P-PTFE composite coating10.1023/A:1006530732724 ↗
29. Antifriction and wear characteristics of electrolessly-deposited Ni-P with PTFE composites10.1007/s11249-011-9759-9 ↗
30. Surface characterization and specific wear rate prediction of r-GO/AZ31 composite under dry sliding wear condition10.1016/j.surfin.2017.01.004 ↗
31. Electroless codeposition of Ni-P composite coatings: effects of graphene and TiO2 on the morphology, corrosion, and tribological properties10.1007/s11661-019-05161-9 ↗
32. Electroless Ni-P-PTFE-Al2O3 dispersion nanocomposite coating for corrosion and wear resistance10.1007/s11665-013-0710-0 ↗
33. Corrosion performance of electroless Ni-P on polymer coating of MAO coated AZ31 magnesium alloy10.1016/j.surfcoat.2013.06.087 ↗