journal article·2022Open access

Experimental Investigations on µED Milling of Inconel 718 with Nano SiC Abrasive Mixed Dielectric

B. Elumalai, S. Gowri, P. Hariharan, K.V. Arun Pillai

Materials Research· Volume 25

Abstract

Micro electro-discharge machining is one of the efficient processes to create three-dimensional micro features of metallic components for various applications. Powder mixed EDM improves the machining rate and reduces the surface roughness by evenly distributing the spark. The present studydemonstrates the effect of SiC nanopowder on the machining of Inconel 718 at different Discharge Energy Regimes (DER). Significant improvement in MRR, reduction in TWR and surface roughness were observed in nanopowder mixed micro-EDM (NPMμEDM) compared with micro-EDM. The nano additive considerably improved the Material Removal Rate (MRR) by163% and reduced the Tool Wear Rate (TWR)and surface roughness by 24%, 17% respectively. Models were created to predict the Surface Roughness in NPMμEDM using two different approaches namely Support Vector Regression (SVR) and Random Forest Machine (RFM). Both SVR and RFM models were able to predict the Ra value with better accuracies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Easwari Engineering College, India

Anna University, India

References (33)

Show source-provided references
1. Machining of titanium and titanium alloys by electric discharge machining process: a review
2. Machinability and energy efficiency in micro-EDM milling of zirconium boride reinforced with silicon carbide fibers10.3390/ma12233920 ↗
3. On geometrical characteristics of WC-Co round cavities after ED-machining with different grades of CuW electrodes10.1590/1980-5373-mr-2020-0041 ↗
4. μED milling of Ti-6Al-4V using cryogenic-treated Wc tool and nano-graphene powder-mixed dielectricat different discharge energy regimes10.1007/s00170-019-03327-8 ↗
5. Machining performance of Inconel 718 using graphene nanofluid in EDM10.1080/10426914.2020.1711924 ↗
6. Machined surface quality in nano aluminum mixed electrical discharge machining10.1016/j.promfg.2016.12.061 ↗
7. Comparison of micro-EDM characteristics of inconel 706 between EDM Oil and an al powder-mixed dielectric
8. Influence of micro size titanium powder-mixed dielectric medium on surface quality measures in EDM process10.1007/s00170-020-05698-9 ↗
9. Microstructure characterization and maximization of the material removal rate in nano-powder mixed EDM of Al-Mg 2 Si metal matrix composite: ANFIS and RSM approaches10.1007/s00170-018-3130-3 ↗
10. Performance and surface integrity of wire electrical discharge machining of thin Ti6Al4V plate using coated and uncoated wires10.1590/1980-5373-mr-2019-0127 ↗
11. Critical analysis of surface integrity parameters and dimensional accuracy in powder-mixed EDM10.1080/10426914.2020.1718695 ↗
12. Experimental Investigation of white layer formation on machining silicon steel in PMEDM process10.1007/s12633-020-00740-7 ↗
13. Experimental investigation of silicon powder mixed EDM using graphene and CNT nano particle coated electrodes10.1007/s12633-020-00658-0 ↗
14. Experimental investigations on nano powder mixed Micro-Wire EDM process of inconel-718 alloy
15. Influence of graphite powder mixed EDM on the surface integrity characteristics of Inconel 62510.1080/02726351.2016.1150371 ↗
16. Application of powder suspended in dielectric fluid for fine finish micro-EDM of Inconel 71810.1007/s00170-014-6145-4 ↗
17. Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm
18. Surface roughness prediction by extreme learning machine constructed with abrasive water jet10.1016/j.precisioneng.2015.06.013 ↗
19. Use of machine learning algorithm for the better prediction of SR peculiarities of WEDM of Nimonic-90 superalloy10.5604/01.3001.0013.1422 ↗
20. An effective ABC-SVM approach for surface roughness prediction in manufacturing processes
21. Surface roughness prediction of machined aluminum alloy with wire electrical discharge machining by different machine learning algorithms10.1016/j.jmrt.2020.08.098 ↗
22. Modelling and experimental investigation on the effect of nanopowder-mixed dielectric in micro-electrodischarge machining of tungsten carbide10.1243/09544054JEM1878 ↗
23. Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy10.1080/10426914.2016.1198018 ↗
24. Enrichment of material subtraction rate on Eglin steel using electrical discharge machining process through modification of electrical circuits10.1016/j.matpr.2020.07.670 ↗
25. Experimental studies on graphite powder-mixed electro-discharge machining of Inconel 718 super alloys: comparison with conventional electro-discharge machining10.1177/0954408918787104 ↗
26. Evaluation of EDM process parameters on titanium alloy through Taguchi approach10.1016/j.matpr.2020.10.737 ↗
27. Surface characteristics of Ti-6Al-4V by SiC abrasive mixed EDM with magnetic stirring10.1080/10426914.2016.1151043 ↗
28. Processing characteristics of micro electrical discharge machining for surface modification of TiNi shape memory alloys using a TiC powder dielectric
29. Surface modification for osseointegration of Ti6Al4V ELI using powder mixed sinking EDM10.1016/j.jmbbm.2020.104145 ↗
30. Micro hole fabrication in TiN-Al2O3 ceramic composite by SiC powder assisted micro- EDM10.1088/2631-8695/ab6cec ↗
31. Micro-EDM by using laminated 3D microelectrodes with deionized water containing B4C powder10.1007/s00170-018-2581-x ↗
32. Quantification of surface damage of tool steels after EDM10.1016/0890-6955(88)90050-8 ↗
33. Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy10.1007/s00170-009-2298-y ↗