Preparation of Diatom-Doped Bio-Nanocomposite Materials for Bone Tissue Scaffolds
Source abstract
Abstract
Naturally sourced materials have an important place in bone tissue engineering due to their biocompatibility and biodegradability. Non-diatom, diatom-doped chitosan/hydroxyapatite (CS/HAp) and collagen/chitosan/hydroxyapatite (Col/CS/HAp) as three-dimensional tissue scaffolds were produced by freeze drying technique. It was determined by SEM analysis that CS/HAp, CS/HAp/Di, Col/CS/HAp, Col/CS/HAp/Di scaffolds have 160 μm, 130 μm, 390 μm and 340 μm pores, respectively. The diatoms in the structure have approximately 9-16 μm in length, 8-20 μm in diameter and nanopore sizes of 260-330 nm. Cell culture studies were performed using the 3T3 cell line to study the non-toxic nature of biocomposite scaffolds that support cell attachment and proliferation. The cells in the scaffolds without diatom proliferate in a reticulated manner, whereas in the scaffolds containing diatom the cells were wrapped around the scaffold like a cover. The suggested scaffolds have the potential to meet the basic requirements in biocompatibility, cytocompatibility and interconnected pore structure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Collagen: Extraction and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Pamukkale University, Turkey
References (64)
Show source-provided references
1. Bioresorbable composite bone paste using polysaccharide based nano hydroxyapatite10.1016/j.biomaterials.2003.10.016 ↗
2. Bone tissue engineering: scaffold preparation using chitosan and other biomaterials with different design and fabrication techniques10.1016/j.ijbiomac.2018.08.056 ↗
3. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints10.1016/S0142-9612(02)00148-5 ↗
4. A collagenglycosaminoglycan co-culture model for heart valve tissue engineering applications10.1016/j.biomaterials.2005.10.031 ↗
5. Characterization of a soft elastomer poly (glycerol sebacate) designed to match the mechanical properties of myocardial tissue10.1016/j.biomaterials.2007.09.010 ↗
6. Development and therapeutic applications of advanced biomaterials
7. Ratner BD · 2013
8. Micellization behavior of tertiary amine-methacrylate-based block copolymers characterized by small-angle X-ray scattering and dynamic light scattering10.1016/j.matchemphys.2012.12.019 ↗
9. Self-assembled and nanostructured copolymer aggregations of the tertiary amine methacrylate based triblock copolymers10.1080/00032719.2015.1046552 ↗
10. Tissue engineering-current challenges and expanding opportunities10.1126/science.1069210 ↗
11. Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2003.12.005 ↗
12. Osteoinduction, osteoconduction and osseointegration10.1007/s005860100282 ↗
13. Biomaterial developments for bone tissue engineering10.1016/S0142-9612(00)00102-2 ↗
14. Hydrogel: Preparation, characterization, and applications: a review10.1016/j.jare.2013.07.006 ↗
15. Bio-based materials with novel characteristics for tissue engineering applications–A review10.1016/j.ijbiomac.2017.02.048 ↗
16. Overview of natural hydrogels for regenerative medicine applications10.1007/s10856-019-6318-7 ↗
17. Development of a novel hybrid bioactive hydrogel for future clinical applications10.1177/0885328218794163 ↗
18. Gok C · 2014
19. A biomimetic method of hydroxyapatite powders synthesized in simulated body fluid10.4028/www.scientific.net/KEM.297-300.1371 ↗
20. Diatom shell incorporated PHBV/PCL-pullulan co-electrospun scaffold for bone tissue engineering10.1016/j.msec.2019.03.046 ↗
21. Influence of geometry on mechanical properties of bio-inspired silica-based hierarchical materials10.1088/1748-3182/7/3/036024 ↗
22. Processing and characterization of diatom nanoparticles and microparticles as potential source of silicon for bone tissue engineering10.1016/j.msec.2015.10.040 ↗
23. Adsorptive removal of thorium (IV) using calcined and flux calcined diatomite from Turkey: evaluation of equilibrium, kinetic and thermodynamic data10.1016/j.clay.2012.05.012 ↗
24. Porous silica microshells from diatoms as biocarrier for drug delivery applications10.1016/j.powtec.2011.04.023 ↗
25. Applications of diatoms and silica nanotechnology in biosensing, drug and gene delivery, and formation of complex metal nanostructures10.1016/j.trac.2011.04.015 ↗
26. Diatomaceous lessons in nanotechnology and advanced materials10.1002/adma.200803778 ↗
27. Nanoparticles and their potential for application in bone10.2147/IJN.S34127 ↗
28. A comprehensive biological evaluation of ceramic nanoparticles as wear debris10.1016/j.nano.2011.04.005 ↗
29. Evaluation of injectable silica-embedded nanohydroxyapatite bone substitute in a rat tibia defect model10.2147/IJN.S19743 ↗
30. Chemical characterization of silicon-substituted hydroxyapatite10.1002/(SICI)1097-4636(19990315)44:4<422::AID-JBM8>3.0.CO;2-# ↗
31. Modified composite microspheres of hydroxyapatite and poly(lactide-co-glycolide) as an injectable scaffold10.1016/j.apsusc.2013.12.045 ↗
32. In vitro study of 3D PLGA/n-HAp/β-TCP composite scaffolds with etched oxygen plasma surface modification in bone tissue engineering10.1016/j.apsusc.2015.12.243 ↗
33. Scaffolds in tissue engineering of blood vessels10.1139/Y10-073 ↗
34. Hyaluronic acid hydrogels for biomedical applications10.1002/adma.201003963 ↗
35. Mucoadhesion and drug permeability of free mixed films of pectin and chitosan: an in vitro and ex vivo study10.1016/j.ejpb.2008.09.002 ↗
36. Scaffolds for bone tissue engineering: role of surface patterning on osteoblast response10.1039/c3ra23315d ↗
37. Microstructure and mechanical properties of three porous Si3N4 ceramics fabricated by different techniques10.1016/j.msea.2012.03.114 ↗
38. In vitro characterization of chitosan–gelatin scaffolds for tissue engineering10.1016/j.biomaterials.2005.05.036 ↗
39. Vieira S · 2017
40. Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing10.1038/s41467-018-03759-y ↗
41. 3D bioprinting of collagen to rebuild components of the human heart10.1126/science.aav9051 ↗
42. PGA-incorporated collagen: toward a biodegradable composite scaffold for bone-tissue engineering10.1002/jbm.a.35736 ↗
43. Bilayered nanofibrous 3D hierarchy as skin rudiment by emulsion electrospinning for burn wound management10.1039/C7BM00174F ↗
44. Collagen-reinforced electrospun silk fibroin tubular construct as small calibre vascular graft10.1002/mabi.201200195 ↗
45. Entrapment of collagen on polylactic acid 3D scaffold surface as a potential artificial bone replacement10.1016/j.matpr.2020.07.263 ↗
46. On the effects of UV-C and pH on the mechanical behavior, molecular conformation and cell viability of collagen-based scaffold for vascular tissue engineering10.1002/mabi.200900248 ↗
47. Advanced collagen-based biomaterials for regenerative biomedicine10.1002/adfm.201804943 ↗
48. In vitro evaluation for apatite-forming ability of cellulose-based nanocomposite scaffolds for bone tissue engineering10.1016/j.ijbiomac.2016.01.102 ↗
49. Highly porous biocomposite scaffolds fabricated by chitosan/alginate/diatom for tissue engineering
50. Synthesis and characterization of porous cytocompatible scaffolds from polyvinyl alcohol–chitosan10.1007/s12034-018-1709-9 ↗
51. Development of nanocomposite scaffolds based on TiO2 doped in grafted chitosan/hydroxyapatite by freeze drying method and evaluation of biocompatibility10.1016/j.ijbiomac.2017.03.067 ↗
52. Development and investigation of novel alginate-hyaluronic acid bone fillers using freeze drying technique for orthopedic field
53. Macro-and micromechanical modelling of HA-Elastin scaffold fabricated using freeze drying technique
54. Structural, electrical and optical properties of thermally evaporated CdSe and In-doped CdSe thin films
55. Macrophage-driven biomaterial degradation depends on scaffold microarchitecture10.3389/fbioe.2019.00087 ↗
56. Synthesis, characterization and osteoblastic activity of polycaprolactone nanofibers coated with biomimetic calcium phosphate10.1016/j.actbio.2009.04.037 ↗
57. Correlation of visual in vitro cytotoxicity ratings of biomaterials with quantitative in vitro cell viability measurements10.1007/s10565-007-9040-z ↗
58. Bacterial cellulose and bacterial cellulosechitosan membranes for wound dressing applications10.1016/j.carbpol.2013.01.076 ↗
59. Synthesis, biological evaluation and molecular docking of novel thiophene-based indole derivatives as potential antibacterial, GST inhibitor and apoptotic anticancer agents10.1002/slct.202001523 ↗
60. Preparation and characterization of diatomite and hydroxyapatite reinforced porous polyurethane foam biocomposites10.1038/s41598-020-70421-3 ↗
61. Structural and electronic properties of nano hydroxyapatite10.12693/APhysPolA.137.1017 ↗
62. Nanocrystalline hydroxyapatite powders by a chitosan–polymer complex solution route: synthesis and characterization10.1016/j.solidstatesciences.2009.02.003 ↗
63. Bio-mimetic composite scaffold from mussel shells, squid pen and crab chitosan for bone tissue engineering10.1016/j.ijbiomac.2015.07.012 ↗
64. Effect of precipitation method on properties of hydroxyapatite powders10.12693/APhysPolA.123.371 ↗