journal article·2024Open access

Investigation the Effect of TiC on Some Properties of ZA-27 Alloy Prepared By Powder Metallurgy Method

Asaad Kadhim Eqal, Jawdat Ali Yagoob, Haidar Akram Hussein

Materials Research· Volume 27

Abstract

The existing work is dedicated toward the manufacture of ZA-27/TiC as composites material via powder metallurgy. A mixture of Zn and Al with 63 and 27 wt%, respectively, is ball milled for 4 hrs at 145 rpm. Then, samples with disk-like shapes were made through pressing under 600 MPa and afterward sintered at 336 °C for 90 minutes in an electric furnace in argon gas. Other three groups from the above Zn and Al mixture ratio were prepared but with the addition of 3, 6, and 9 wt% TiC particles independently. The group's samples were prepared at the same conditions above. Hardness, density, and porosity microstructure observations, including optical and SEM-Mapping techniques were utilized to validate the effect of TiC particle additions with the listed above contents on the prepared ZA-27 alloy properties. The practical density of the prepared ZA-27 alloy is decreased basically owing to the used powder metallurgy route and with a lesser degree due to TiC addition. In contrast, the porosity is increased. But the hardness of the ZA-27 alloy is improved when TiC was added, and it was increased from 49.4 to 66 VHN with 0 to 9 wt% TiC addition. The optical microscope and SENM-Mapping facilities explained the distribution of co-existing Zn, Al, and TiC particles in the microstructures of the tested samples to improve the properties of ZA alloy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Southern Technical University, Iraq

Northern Technical University, Iraq

Middle Technical University, Iraq

References (25)

Show source-provided references
1. Review of microstructures and properties of zinc alloys10.3390/met10020253 ↗
2. Experimental studies and regression analysis on mechanical properties of MMCs based zinc-aluminium alloys with graphite particles reinforcement10.1016/j.matpr.2021.11.391 ↗
3. Graphite particles reinforced ZA-27 alloy composite materials for journal bearing applications10.1016/S0043-1648(98)00188-4 ↗
4. Manufacturing techniques for metal matrix composites (MMC): an overview
5. A study on damping behaviour of aluminite particulate reinforced ZA-27 alloy metal matrix composites10.1016/S0925-8388(00)01235-4 ↗
6. Aging microstructural characteristics of ZA-27 alloy and SiC/ZA-27 composite10.1016/S1003-6326(06)60017-4 ↗
7. Zinc-aluminum (ZA-27)-based metal matrix composites: a review article of synthesis, reinforcement, microstructural, mechanical, and corrosion characteristics10.1007/s00170-018-2760-9 ↗
8. The effect of milling time on the mechanical properties of ZA27/Al2O3 nano-composites
9. An investigation into the effects of graphite particles on the damping behavior of ZA-27 alloy composite material10.1016/j.matdes.2010.07.006 ↗
10. Microstructures and mechanical properties of ZA27-Al2O3 composites obtained by powder metallurgy process10.2298/SOS1101063B ↗
11. Mechanical properties of AS-CAST ZA-27/Gr/SiCp hybrid composite for the application of journal bearing
12. Characterization of Za-27 alloy reinforced with MgO particles by stir casting technique
13. Synthesis and characterization of nano-sized Al2O3 particle reinforced ZA-27 metal matrix composites10.1016/j.mspro.2015.06.037 ↗
14. Bhaskar S · 2017 · 228
15. Influence of quarry dust-silicon carbide weight percentage on the mechanical properties and tribological behavior of stir cast ZA-27 alloy based hybrid composites
16. Synthesis and characterization of ZA-27 alloy matrix composites reinforced with zinc oxide nanoparticles
17. Fabrication and wear properties of ZA-27 alloy matrix hybrid composite reinforced with nanoparticles10.30772/qjes.v11i4.572 ↗
18. Preparation and characterization of ZA27-alumina-graphite reinforced hybrid composites10.1016/j.matpr.2019.06.277 ↗
19. The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nano-composites produced by powder metallurgy10.1177/00219983211015719 ↗
20. The effect of carbon nanotube amount in machining of ZA-27 matrix carbon nanotube reinforced nano composite
21. Prediction of the solidification mechanism of ZA alloys using Ansys fluent
22. Design, construction and performance analysis of a 5 kg laboratory ball mill
23. Yagoob JA · 2018
24. The effect of micro and nano size TiC additions on some properties of copper fabricated by powder metallurgy
25. Overview of conventional technologies using the powders of metals, their alloys and ceramics in Industry 4.0 stage