journal article·2013-01-22Open access

Aqueous dispersion of red clay-based ceramic powder with the addition of starch

Maria Victoria Alcantar Umaran, Ruben Labandera Menchavez

Materials Research· Volume 16· Issue 2

Abstract

The optimum dispersion and rheological properties of red clay-based ceramic suspension loaded with unary and binary starch were investigated in aqueous medium. The aqueous ceramic suspension was prepared consisting of red clay, quartz, feldspar, and distilled water. Using a polyelectrolyte dispersant (Darvan 821A), the ternary ceramic powder was initially optimized to give the smallest average particle size at 0.8 wt. (%) dispersant dosage as supported by sedimentation test. This resulted into an optimum high solid loading of 55 wt. (%). The addition of either unary or binary starches to the optimized ceramic slurry increased the viscosity but maintained an acceptable fluidity. The mechanism of such viscosity increase was found to be due to an adsorption of starch granules onto ceramic surfaces causing tolerable agglomeration. Correspondingly, the rheological evaluations showed that the flow behaviors of all starch-loaded ceramic slurries can be described using Herschel-Bulkley model. The parameters from this model indicated that all ceramic slurries loaded with starch are shear thinning that is required for direct casting process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Grouting, Rheology, and Soil Mechanics · Soil and Unsaturated Flow

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Capitol University, Philippines

MSU-Iligan Institute of Technology, Philippines

References (35)

Show source-provided references
1. Optimizing the Dispersion on an Alumina Suspension Using Commercial Polyvalent Electrolyte Dispersants10.1016/S0955-2219(98)00147-2 ↗
2. Bergstrom L. · 2001
3. Rheological behavior of aqueous suspensions of hydroxyapatite (HAP)
4. Influence of the Dispersant Structure on Properties of Electrostatically Stabilized Aqueous Alumina Suspensions10.1016/S0955-2219(96)00151-3 ↗
5. Rheological properties of slurries prepared using planetary mixer10.1016/j.ceramint.2003.11.008 ↗
6. Dispersion and rheological properties of concentrated silicon aqueous suspension10.1016/j.powtec.2005.10.005 ↗
7. Shqau K. · 2005 · 1
8. Dispersability of BaTiO3 Aqueous Slurries with Poly Ammonium Acrylate Based Dispersant10.2109/jcersj.111.811 ↗
9. YAG ceramic processed by slip casting via aqueous slurries10.1016/j.ceramint.2006.10.018 ↗
10. Janney MA
11. Dispersion mechanisms in aqueous alumina suspensions at high solids loadings10.1016/j.colsurfa.2005.08.039 ↗
12. Process control and optimized preparation of porous alumina ceramics by starch consolidation casting10.1016/j.jeurceramsoc.2011.05.018 ↗
13. Porous alumina ceramics prepared by wheat flour10.1016/j.jeurceramsoc.2010.03.020 ↗
14. Chemical analysis of clay resources of Iligan City and Lanao del Norte
15. Red clay-based porous ceramic with pores created by yeast-based foaming technique10.1007/s10853-010-4740-9 ↗
16. Stability of dispersions of colloidal alumina particles in aqueous suspensions10.1016/j.jcis.2005.04.091 ↗
17. Sedimentation, rheology and particle packing structure of aqueous Al2O3 suspensions10.1016/S0272-8842(03)00023-3 ↗
18. Pacut GA
19. Optimization of the rheological properties of alumina slurries for ceramic processing applications Part I: Slip-casting10.1016/S0955-2219(00)00185-0 ↗
20. X-ray Diffraction and Rheology Study of Highly Ordered Clay Platelet Alignment in Aqueous Solutions of Sodium Tripolyphosphate10.1021/la960995s ↗
21. A study on the interaction of feldspar and quartz with mixed anionic/cationic collector
22. A new method for determining the optimum dispersant concentration in aqueous grinding10.1016/S0032-5910(01)00457-0 ↗
23. Effect of polyelectrolyte mixtures on the electrokinetic potential and kinetics of flocculation of clay mineral particles10.1016/j.colsurfa.2011.01.051 ↗
24. Dispersion of aqueous nano-sized alumina suspensions using cationic polyelectrolyte10.1016/j.materresbull.2006.01.032 ↗
25. Comparison between techniques based in charge characterization and capillary suction time for assessing the dispersion characteristics of concentrated slurry10.1023/B:JMSC.0000020007.83933.1f ↗
26. Imaging the microscopic structure of shear thinning and thickening colloidal suspensions10.1126/science.1207032 ↗
27. Rheological characterization of ammonium polyacrylate dispersed concentrated alumina suspension10.1016/j.ceramint.2005.06.004 ↗
28. Menchavez RL
29. Evaluation of Time Independent Rheological Models Applicable to Fresh Self-Compacting Concrete
30. Current understanding of the mechanism of polysaccharide adsorption at the mineral/aqueous solution interface10.1016/j.minpro.2007.03.006 ↗
31. Starches from different botanical sources II: Contribution of starch structure to swelling and pasting properties10.1016/j.carbpol.2005.07.003 ↗
32. Influence of Amylopectin Structure and Amylose Content on the Gelling Properties of Five Cultivars of Cassava Starches10.1021/jf048376+ ↗
33. The adsorption of polysaccharides onto mineral surfaces: an acid/base interaction10.1016/S0301-7516(00)00018-1 ↗
34. Selective flocculation of ultrafine iron ore, I: Mechanism of adsorption of starch onto hematite10.1016/0927-7757(95)03111-P ↗
35. Behaviour of amylopectin and amylose components of starch in the selective flocculation of ultrafine iron ore10.1016/0301-7516(95)00096-8 ↗