TiO2 Thin Films by Atmospheric Pressure Chemical Vapor Deposition for Rear Surface Passivation of p-PERT Solar Cells
Source abstract
Abstract
The aim of this paper was to analyze the passivation of the rear face of silicon solar cells by TiO2 thin films produced by atmospheric pressure chemical vapor deposition (APCVD). A compact high-throughput APCVD system was employed to deposit the TiO2 films. Silicon solar cells with a n+pp+ PERT (passivated emitter rear totally-diffused) structure were produced and characterized. The use of TiO2 on the rear face resulted in a 0.5 mA/cm2 increase in short-circuit current density and a 0.5% absolute improvement in efficiency compared to devices without a passivation layer. Analyzing the internal quantum efficiency of the devices, we concluded that this economically technique provides passivation on the p+ surface, doped with boron, similar to that obtained with thermally grown silicon oxide films.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Pontifícia Universidade Católica do Rio Grande do Sul, Brasil
References (24)
Show source-provided references
1. 2023
2. State-of-the-art passivation strategies of c-Si for photovoltaic applications: a review10.1016/j.mssp.2022.107202 ↗
3. Development of silicon solar cells and photovoltaic modules in Brazil: analysis of a pilot production10.1590/S1516-14392012005000084 ↗
4. Fundamentals, present status and future perspective of TOPCon solar cells: a comprehensive review
5. A review of different types of solar cell materials employed in bifacial solar photovoltaic panel10.3390/en16083605 ↗
6. Moehlecke A · 1995 · 1242
7. Optimization of rear-side passivation for enhancing the performance of bifacial PERC+ solar cells
8. Influence of Al2O3/SiNx rear-side stacked passivation on the performance of polycrystalline PERC solar cells10.3390/en16196963 ↗
9. Titanium oxide: a re-emerging optical and passivating material for silicon solar cells10.1016/j.solmat.2016.05.006 ↗
10. Zanesco I · 2019 · 1
11. Excellent c-Si surface passivation by low-temperature atomic layer deposited titanium oxide10.1063/1.4885096 ↗
12. TiO2 antireflection coating deposited by electro-beam evaporation: thin film thickness effect on weighted reflectance and surface passivation of silicon solar cells
13. Light-enhanced surface passivation of TiO2-coated silicon10.1002/pip.1132 ↗
14. 21.3%-efficient n-type silicon solar cell with a full area rear TiOX/LiF/Al electron-selective contact10.1016/j.solmat.2019.110291 ↗
15. Effect of Al electrodes on surface passivation of TiOX selective heterocontacts for Si solar cells10.1002/pssr.202200304 ↗
16. Single-material TiO2 double-layer antireflection coatings10.1016/S0927-0248(02)00473-7 ↗
17. Characterization of TiO2 deposited on textured silicon wafers by atmospheric pressure chemical vapour deposition10.1016/j.solmat.2004.07.011 ↗
18. Hocine D · 2010 · 1
19. Ly M · 2007 · 1532
20. Technology evolution of the photovoltaic industry: learning from history and recent progress10.1002/pip.3626 ↗
21. Passivated emitter and rear totally diffused: PERT solar cell‑ an overview10.1007/s12633-022-02050-6 ↗
22. Cost-effective thin n-type silicon solar cells with rear emitter10.1590/1980-5373-mr-2019-0536 ↗
23. SiO2 surface passivation layers: a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
24. Dielectric surface passivation for silicon solar cells: a review