journal article·2024Open access

Effect of Substrate Preparation and the Conversion Coating on the Corrosion Resistance in Ringer's Solution of 304L Stainless Steel Coated with Alumina Film

Carlos M. S. Pereira, Gustavo F. Silva, Marília G. Diniz, Camila S. Silva, Antônio V. C. Braga, Lilian F. de Senna

Materials Research· Volume 27· Issue suppl 1

Abstract

This work aims to determine the best substrate preparation and conversion coatings that may enhance the anti-corrosive performance of alumina film/stainless steel substrate systems in Ringer’s solution. Boehmite, silica, silica/boehmite, and boehmite/silica conversion coatings were deposited on sanded or sandblasted 304L stainless steel samples, and the best results were further covered with alumina film for a long-time exposure evaluation. The best anti-corrosive performances for each substrate preparation were observed for the sandblasted sample covered with silica/boehmite conversion coating (JSB500) and the sanded sample covered with silica (LS500), which showed the highest global resistance (Rg) values (828 Ω.cm2 and 1837 Ω.cm2, respectively) and the smallest values of global capacitance, Cg (2.19 X 10-6 F.cm-2 and 3.37 X 10-9 F.cm-2, respectively). After covering with the alumina film and evaluating for 216 h in the corrosive medium, it was noted an increase in the Rg values for both systems (JSBA500 and LSBA500), likely due to the presence of a corrosion products layer. The presence of iron oxides in these conversion coatings led to a more stable alumina film. Comparing the selected coating systems, the LSBA500 exhibited an improved performance, reaching an increase of 85% in Rg and a decrease of 94% in Cg.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade do Estado do Rio de Janeiro, Brasil

References (48)

Show source-provided references
1. Mechanical properties of austenitic stainless steel 304L and 316L at elevated temperatures10.1016/j.jmrt.2015.04.001 ↗
2. Corrosion properties of polished and shot-peened austenitic stainless steel 304L and 316L with and without plasma nitriding10.1016/j.surfcoat.2017.01.050 ↗
3. A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications10.1016/j.msec.2013.06.002 ↗
4. Influence of substrate bias voltage on the properties of TiO2 deposited by radio-frequency magnetron sputtering on 304L for biomaterials applications10.1016/j.apsusc.2016.07.101 ↗
5. Thin films deposition on 304L stainless steel using e-gun technology for medical applications10.1088/1757-899X/591/1/012001 ↗
6. Corrosion behavior of different types of stainless steel in PBS solution10.3390/su14148935 ↗
7. Biomaterials: past successes and future problems10.1515/CORRREV.2003.21.2-3.97 ↗
8. Evaluación de tratamientos térmicos en aceros comerciales AISI 304l y AISI 316l para implantes óseos
9. Effects of surface treatment on corrosion resistance of 304L and 316L stainless steel implants in Hank’s solution
10. Study and characterization of mechanical and electrochemical corrosion properties of plasma sprayed hydroxyapatite coatings on AISI 304L stainless steel10.4028/www.scientific.net/JBBBE.35.20 ↗
11. Cross-section transmission electron microscopy characterization of the near-surface structure of medical Nitinol superelastic tubing10.1007/s10856-007-2008-y ↗
12. Preventing Staphylococcus aureus stainless steel‐associated infections in orthopedics: a systematic review and meta‐analysis of animal literature10.1002/jor.24999 ↗
13. Composite coatings of chitosan and silver nanoparticles obtained by galvanic deposition for orthopedic implants10.3390/polym14183915 ↗
14. Liang X · 2013
15. Review Paper: behavior of ceramic biomaterials derived from tricalcium phosphate in physiological condition10.1177/0885328208096798 ↗
16. A comprehensive review of fabrication techniques and their impact on mechanical behaviour and osteoregenerative applications of bioactive inorganic substituents10.1080/21663831.2023.2250110 ↗
17. Improvement in corrosion resistance of the 316L stainless steel by means of Al2O3 coatings deposited by the sol-gel method10.1016/S0040-6090(99)00230-8 ↗
18. Characterization of chemically bonded composite sol-gel based alumina coatings on steel substrates10.1016/S0257-8972(03)00663-7 ↗
19. Effect of sintering temperatures on corrosion and wear properties of sol-gel alumina coatings on surface pre-treated mild steel10.1016/j.corsci.2007.10.002 ↗
20. Dislich H · 1988
21. AES and FTIR characterization of sol-gel alumina films10.1016/j.jnoncrysol.2012.03.017 ↗
22. Sol-gel fabrication of compact, crack-free alumina film10.1016/j.materresbull.2006.08.005 ↗
23. Surface modification of aluminum alloys in molten salts containing CeCl310.1016/0040-6090(95)06932-1 ↗
24. Low pressure plasma spray coatings10.1016/S0040-6090(00)01452-8 ↗
25. Pretreatment effect of the pure titanium surface on hybrid coating adhesion based on tetraethoxysilane and methyltriethoxysilane10.1007/s11998-017-0035-2 ↗
26. The influence of heat treatment of inorganic conversion coatings produced by sol-gel dip coating on the anti-corrosive properties of alumina films deposited on steel substrate – Part I: single conversion coatings10.1016/j.surfcoat.2019.05.040 ↗
27. Development of conversion coating on mild steel prior to sol-gel nanostructured Al2O3 coating for enhancement of corrosion resistance10.1016/j.surfcoat.2011.04.087 ↗
28. The influence of heat treatment of inorganic conversion coatings produced by sol-gel dip coating on the anti-corrosive properties of alumina films deposited on steel substrate - Part II: silica/boehmite or boehmite/silica multilayered conversion coatings
29. Pitting corrosion resistance of AISI 316L stainless steel in Ringer’s solution after magnetoelectrochemical polishing10.5006/1.3360910 ↗
30. Retaining ionic concentration in vitro storage of tissues for microanalytical studies10.1046/j.1365-2818.1999.00461.x ↗
31. Titanium-magnesium based composites: mechanical properties and in vitro corrosion response in Ringer’s solution10.1016/j.msea.2013.02.040 ↗
32. Low-temperature synthesis of β-aluminas by a sol-gel technique10.1016/S0167-577X(96)00193-0 ↗
33. History and principles of the sol-gel process, and some new multicomponent oxide coatings10.1016/0022-3093(82)90242-3 ↗
34. Corrosion protection properties of silica coatings formed by sol-gel method on Al: the effects of acidity, withdrawal speed, and annealing temperature10.1016/j.porgcoat.2013.08.011 ↗
35. Effect of treatment baths nature on the characteristics of conversion coatings modified by electrolytic alumina deposits10.1016/S0010-938X(99)00124-9 ↗
36. Study of the corrosion behavior of titanium and some of its alloys for biomedical and dental implant applications10.1016/S0022-0728(99)00260-0 ↗
37. Electrical detection and characterization of bacterial adhesion using electrochemical impedance spectroscopy-based flow chamber10.1016/j.colsurfa.2008.01.005 ↗
38. Fabrication and coating adhesion study of superhydrophobic stainless steel surfaces: the effect of substrate surface roughness
39. Scrutinizing the importance of surface chemistry versus surface roughness for aluminium/sol-gel film adhesion
40. The adhesion performance of epoxy coating on AA6063 treated in Ti/Zr/V based solution10.1016/j.apsusc.2016.05.083 ↗
41. Superhydrophobic stearic acid deposited by dip-coating on AISI 304 stainless steel: electrochemical behavior in a saline solutions10.1590/1980-5373-mr-2022-0268 ↗
42. Enhancement of surface wettability via micro- and nanostrucutres by single point diamond turning10.1016/j.npe.2019.03.008 ↗
43. Electrochemical characteristics and surface morphology in non-chromate chemical conversion coating for Zn-electroplated steel sheets10.1016/S1003-6326(10)60243-9 ↗
44. The effects of aging time on the sol-gel properties and its relationship with the anti-corrosive performance of coatings prepared by sol-gel dip coating10.1016/j.jmrt.2023.10.292 ↗
45. Study of the active corrosion protection properties of epoxy ester coating with zeolite nanoparticles doped with organic and inorganic inhibitors10.1016/j.jtice.2017.12.023 ↗
46. Properties of the passive film on alloy 22 in chloride solutions obtained by electrochemical impedance10.1149/1.3581034 ↗
47. EIS study of effective capacitance and water uptake behaviors of silicone-epoxy hybrid coatings on mild steel10.1016/j.porgcoat.2015.04.004 ↗
48. Silva CS · 2021