journal article·2022Open access

Creep and Mechanical Behavior Study of Inconel 718 Superalloy

Tarcila Sugahara, Antônio Augusto Couto, Miguel Justino Ribeiro Barboza, Francisco Piorino Neto, Renata Jesuina Takahashi, Danieli Aparecida Pereira Reis

Materials Research· Volume 25

Abstract

Over the years, the demand for high engine efficiency has resulted in the development of new generation superalloys with improved elevated temperature properties, especially creep resistance. This study aimed to evaluate creep and mechanical behavior of Inconel 718 superalloy. Creep tests were performed at temperature range of 650 to 700 °C and stress range of 625 to 814 MPa. Hot tensile and oxidation tests were performed and the characterization techniques used in this study were scanning electron microscopy (SEM) for microstructural and fracture surface analysis, transmission electron microscopy (TEM) for precipitates analysis; grazing X-ray diffraction for analysis of oxide formation and Vickers microhardness. The analyze of stress exponent value (n = 36.48) and activation energy (Qc = 512.97 kJ/mol), suggested that creep mechanism at 650 °C was the climb dislocation mechanism. The Inconel 718 presented ductile fracture at 650 and 700 °C and intergranular fracture to 675 °C.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de São Paulo, Brasil

Universidade Presbiteriana Mackenzie, Brasil

Universidade de São Paulo, Brasil

Instituto Nacional de Pesquisas Espaciais, Brasil

References (34)

Show source-provided references
1. Sims CT · 1987
2. The effect of varying AI, Ti, and Nb content on the phase stability of INCONEL 71810.1007/BF02645133 ↗
3. High temperature materials for heavy duty diesel engines: historical and future trends10.1016/j.pmatsci.2018.10.004 ↗
4. An overview on welding of Inconel 718 alloy - effect of welding processes on microstructural evolution and mechanical properties of joints10.1016/j.matchar.2021.110997 ↗
5. Mechanical behavior of inconel 625 at elevated temperatures10.3390/met9030301 ↗
6. Study of the mechanical behavior of an inconel 718 aged superalloy submitted to hot tensile tests
7. Effect of double aging heat treatment on the short-term creep behavior of the inconel 71810.1007/s11665-016-2051-2 ↗
8. Evaluation of Inconel 718 creep behavior10.4028/www.scientific.net/DDF.326-328.525 ↗
9. Creep/fatigue accelerated failure of Ni-based superalloy turbine blade: microscopic characteristics and void migration mechanism
10. Creep behaviour and microstructural characterization of VAT 36 and VAT 32 superalloys10.3390/met8110877 ↗
11. Heat treatments effects on nickel-based superalloy inconel 713C10.3390/met9010047 ↗
12. Oliveira MM · 2017 · 197
13. Dissolution mechanisms and kinetics of δ phase in an aged Ni-based superalloy in hot deformation process10.1016/j.matdes.2018.06.058 ↗
14. Temperature prediction in Inconel 718 milling with microstructure evolution10.1007/s00170-018-1581-1 ↗
15. Characterization of the superalloy Inconel 718 after double aging heat treatment
16. Coarsening behavior of γ′ precipitates in the γ′+γ area of a Ni3Al-based alloy10.1016/j.jallcom.2018.08.265 ↗
17. Influence of stress on γ″ precipitation behavior in Inconel 718 during aging10.1016/j.jallcom.2018.01.030 ↗
18. Effect of heat-treatment on microstructural evolution and mechanical behaviour of severely deformed Inconel 71810.1016/j.msea.2018.01.007 ↗
19. Effect of shot peening on the oxidation behavior of thermal barrier coatings10.1016/j.apsusc.2015.06.113 ↗
20. Environmental enhancement of creep crack growth in inconel 718 by oxygen and water vapor10.1016/0956-716X(94)90257-7 ↗
21. Aging effects on the microstructure and creep behavior of Inconel 718 superalloy10.1016/j.msea.2008.04.097 ↗
22. Microstructural and mechanical properties of high-performance Inconel 718 alloy by cold spraying10.1016/j.jallcom.2019.04.045 ↗
23. Effects of post-processing route on fatigue performance of laser powder bed fusion Inconel 718
24. Niobium segregation in Inconel 71810.1023/A:1004648615561 ↗
25. Creep behavior evaluation and characterization of SiC film with Cr interlayer deposited by HiPIMS in Ti-6Al-4V alloy10.1016/j.surfcoat.2016.11.091 ↗
26. Creep behavior and surface characterization of a laser surface nitrided Ti-6Al-4V alloy10.1016/j.msea.2013.04.042 ↗
27. Investigation on the microstructure and creep behavior of laser remelted thermal barrier coating10.1016/j.surfcoat.2019.04.068 ↗
28. Creep property of Inconel 718 superalloy produced by selective laser melting compared to forging
29. Creep behavior of the inconel 718 superalloy10.4028/www.scientific.net/DDF.326-328.509 ↗
30. 2016
31. 2006
32. High temperature deformation of Inconel 71810.1016/j.jmatprotec.2006.04.072 ↗
33. Compensation effect in creep of conventional polycrystalline alloy 71810.1016/S1359-6462(00)00314-6 ↗
34. Effect of annealing treatment on microstructure evolution and creep behavior of a multiphase Ni3Al-based superalloy10.1016/j.msea.2018.11.126 ↗